mirror of https://github.com/hak5/openwrt-owl.git
763 lines
22 KiB
C
763 lines
22 KiB
C
/*
|
|
* ADM5120 HCD (Host Controller Driver) for USB
|
|
*
|
|
* Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This file was derived from: drivers/usb/host/ohci.h
|
|
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
|
|
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
|
|
* __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
|
|
* host controller implementation.
|
|
*/
|
|
typedef __u32 __bitwise __hc32;
|
|
typedef __u16 __bitwise __hc16;
|
|
|
|
/*
|
|
* OHCI Endpoint Descriptor (ED) ... holds TD queue
|
|
* See OHCI spec, section 4.2
|
|
*
|
|
* This is a "Queue Head" for those transfers, which is why
|
|
* both EHCI and UHCI call similar structures a "QH".
|
|
*/
|
|
|
|
#define TD_DATALEN_MAX 4096
|
|
|
|
#define ED_ALIGN 16
|
|
#define ED_MASK ((u32)~(ED_ALIGN-1)) /* strip hw status in low addr bits */
|
|
|
|
struct ed {
|
|
/* first fields are hardware-specified */
|
|
__hc32 hwINFO; /* endpoint config bitmap */
|
|
/* info bits defined by hcd */
|
|
#define ED_DEQUEUE (1 << 27)
|
|
/* info bits defined by the hardware */
|
|
#define ED_MPS_SHIFT 16
|
|
#define ED_MPS_MASK ((1 << 11)-1)
|
|
#define ED_MPS_GET(x) (((x) >> ED_MPS_SHIFT) & ED_MPS_MASK)
|
|
#define ED_ISO (1 << 15) /* isochronous endpoint */
|
|
#define ED_SKIP (1 << 14)
|
|
#define ED_SPEED_FULL (1 << 13) /* fullspeed device */
|
|
#define ED_INT (1 << 11) /* interrupt endpoint */
|
|
#define ED_EN_SHIFT 7 /* endpoint shift */
|
|
#define ED_EN_MASK ((1 << 4)-1) /* endpoint mask */
|
|
#define ED_EN_GET(x) (((x) >> ED_EN_SHIFT) & ED_EN_MASK)
|
|
#define ED_FA_MASK ((1 << 7)-1) /* function address mask */
|
|
#define ED_FA_GET(x) ((x) & ED_FA_MASK)
|
|
__hc32 hwTailP; /* tail of TD list */
|
|
__hc32 hwHeadP; /* head of TD list (hc r/w) */
|
|
#define ED_C (0x02) /* toggle carry */
|
|
#define ED_H (0x01) /* halted */
|
|
__hc32 hwNextED; /* next ED in list */
|
|
|
|
/* rest are purely for the driver's use */
|
|
dma_addr_t dma; /* addr of ED */
|
|
struct td *dummy; /* next TD to activate */
|
|
|
|
struct list_head urb_list; /* list of our URBs */
|
|
|
|
/* host's view of schedule */
|
|
struct ed *ed_next; /* on schedule list */
|
|
struct ed *ed_prev; /* for non-interrupt EDs */
|
|
struct ed *ed_rm_next; /* on rm list */
|
|
struct list_head td_list; /* "shadow list" of our TDs */
|
|
|
|
/* create --> IDLE --> OPER --> ... --> IDLE --> destroy
|
|
* usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
|
|
*/
|
|
u8 state; /* ED_{IDLE,UNLINK,OPER} */
|
|
#define ED_IDLE 0x00 /* NOT linked to HC */
|
|
#define ED_UNLINK 0x01 /* being unlinked from hc */
|
|
#define ED_OPER 0x02 /* IS linked to hc */
|
|
|
|
u8 type; /* PIPE_{BULK,...} */
|
|
|
|
/* periodic scheduling params (for intr and iso) */
|
|
u8 branch;
|
|
u16 interval;
|
|
u16 load;
|
|
u16 last_iso; /* iso only */
|
|
|
|
/* HC may see EDs on rm_list until next frame (frame_no == tick) */
|
|
u16 tick;
|
|
} __attribute__ ((aligned(ED_ALIGN)));
|
|
|
|
/*
|
|
* OHCI Transfer Descriptor (TD) ... one per transfer segment
|
|
* See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
|
|
* and 4.3.2 (iso)
|
|
*/
|
|
|
|
#define TD_ALIGN 32
|
|
#define TD_MASK ((u32)~(TD_ALIGN-1)) /* strip hw status in low addr bits */
|
|
|
|
struct td {
|
|
/* first fields are hardware-specified */
|
|
__hc32 hwINFO; /* transfer info bitmask */
|
|
|
|
/* hwINFO bits */
|
|
#define TD_OWN (1 << 31) /* owner of the descriptor */
|
|
#define TD_CC_SHIFT 27 /* condition code */
|
|
#define TD_CC_MASK 0xf
|
|
#define TD_CC (TD_CC_MASK << TD_CC_SHIFT)
|
|
#define TD_CC_GET(x) (((x) >> TD_CC_SHIFT) & TD_CC_MASK)
|
|
|
|
#define TD_EC_SHIFT 25 /* error count */
|
|
#define TD_EC_MASK 0x3
|
|
#define TD_EC (TD_EC_MASK << TD_EC_SHIFT)
|
|
#define TD_EC_GET(x) ((x >> TD_EC_SHIFT) & TD_EC_MASK)
|
|
#define TD_T_SHIFT 23 /* data toggle state */
|
|
#define TD_T_MASK 0x3
|
|
#define TD_T (TD_T_MASK << TD_T_SHIFT)
|
|
#define TD_T_DATA0 (0x2 << TD_T_SHIFT) /* DATA0 */
|
|
#define TD_T_DATA1 (0x3 << TD_T_SHIFT) /* DATA1 */
|
|
#define TD_T_CARRY (0x0 << TD_T_SHIFT) /* uses ED_C */
|
|
#define TD_T_GET(x) (((x) >> TD_T_SHIFT) & TD_T_MASK)
|
|
#define TD_DP_SHIFT 21 /* direction/pid */
|
|
#define TD_DP_MASK 0x3
|
|
#define TD_DP (TD_DP_MASK << TD_DP_SHIFT)
|
|
#define TD_DP_GET (((x) >> TD_DP_SHIFT) & TD_DP_MASK)
|
|
#define TD_DP_SETUP (0x0 << TD_DP_SHIFT) /* SETUP pid */
|
|
#define TD_DP_OUT (0x1 << TD_DP_SHIFT) /* OUT pid */
|
|
#define TD_DP_IN (0x2 << TD_DP_SHIFT) /* IN pid */
|
|
#define TD_ISI_SHIFT 8 /* Interrupt Service Interval */
|
|
#define TD_ISI_MASK 0x3f
|
|
#define TD_ISI_GET(x) (((x) >> TD_ISI_SHIFT) & TD_ISI_MASK)
|
|
#define TD_FN_MASK 0x3f /* frame number */
|
|
#define TD_FN_GET(x) ((x) & TD_FN_MASK)
|
|
|
|
__hc32 hwDBP; /* Data Buffer Pointer (or 0) */
|
|
__hc32 hwCBL; /* Controller/Buffer Length */
|
|
|
|
/* hwCBL bits */
|
|
#define TD_BL_MASK 0xffff /* buffer length */
|
|
#define TD_BL_GET(x) ((x) & TD_BL_MASK)
|
|
#define TD_IE (1 << 16) /* interrupt enable */
|
|
__hc32 hwNextTD; /* Next TD Pointer */
|
|
|
|
/* rest are purely for the driver's use */
|
|
__u8 index;
|
|
struct ed *ed;
|
|
struct td *td_hash; /* dma-->td hashtable */
|
|
struct td *next_dl_td;
|
|
struct urb *urb;
|
|
|
|
dma_addr_t td_dma; /* addr of this TD */
|
|
dma_addr_t data_dma; /* addr of data it points to */
|
|
|
|
struct list_head td_list; /* "shadow list", TDs on same ED */
|
|
|
|
u32 flags;
|
|
#define TD_FLAG_DONE (1 << 17) /* retired to done list */
|
|
#define TD_FLAG_ISO (1 << 16) /* copy of ED_ISO */
|
|
} __attribute__ ((aligned(TD_ALIGN))); /* c/b/i need 16; only iso needs 32 */
|
|
|
|
/*
|
|
* Hardware transfer status codes -- CC from td->hwINFO
|
|
*/
|
|
#define TD_CC_NOERROR 0x00
|
|
#define TD_CC_CRC 0x01
|
|
#define TD_CC_BITSTUFFING 0x02
|
|
#define TD_CC_DATATOGGLEM 0x03
|
|
#define TD_CC_STALL 0x04
|
|
#define TD_CC_DEVNOTRESP 0x05
|
|
#define TD_CC_PIDCHECKFAIL 0x06
|
|
#define TD_CC_UNEXPECTEDPID 0x07
|
|
#define TD_CC_DATAOVERRUN 0x08
|
|
#define TD_CC_DATAUNDERRUN 0x09
|
|
/* 0x0A, 0x0B reserved for hardware */
|
|
#define TD_CC_BUFFEROVERRUN 0x0C
|
|
#define TD_CC_BUFFERUNDERRUN 0x0D
|
|
/* 0x0E, 0x0F reserved for HCD */
|
|
#define TD_CC_HCD0 0x0E
|
|
#define TD_CC_NOTACCESSED 0x0F
|
|
|
|
/*
|
|
* preshifted status codes
|
|
*/
|
|
#define TD_SCC_NOTACCESSED (TD_CC_NOTACCESSED << TD_CC_SHIFT)
|
|
|
|
|
|
/* map OHCI TD status codes (CC) to errno values */
|
|
static const int cc_to_error [16] = {
|
|
/* No Error */ 0,
|
|
/* CRC Error */ -EILSEQ,
|
|
/* Bit Stuff */ -EPROTO,
|
|
/* Data Togg */ -EILSEQ,
|
|
/* Stall */ -EPIPE,
|
|
/* DevNotResp */ -ETIME,
|
|
/* PIDCheck */ -EPROTO,
|
|
/* UnExpPID */ -EPROTO,
|
|
/* DataOver */ -EOVERFLOW,
|
|
/* DataUnder */ -EREMOTEIO,
|
|
/* (for hw) */ -EIO,
|
|
/* (for hw) */ -EIO,
|
|
/* BufferOver */ -ECOMM,
|
|
/* BuffUnder */ -ENOSR,
|
|
/* (for HCD) */ -EALREADY,
|
|
/* (for HCD) */ -EALREADY
|
|
};
|
|
|
|
#define NUM_INTS 32
|
|
|
|
/*
|
|
* This is the structure of the OHCI controller's memory mapped I/O region.
|
|
* You must use readl() and writel() (in <asm/io.h>) to access these fields!!
|
|
* Layout is in section 7 (and appendix B) of the spec.
|
|
*/
|
|
struct admhcd_regs {
|
|
__hc32 gencontrol; /* General Control */
|
|
__hc32 int_status; /* Interrupt Status */
|
|
__hc32 int_enable; /* Interrupt Enable */
|
|
__hc32 reserved00;
|
|
__hc32 host_control; /* Host General Control */
|
|
__hc32 reserved01;
|
|
__hc32 fminterval; /* Frame Interval */
|
|
__hc32 fmnumber; /* Frame Number */
|
|
__hc32 reserved02;
|
|
__hc32 reserved03;
|
|
__hc32 reserved04;
|
|
__hc32 reserved05;
|
|
__hc32 reserved06;
|
|
__hc32 reserved07;
|
|
__hc32 reserved08;
|
|
__hc32 reserved09;
|
|
__hc32 reserved10;
|
|
__hc32 reserved11;
|
|
__hc32 reserved12;
|
|
__hc32 reserved13;
|
|
__hc32 reserved14;
|
|
__hc32 reserved15;
|
|
__hc32 reserved16;
|
|
__hc32 reserved17;
|
|
__hc32 reserved18;
|
|
__hc32 reserved19;
|
|
__hc32 reserved20;
|
|
__hc32 reserved21;
|
|
__hc32 lsthresh; /* Low Speed Threshold */
|
|
__hc32 rhdesc; /* Root Hub Descriptor */
|
|
#define MAX_ROOT_PORTS 2
|
|
__hc32 portstatus[MAX_ROOT_PORTS]; /* Port Status */
|
|
__hc32 hosthead; /* Host Descriptor Head */
|
|
} __attribute__ ((aligned(32)));
|
|
|
|
/*
|
|
* General Control register bits
|
|
*/
|
|
#define ADMHC_CTRL_UHFE (1 << 0) /* USB Host Function Enable */
|
|
#define ADMHC_CTRL_SIR (1 << 1) /* Software Interrupt request */
|
|
#define ADMHC_CTRL_DMAA (1 << 2) /* DMA Arbitration Control */
|
|
#define ADMHC_CTRL_SR (1 << 3) /* Software Reset */
|
|
|
|
/*
|
|
* Host General Control register bits
|
|
*/
|
|
#define ADMHC_HC_BUSS 0x3 /* USB bus state */
|
|
#define ADMHC_BUSS_RESET 0x0
|
|
#define ADMHC_BUSS_RESUME 0x1
|
|
#define ADMHC_BUSS_OPER 0x2
|
|
#define ADMHC_BUSS_SUSPEND 0x3
|
|
#define ADMHC_HC_DMAE (1 << 2) /* DMA enable */
|
|
|
|
/*
|
|
* Interrupt Status/Enable register bits
|
|
*/
|
|
#define ADMHC_INTR_SOFI (1 << 4) /* start of frame */
|
|
#define ADMHC_INTR_RESI (1 << 5) /* resume detected */
|
|
#define ADMHC_INTR_6 (1 << 6) /* unknown */
|
|
#define ADMHC_INTR_7 (1 << 7) /* unknown */
|
|
#define ADMHC_INTR_BABI (1 << 8) /* babble detected */
|
|
#define ADMHC_INTR_INSM (1 << 9) /* root hub status change */
|
|
#define ADMHC_INTR_SO (1 << 10) /* scheduling overrun */
|
|
#define ADMHC_INTR_FNO (1 << 11) /* frame number overflow */
|
|
#define ADMHC_INTR_TDC (1 << 20) /* transfer descriptor completed */
|
|
#define ADMHC_INTR_SWI (1 << 29) /* software interrupt */
|
|
#define ADMHC_INTR_FATI (1 << 30) /* fatal error */
|
|
#define ADMHC_INTR_INTA (1 << 31) /* interrupt active */
|
|
|
|
#define ADMHC_INTR_MIE (1 << 31) /* master interrupt enable */
|
|
|
|
/*
|
|
* SOF Frame Interval register bits
|
|
*/
|
|
#define ADMHC_SFI_FI_MASK ((1 << 14)-1) /* Frame Interval value */
|
|
#define ADMHC_SFI_FSLDP_SHIFT 16
|
|
#define ADMHC_SFI_FSLDP_MASK ((1 << 15)-1)
|
|
#define ADMHC_SFI_FIT (1 << 31) /* Frame Interval Toggle */
|
|
|
|
/*
|
|
* SOF Frame Number register bits
|
|
*/
|
|
#define ADMHC_SFN_FN_MASK ((1 << 16)-1) /* Frame Number Mask */
|
|
#define ADMHC_SFN_FR_SHIFT 16 /* Frame Remaining Shift */
|
|
#define ADMHC_SFN_FR_MASK ((1 << 14)-1) /* Frame Remaining Mask */
|
|
#define ADMHC_SFN_FRT (1 << 31) /* Frame Remaining Toggle */
|
|
|
|
/*
|
|
* Root Hub Descriptor register bits
|
|
*/
|
|
#define ADMHC_RH_NUMP 0xff /* number of ports */
|
|
#define ADMHC_RH_PSM (1 << 8) /* power switching mode */
|
|
#define ADMHC_RH_NPS (1 << 9) /* no power switching */
|
|
#define ADMHC_RH_OCPM (1 << 10) /* over current protection mode */
|
|
#define ADMHC_RH_NOCP (1 << 11) /* no over current protection */
|
|
#define ADMHC_RH_PPCM (0xff << 16) /* port power control */
|
|
|
|
#define ADMHC_RH_LPS (1 << 24) /* local power switch */
|
|
#define ADMHC_RH_OCI (1 << 25) /* over current indicator */
|
|
|
|
/* status change bits */
|
|
#define ADMHC_RH_LPSC (1 << 26) /* local power switch change */
|
|
#define ADMHC_RH_OCIC (1 << 27) /* over current indicator change */
|
|
|
|
#define ADMHC_RH_DRWE (1 << 28) /* device remote wakeup enable */
|
|
#define ADMHC_RH_CRWE (1 << 29) /* clear remote wakeup enable */
|
|
|
|
#define ADMHC_RH_CGP (1 << 24) /* clear global power */
|
|
#define ADMHC_RH_SGP (1 << 26) /* set global power */
|
|
|
|
/*
|
|
* Port Status register bits
|
|
*/
|
|
#define ADMHC_PS_CCS (1 << 0) /* current connect status */
|
|
#define ADMHC_PS_PES (1 << 1) /* port enable status */
|
|
#define ADMHC_PS_PSS (1 << 2) /* port suspend status */
|
|
#define ADMHC_PS_POCI (1 << 3) /* port over current indicator */
|
|
#define ADMHC_PS_PRS (1 << 4) /* port reset status */
|
|
#define ADMHC_PS_PPS (1 << 8) /* port power status */
|
|
#define ADMHC_PS_LSDA (1 << 9) /* low speed device attached */
|
|
|
|
/* status change bits */
|
|
#define ADMHC_PS_CSC (1 << 16) /* connect status change */
|
|
#define ADMHC_PS_PESC (1 << 17) /* port enable status change */
|
|
#define ADMHC_PS_PSSC (1 << 18) /* port suspend status change */
|
|
#define ADMHC_PS_OCIC (1 << 19) /* over current indicator change */
|
|
#define ADMHC_PS_PRSC (1 << 20) /* port reset status change */
|
|
|
|
/* port feature bits */
|
|
#define ADMHC_PS_CPE (1 << 0) /* clear port enable */
|
|
#define ADMHC_PS_SPE (1 << 1) /* set port enable */
|
|
#define ADMHC_PS_SPS (1 << 2) /* set port suspend */
|
|
#define ADMHC_PS_CPS (1 << 3) /* clear suspend status */
|
|
#define ADMHC_PS_SPR (1 << 4) /* set port reset */
|
|
#define ADMHC_PS_SPP (1 << 8) /* set port power */
|
|
#define ADMHC_PS_CPP (1 << 9) /* clear port power */
|
|
|
|
/*
|
|
* the POTPGT value is not defined in the ADMHC, so define a dummy value
|
|
*/
|
|
#define ADMHC_POTPGT 2 /* in ms */
|
|
|
|
/* hcd-private per-urb state */
|
|
struct urb_priv {
|
|
struct ed *ed;
|
|
struct list_head pending; /* URBs on the same ED */
|
|
|
|
u32 td_cnt; /* # tds in this request */
|
|
u32 td_idx; /* index of the current td */
|
|
struct td *td[0]; /* all TDs in this request */
|
|
};
|
|
|
|
#define TD_HASH_SIZE 64 /* power'o'two */
|
|
/* sizeof (struct td) ~= 64 == 2^6 ... */
|
|
#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
|
|
|
|
/*
|
|
* This is the full ADMHCD controller description
|
|
*
|
|
* Note how the "proper" USB information is just
|
|
* a subset of what the full implementation needs. (Linus)
|
|
*/
|
|
|
|
struct admhcd {
|
|
spinlock_t lock;
|
|
|
|
/*
|
|
* I/O memory used to communicate with the HC (dma-consistent)
|
|
*/
|
|
struct admhcd_regs __iomem *regs;
|
|
|
|
/*
|
|
* hcd adds to schedule for a live hc any time, but removals finish
|
|
* only at the start of the next frame.
|
|
*/
|
|
|
|
struct ed *ed_head;
|
|
struct ed *ed_tails[4];
|
|
|
|
struct ed *ed_rm_list; /* to be removed */
|
|
|
|
struct ed *periodic[NUM_INTS]; /* shadow int_table */
|
|
|
|
#if 0 /* TODO: remove? */
|
|
/*
|
|
* OTG controllers and transceivers need software interaction;
|
|
* other external transceivers should be software-transparent
|
|
*/
|
|
struct otg_transceiver *transceiver;
|
|
#endif
|
|
|
|
/*
|
|
* memory management for queue data structures
|
|
*/
|
|
struct dma_pool *td_cache;
|
|
struct dma_pool *ed_cache;
|
|
struct td *td_hash[TD_HASH_SIZE];
|
|
struct list_head pending;
|
|
|
|
/*
|
|
* driver state
|
|
*/
|
|
int num_ports;
|
|
int load[NUM_INTS];
|
|
u32 host_control; /* copy of the host_control reg */
|
|
unsigned long next_statechange; /* suspend/resume */
|
|
u32 fminterval; /* saved register */
|
|
unsigned autostop:1; /* rh auto stopping/stopped */
|
|
|
|
unsigned long flags; /* for HC bugs */
|
|
#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
|
|
#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
|
|
#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */
|
|
#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */
|
|
#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
|
|
#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
|
|
// there are also chip quirks/bugs in init logic
|
|
|
|
#ifdef DEBUG
|
|
struct dentry *debug_dir;
|
|
struct dentry *debug_async;
|
|
struct dentry *debug_periodic;
|
|
struct dentry *debug_registers;
|
|
#endif
|
|
};
|
|
|
|
/* convert between an hcd pointer and the corresponding ahcd_hcd */
|
|
static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
|
|
{
|
|
return (struct admhcd *)(hcd->hcd_priv);
|
|
}
|
|
static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd)
|
|
{
|
|
return container_of((void *)ahcd, struct usb_hcd, hcd_priv);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifndef DEBUG
|
|
#define STUB_DEBUG_FILES
|
|
#endif /* DEBUG */
|
|
|
|
#ifdef DEBUG
|
|
# define admhc_dbg(ahcd, fmt, args...) \
|
|
printk(KERN_DEBUG "adm5120-hcd: " fmt , ## args )
|
|
#else
|
|
# define admhc_dbg(ahcd, fmt, args...) do { } while (0)
|
|
#endif
|
|
|
|
#define admhc_err(ahcd, fmt, args...) \
|
|
printk(KERN_ERR "adm5120-hcd: " fmt , ## args )
|
|
#define admhc_info(ahcd, fmt, args...) \
|
|
printk(KERN_INFO "adm5120-hcd: " fmt , ## args )
|
|
#define admhc_warn(ahcd, fmt, args...) \
|
|
printk(KERN_WARNING "adm5120-hcd: " fmt , ## args )
|
|
|
|
#ifdef ADMHC_VERBOSE_DEBUG
|
|
# define admhc_vdbg admhc_dbg
|
|
#else
|
|
# define admhc_vdbg(ahcd, fmt, args...) do { } while (0)
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* While most USB host controllers implement their registers and
|
|
* in-memory communication descriptors in little-endian format,
|
|
* a minority (notably the IBM STB04XXX and the Motorola MPC5200
|
|
* processors) implement them in big endian format.
|
|
*
|
|
* In addition some more exotic implementations like the Toshiba
|
|
* Spider (aka SCC) cell southbridge are "mixed" endian, that is,
|
|
* they have a different endianness for registers vs. in-memory
|
|
* descriptors.
|
|
*
|
|
* This attempts to support either format at compile time without a
|
|
* runtime penalty, or both formats with the additional overhead
|
|
* of checking a flag bit.
|
|
*
|
|
* That leads to some tricky Kconfig rules howevber. There are
|
|
* different defaults based on some arch/ppc platforms, though
|
|
* the basic rules are:
|
|
*
|
|
* Controller type Kconfig options needed
|
|
* --------------- ----------------------
|
|
* little endian CONFIG_USB_ADMHC_LITTLE_ENDIAN
|
|
*
|
|
* fully big endian CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_
|
|
* CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
|
|
*
|
|
* mixed endian CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_
|
|
* CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
|
|
*
|
|
* (If you have a mixed endian controller, you -must- also define
|
|
* CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building
|
|
* both your mixed endian and a fully big endian controller support in
|
|
* the same kernel image).
|
|
*/
|
|
|
|
#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC
|
|
#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
|
|
#define big_endian_desc(ahcd) (ahcd->flags & OHCI_QUIRK_BE_DESC)
|
|
#else
|
|
#define big_endian_desc(ahcd) 1 /* only big endian */
|
|
#endif
|
|
#else
|
|
#define big_endian_desc(ahcd) 0 /* only little endian */
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
|
|
#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
|
|
#define big_endian_mmio(ahcd) (ahcd->flags & OHCI_QUIRK_BE_MMIO)
|
|
#else
|
|
#define big_endian_mmio(ahcd) 1 /* only big endian */
|
|
#endif
|
|
#else
|
|
#define big_endian_mmio(ahcd) 0 /* only little endian */
|
|
#endif
|
|
|
|
/*
|
|
* Big-endian read/write functions are arch-specific.
|
|
* Other arches can be added if/when they're needed.
|
|
*
|
|
* REVISIT: arch/powerpc now has readl/writel_be, so the
|
|
* definition below can die once the STB04xxx support is
|
|
* finally ported over.
|
|
*/
|
|
#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
|
|
#define readl_be(addr) in_be32((__force unsigned *)addr)
|
|
#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
|
|
#endif
|
|
|
|
static inline unsigned int admhc_readl(const struct admhcd *ahcd,
|
|
__hc32 __iomem *regs)
|
|
{
|
|
#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
|
|
return big_endian_mmio(ahcd) ?
|
|
readl_be(regs) :
|
|
readl(regs);
|
|
#else
|
|
return readl(regs);
|
|
#endif
|
|
}
|
|
|
|
static inline void admhc_writel(const struct admhcd *ahcd,
|
|
const unsigned int val, __hc32 __iomem *regs)
|
|
{
|
|
#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
|
|
big_endian_mmio(ahcd) ?
|
|
writel_be(val, regs) :
|
|
writel(val, regs);
|
|
#else
|
|
writel(val, regs);
|
|
#endif
|
|
}
|
|
|
|
static inline void admhc_writel_flush(const struct admhcd *ahcd)
|
|
{
|
|
#if 0
|
|
/* TODO: remove? */
|
|
(void) admhc_readl(ahcd, &ahcd->regs->gencontrol);
|
|
#endif
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* cpu to ahcd */
|
|
static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x)
|
|
{
|
|
return big_endian_desc(ahcd) ?
|
|
(__force __hc16)cpu_to_be16(x) :
|
|
(__force __hc16)cpu_to_le16(x);
|
|
}
|
|
|
|
static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x)
|
|
{
|
|
return big_endian_desc(ahcd) ?
|
|
cpu_to_be16p(x) :
|
|
cpu_to_le16p(x);
|
|
}
|
|
|
|
static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x)
|
|
{
|
|
return big_endian_desc(ahcd) ?
|
|
(__force __hc32)cpu_to_be32(x) :
|
|
(__force __hc32)cpu_to_le32(x);
|
|
}
|
|
|
|
static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x)
|
|
{
|
|
return big_endian_desc(ahcd) ?
|
|
cpu_to_be32p(x) :
|
|
cpu_to_le32p(x);
|
|
}
|
|
|
|
/* ahcd to cpu */
|
|
static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x)
|
|
{
|
|
return big_endian_desc(ahcd) ?
|
|
be16_to_cpu((__force __be16)x) :
|
|
le16_to_cpu((__force __le16)x);
|
|
}
|
|
|
|
static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x)
|
|
{
|
|
return big_endian_desc(ahcd) ?
|
|
be16_to_cpup((__force __be16 *)x) :
|
|
le16_to_cpup((__force __le16 *)x);
|
|
}
|
|
|
|
static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x)
|
|
{
|
|
return big_endian_desc(ahcd) ?
|
|
be32_to_cpu((__force __be32)x) :
|
|
le32_to_cpu((__force __le32)x);
|
|
}
|
|
|
|
static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x)
|
|
{
|
|
return big_endian_desc(ahcd) ?
|
|
be32_to_cpup((__force __be32 *)x) :
|
|
le32_to_cpup((__force __le32 *)x);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline u16 admhc_frame_no(const struct admhcd *ahcd)
|
|
{
|
|
u32 t;
|
|
|
|
t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK;
|
|
return (u16)t;
|
|
}
|
|
|
|
static inline u16 admhc_frame_remain(const struct admhcd *ahcd)
|
|
{
|
|
u32 t;
|
|
|
|
t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT;
|
|
t &= ADMHC_SFN_FR_MASK;
|
|
return (u16)t;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline void admhc_disable(struct admhcd *ahcd)
|
|
{
|
|
admhcd_to_hcd(ahcd)->state = HC_STATE_HALT;
|
|
}
|
|
|
|
#define FI 0x2edf /* 12000 bits per frame (-1) */
|
|
#define FSLDP(fi) (0x7fff & ((6 * ((fi) - 1200)) / 7))
|
|
#define FIT ADMHC_SFI_FIT
|
|
#define LSTHRESH 0x628 /* lowspeed bit threshold */
|
|
|
|
static inline void periodic_reinit(struct admhcd *ahcd)
|
|
{
|
|
#if 0
|
|
u32 fi = ahcd->fminterval & ADMHC_SFI_FI_MASK;
|
|
u32 fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
|
|
|
|
/* TODO: adjust FSLargestDataPacket value too? */
|
|
admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
|
|
&ahcd->regs->fminterval);
|
|
#else
|
|
u32 fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
|
|
|
|
/* TODO: adjust FSLargestDataPacket value too? */
|
|
admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
|
|
&ahcd->regs->fminterval);
|
|
#endif
|
|
}
|
|
|
|
static inline u32 admhc_read_rhdesc(struct admhcd *ahcd)
|
|
{
|
|
return admhc_readl(ahcd, &ahcd->regs->rhdesc);
|
|
}
|
|
|
|
static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port)
|
|
{
|
|
return admhc_readl(ahcd, &ahcd->regs->portstatus[port]);
|
|
}
|
|
|
|
static inline void admhc_write_portstatus(struct admhcd *ahcd, int port,
|
|
u32 value)
|
|
{
|
|
admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]);
|
|
}
|
|
|
|
static inline void roothub_write_status(struct admhcd *ahcd, u32 value)
|
|
{
|
|
/* FIXME: read-only bits must be masked out */
|
|
admhc_writel(ahcd, value, &ahcd->regs->rhdesc);
|
|
}
|
|
|
|
static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints)
|
|
{
|
|
u32 t;
|
|
|
|
t = admhc_readl(ahcd, &ahcd->regs->int_enable);
|
|
t &= ~(ints);
|
|
admhc_writel(ahcd, t, &ahcd->regs->int_enable);
|
|
/* TODO: flush writes ?*/
|
|
}
|
|
|
|
static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints)
|
|
{
|
|
u32 t;
|
|
|
|
t = admhc_readl(ahcd, &ahcd->regs->int_enable);
|
|
t |= ints;
|
|
admhc_writel(ahcd, t, &ahcd->regs->int_enable);
|
|
/* TODO: flush writes ?*/
|
|
}
|
|
|
|
static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints)
|
|
{
|
|
admhc_writel(ahcd, ints, &ahcd->regs->int_status);
|
|
}
|
|
|
|
static inline void admhc_dma_enable(struct admhcd *ahcd)
|
|
{
|
|
u32 t;
|
|
|
|
t = admhc_readl(ahcd, &ahcd->regs->host_control);
|
|
if (t & ADMHC_HC_DMAE)
|
|
return;
|
|
|
|
t |= ADMHC_HC_DMAE;
|
|
admhc_writel(ahcd, t, &ahcd->regs->host_control);
|
|
admhc_vdbg(ahcd,"DMA enabled\n");
|
|
}
|
|
|
|
static inline void admhc_dma_disable(struct admhcd *ahcd)
|
|
{
|
|
u32 t;
|
|
|
|
t = admhc_readl(ahcd, &ahcd->regs->host_control);
|
|
if (!(t & ADMHC_HC_DMAE))
|
|
return;
|
|
|
|
t &= ~ADMHC_HC_DMAE;
|
|
admhc_writel(ahcd, t, &ahcd->regs->host_control);
|
|
admhc_vdbg(ahcd,"DMA disabled\n");
|
|
}
|