openwrt-owl/target/linux/danube/patches/110-drivers.patch

94 lines
3.5 KiB
Diff

Index: linux-2.6.23/drivers/serial/Kconfig
===================================================================
--- linux-2.6.23.orig/drivers/serial/Kconfig 2007-12-13 20:41:42.000000000 +0100
+++ linux-2.6.23/drivers/serial/Kconfig 2007-12-13 20:41:57.000000000 +0100
@@ -1259,4 +1259,10 @@
Currently, only 8250 compatible ports are supported, but
others can easily be added.
+config SERIAL_DANUBE
+ bool "Danube serial driver"
+ depends on DANUBE
+ help
+ Driver for the danubes built in ASC hardware
+
endmenu
Index: linux-2.6.23/drivers/serial/Makefile
===================================================================
--- linux-2.6.23.orig/drivers/serial/Makefile 2007-12-13 20:41:42.000000000 +0100
+++ linux-2.6.23/drivers/serial/Makefile 2007-12-13 20:41:57.000000000 +0100
@@ -64,3 +64,4 @@
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+obj-$(CONFIG_SERIAL_DANUBE) += danube_asc.o
Index: linux-2.6.23/drivers/mtd/maps/Makefile
===================================================================
--- linux-2.6.23.orig/drivers/mtd/maps/Makefile 2007-12-13 20:41:42.000000000 +0100
+++ linux-2.6.23/drivers/mtd/maps/Makefile 2007-12-13 20:41:57.000000000 +0100
@@ -71,3 +71,4 @@
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
+obj-$(CONFIG_MTD_DANUBE) += danube.o
Index: linux-2.6.23/drivers/net/Kconfig
===================================================================
--- linux-2.6.23.orig/drivers/net/Kconfig 2007-12-13 20:41:42.000000000 +0100
+++ linux-2.6.23/drivers/net/Kconfig 2007-12-13 20:41:57.000000000 +0100
@@ -339,6 +339,18 @@
source "drivers/net/arm/Kconfig"
+config DANUBE_MII0
+ tristate "Infineon Danube eth0 driver"
+ depends on DANUBE
+ help
+ Support for the MII0 inside the Danube SOC
+
+config DANUBE_MII1
+ tristate "Infineon Danube eth1 driver"
+ depends on DANUBE
+ help
+ Support for the MII1 inside the Danube SOC
+
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
depends on ARM || MIPS
Index: linux-2.6.23/drivers/net/Makefile
===================================================================
--- linux-2.6.23.orig/drivers/net/Makefile 2007-12-13 20:41:42.000000000 +0100
+++ linux-2.6.23/drivers/net/Makefile 2007-12-13 20:41:57.000000000 +0100
@@ -208,6 +208,7 @@
obj-$(CONFIG_FEC_8XX) += fec_8xx/
obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
+obj-$(CONFIG_DANUBE_MII0) += danube_mii0.o
obj-$(CONFIG_MACB) += macb.o
Index: linux-2.6.23/drivers/char/watchdog/Makefile
===================================================================
--- linux-2.6.23.orig/drivers/char/watchdog/Makefile 2007-12-13 20:41:42.000000000 +0100
+++ linux-2.6.23/drivers/char/watchdog/Makefile 2007-12-13 20:41:57.000000000 +0100
@@ -90,6 +90,7 @@
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+obj-$(CONFIG_DANUBE_WDT) += danube_wdt.o
# PARISC Architecture
Index: linux-2.6.23/drivers/char/Makefile
===================================================================
--- linux-2.6.23.orig/drivers/char/Makefile 2007-12-13 20:41:42.000000000 +0100
+++ linux-2.6.23/drivers/char/Makefile 2007-12-14 22:41:07.000000000 +0100
@@ -135,3 +135,8 @@
rm $@.tmp
endif
+
+obj-$(CONFIG_DANUBE_LED) += danube_led.o
+obj-$(CONFIG_DANUBE_GPIO) += danube_gpio.o
+obj-$(CONFIG_DANUBE_SSC) += danube_ssc.o
+obj-$(CONFIG_DANUBE_EEPROM) += danube_eeprom.o