openwrt-owl/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-su...

40 lines
1.4 KiB
Diff

--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -403,6 +403,16 @@ config ATH79_MACH_RW2458N
select ATH79_DEV_M25P80
select ATH79_DEV_USB
+config ATH79_MACH_CAP4200AG
+ bool "Senao CAP4200AG support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_EAP7660D
bool "Senao EAP7660D support"
select SOC_AR71XX
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -29,6 +29,7 @@ enum ath79_mach_type {
ATH79_MACH_AP83, /* Atheros AP83 */
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_ATH79_MACH_AP81) += mach-a
obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o