openwrt-owl/target/linux/bcm53xx/patches-4.1/032-PCI-iproc-Delete-unnece...

80 lines
2.1 KiB
Diff

From 93972d18bbaba6f34e21742400b6e7461edc4837 Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sun, 28 Jun 2015 16:42:04 +0200
Subject: [PATCH] PCI: iproc: Delete unnecessary checks before phy calls
The functions phy_exit() and phy_power_off() test whether their argument is
NULL and then return immediately. Thus the test around the calls is not
needed.
This issue was detected by using the Coccinelle software.
[bhelgaas: also phy_init() and phy_power_on(), as Ray Jui suggested]
[bhelgaas: also remove tests in iproc_pcie_remove()]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
---
drivers/pci/host/pcie-iproc.c | 34 +++++++++++++---------------------
1 file changed, 13 insertions(+), 21 deletions(-)
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -191,19 +191,16 @@ int iproc_pcie_setup(struct iproc_pcie *
if (!pcie || !pcie->dev || !pcie->base)
return -EINVAL;
- if (pcie->phy) {
- ret = phy_init(pcie->phy);
- if (ret) {
- dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
- return ret;
- }
-
- ret = phy_power_on(pcie->phy);
- if (ret) {
- dev_err(pcie->dev, "unable to power on PCIe PHY\n");
- goto err_exit_phy;
- }
+ ret = phy_init(pcie->phy);
+ if (ret) {
+ dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
+ return ret;
+ }
+ ret = phy_power_on(pcie->phy);
+ if (ret) {
+ dev_err(pcie->dev, "unable to power on PCIe PHY\n");
+ goto err_exit_phy;
}
iproc_pcie_reset(pcie);
@@ -239,12 +236,9 @@ err_rm_root_bus:
pci_remove_root_bus(bus);
err_power_off_phy:
- if (pcie->phy)
- phy_power_off(pcie->phy);
+ phy_power_off(pcie->phy);
err_exit_phy:
- if (pcie->phy)
- phy_exit(pcie->phy);
-
+ phy_exit(pcie->phy);
return ret;
}
EXPORT_SYMBOL(iproc_pcie_setup);
@@ -254,10 +248,8 @@ int iproc_pcie_remove(struct iproc_pcie
pci_stop_root_bus(pcie->root_bus);
pci_remove_root_bus(pcie->root_bus);
- if (pcie->phy) {
- phy_power_off(pcie->phy);
- phy_exit(pcie->phy);
- }
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
return 0;
}