openwrt-owl/target/linux/brcm47xx/patches-3.10/770-bgmac-phylib.patch

209 lines
5.5 KiB
Diff

--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -133,6 +133,7 @@ config BNX2X_SRIOV
config BGMAC
tristate "BCMA bus GBit core support"
depends on BCMA_HOST_SOC && HAS_DMA
+ select PHYLIB
---help---
This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
They can be found on BCM47xx SoCs and provide gigabit ethernet.
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -1201,27 +1201,14 @@ static int bgmac_set_mac_address(struct
static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
{
struct bgmac *bgmac = netdev_priv(net_dev);
- struct mii_ioctl_data *data = if_mii(ifr);
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = bgmac->phyaddr;
- /* fallthru */
- case SIOCGMIIREG:
- if (!netif_running(net_dev))
- return -EAGAIN;
- data->val_out = bgmac_phy_read(bgmac, data->phy_id,
- data->reg_num & 0x1f);
- return 0;
- case SIOCSMIIREG:
- if (!netif_running(net_dev))
- return -EAGAIN;
- bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f,
- data->val_in);
- return 0;
- default:
- return -EOPNOTSUPP;
- }
+ if (!netif_running(net_dev))
+ return -EINVAL;
+
+ if (!bgmac->phydev)
+ return -EINVAL;
+
+ return phy_mii_ioctl(bgmac->phydev, ifr, cmd);
}
static const struct net_device_ops bgmac_netdev_ops = {
@@ -1243,61 +1230,18 @@ static int bgmac_get_settings(struct net
{
struct bgmac *bgmac = netdev_priv(net_dev);
- cmd->supported = SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg;
-
- if (bgmac->autoneg) {
- WARN_ON(cmd->advertising);
- if (bgmac->full_duplex) {
- if (bgmac->speed & BGMAC_SPEED_10)
- cmd->advertising |= ADVERTISED_10baseT_Full;
- if (bgmac->speed & BGMAC_SPEED_100)
- cmd->advertising |= ADVERTISED_100baseT_Full;
- if (bgmac->speed & BGMAC_SPEED_1000)
- cmd->advertising |= ADVERTISED_1000baseT_Full;
- } else {
- if (bgmac->speed & BGMAC_SPEED_10)
- cmd->advertising |= ADVERTISED_10baseT_Half;
- if (bgmac->speed & BGMAC_SPEED_100)
- cmd->advertising |= ADVERTISED_100baseT_Half;
- if (bgmac->speed & BGMAC_SPEED_1000)
- cmd->advertising |= ADVERTISED_1000baseT_Half;
- }
- } else {
- switch (bgmac->speed) {
- case BGMAC_SPEED_10:
- ethtool_cmd_speed_set(cmd, SPEED_10);
- break;
- case BGMAC_SPEED_100:
- ethtool_cmd_speed_set(cmd, SPEED_100);
- break;
- case BGMAC_SPEED_1000:
- ethtool_cmd_speed_set(cmd, SPEED_1000);
- break;
- }
- }
-
- cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-
- cmd->autoneg = bgmac->autoneg;
-
- return 0;
+ return phy_ethtool_gset(bgmac->phydev, cmd);
}
-#if 0
+
static int bgmac_set_settings(struct net_device *net_dev,
struct ethtool_cmd *cmd)
{
struct bgmac *bgmac = netdev_priv(net_dev);
- return -1;
+ return phy_ethtool_sset(bgmac->phydev, cmd);
}
-#endif
+
static void bgmac_get_drvinfo(struct net_device *net_dev,
struct ethtool_drvinfo *info)
@@ -1308,6 +1252,7 @@ static void bgmac_get_drvinfo(struct net
static const struct ethtool_ops bgmac_ethtool_ops = {
.get_settings = bgmac_get_settings,
+ .set_settings = bgmac_set_settings,
.get_drvinfo = bgmac_get_drvinfo,
};
@@ -1326,10 +1271,42 @@ static int bgmac_mii_write(struct mii_bu
return bgmac_phy_write(bus->priv, mii_id, regnum, value);
}
+static void bgmac_adjust_link(struct net_device *dev)
+{
+ struct bgmac *bgmac = netdev_priv(dev);
+ struct phy_device *phydev = bgmac->phydev;
+ int status_changed = 0;
+
+ BUG_ON(!phydev);
+
+ if (bgmac->old_link != phydev->link) {
+ status_changed = 1;
+ bgmac->old_link = phydev->link;
+ }
+
+ /* reflect duplex change */
+ if (phydev->link && (bgmac->old_duplex != phydev->duplex)) {
+ status_changed = 1;
+ bgmac->old_duplex = phydev->duplex;
+ }
+
+ if (status_changed) {
+ pr_info("%s: link %s", dev->name, phydev->link ?
+ "UP" : "DOWN");
+ if (phydev->link)
+ pr_cont(" - %d/%s", phydev->speed,
+ phydev->duplex == DUPLEX_FULL ? "full" : "half");
+ pr_cont("\n");
+ }
+}
+
static int bgmac_mii_register(struct bgmac *bgmac)
{
struct mii_bus *mii_bus;
int i, err = 0;
+ struct phy_device *phydev = NULL;
+ char phy_id[MII_BUS_ID_SIZE + 3];
+ struct net_device *net_dev = bgmac->net_dev;
mii_bus = mdiobus_alloc();
if (!mii_bus)
@@ -1360,7 +1337,29 @@ static int bgmac_mii_register(struct bgm
bgmac->mii_bus = mii_bus;
- return err;
+ /* connect to PHY */
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+ mii_bus->id, bgmac->phyaddr);
+
+ phydev = phy_connect(net_dev, phy_id, &bgmac_adjust_link,
+ PHY_INTERFACE_MODE_MII);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(net_dev, "could not attach PHY: %s", phy_id);
+ bgmac->phyaddr = BGMAC_PHY_NOREGS;
+ return PTR_ERR(phydev);
+ }
+
+ bgmac->phydev = phydev;
+ bgmac->old_link = 0;
+ bgmac->old_duplex = -1;
+ bgmac->phyaddr = phydev->addr;
+
+ netdev_info(net_dev, "attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s)\n",
+ phydev->drv->name, dev_name(&phydev->dev));
+
+ return 0;
err_free_irq:
kfree(mii_bus->irq);
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -399,7 +399,10 @@ struct bgmac {
struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */
struct net_device *net_dev;
struct napi_struct napi;
+ struct phy_device *phydev;
struct mii_bus *mii_bus;
+ int old_link;
+ int old_duplex;
/* DMA */
struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];