hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt-owl/target/linux/ar7/patches-3.3/160-vlynq_try_remote_first....

301 lines
8.3 KiB
Diff
Raw Blame History

--- a/drivers/vlynq/vlynq.c
+++ b/drivers/vlynq/vlynq.c
@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev
return 0;
}
+static volatile int vlynq_delay_value_new = 0;
+
+static void vlynq_delay_wait(u32 count)
+{
+ /* Code adopted from original vlynq driver */
+ int i = 0;
+ volatile int *ptr = &vlynq_delay_value_new;
+ *ptr = 0;
+
+ /* We are assuming that the each cycle takes about
+ * 23 assembly instructions. */
+ for(i = 0; i < (count + 23)/23; i++)
+ *ptr = *ptr + 1;
+}
+
static void vlynq_reset(struct vlynq_device *dev)
{
+ u32 rtm = readl(&dev->local->revision);
+
+ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ?
+ 0 : 0x600000;
+
writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
&dev->local->control);
/* Wait for the devices to finish resetting */
- msleep(5);
+ vlynq_delay_wait(0xffffff);
/* Remove reset bit */
- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm,
&dev->local->control);
/* Give some time for the devices to settle */
- msleep(5);
+ vlynq_delay_wait(0xffffff);
}
static void vlynq_irq_unmask(struct irq_data *d)
@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn
}
EXPORT_SYMBOL(vlynq_unregister_driver);
+enum vlynq_clk_src {
+ vlynq_clk_external,
+ vlynq_clk_local,
+ vlynq_clk_remote,
+ vlynq_clk_invalid,
+};
+
+static int __vlynq_set_clocks(struct vlynq_device *dev,
+ enum vlynq_clk_src clk_dir,
+ int lclk_div, int rclk_div)
+{
+ u32 reg;
+
+ if (clk_dir == vlynq_clk_invalid) {
+ printk(KERN_ERR "%s: attempt to set invalid clocking\n",
+ dev_name(&dev->dev));
+ return -EINVAL;
+ }
+
+ reg = readl(&dev->local->control);
+ if (readl(&dev->local->revision) < 0x00010205) {
+ if (clk_dir & vlynq_clk_local)
+ reg |= VLYNQ_CTRL_CLOCK_INT;
+ else
+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
+ }
+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
+ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div);
+ writel(reg, &dev->local->control);
+
+ if (!vlynq_linked(dev))
+ return -ENODEV;
+
+ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n",
+ dev_name(&dev->dev), readl(&dev->local->revision));
+ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n",
+ dev_name(&dev->dev), readl(&dev->remote->revision));
+
+ reg = readl(&dev->remote->control);
+ if (readl(&dev->remote->revision) < 0x00010205) {
+ if (clk_dir & vlynq_clk_remote)
+ reg |= VLYNQ_CTRL_CLOCK_INT;
+ else
+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
+ }
+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
+ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div);
+ writel(reg, &dev->remote->control);
+
+ if (!vlynq_linked(dev))
+ return -ENODEV;
+
+ return 0;
+}
+
/*
* A VLYNQ remote device can clock the VLYNQ bus master
* using a dedicated clock line. In that case, both the
@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly
int i;
vlynq_reset(dev);
- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
- i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
- dev->dev_id ? i++ : i--) {
+ for (i = 0; i <= 7; i++) {
if (!vlynq_linked(dev))
break;
- writel((readl(&dev->remote->control) &
- ~VLYNQ_CTRL_CLOCK_MASK) |
- VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
- &dev->remote->control);
- writel((readl(&dev->local->control)
- & ~(VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_MASK)) |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
- &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using remote clock divisor %d\n",
- dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
- dev->divisor = i;
+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) {
+ printk(KERN_INFO
+ "%s: using remote clock divisor %d\n",
+ dev_name(&dev->dev), i + 1);
+ dev->divisor = i + vlynq_rdiv1;
return 0;
} else {
vlynq_reset(dev);
@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly
*/
static int __vlynq_try_local(struct vlynq_device *dev)
{
- int i;
+ int i, dir = !dev->dev_id;
vlynq_reset(dev);
- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
- i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
- dev->dev_id ? i++ : i--) {
-
- writel((readl(&dev->local->control) &
- ~VLYNQ_CTRL_CLOCK_MASK) |
- VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
- &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using local clock divisor %d\n",
- dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
- dev->divisor = i;
+ for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) {
+
+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) {
+ printk(KERN_INFO
+ "%s: using local clock divisor %d\n",
+ dev_name(&dev->dev), i + 1);
+ dev->divisor = i + vlynq_ldiv1;
return 0;
} else {
vlynq_reset(dev);
@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v
if (!vlynq_linked(dev))
return -ENODEV;
- writel((readl(&dev->remote->control) &
- ~VLYNQ_CTRL_CLOCK_INT),
- &dev->remote->control);
-
- writel((readl(&dev->local->control) &
- ~VLYNQ_CTRL_CLOCK_INT),
- &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG "%s: using external clock\n",
- dev_name(&dev->dev));
- dev->divisor = vlynq_div_external;
+ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) {
+ printk(KERN_INFO "%s: using external clock\n",
+ dev_name(&dev->dev));
+ dev->divisor = vlynq_div_external;
return 0;
}
@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct
return result;
switch (dev->divisor) {
- case vlynq_div_external:
case vlynq_div_auto:
/* When the device is brought from reset it should have clock
* generation negotiated by hardware.
* Check which device is generating clocks and perform setup
* accordingly */
- if (vlynq_linked(dev) && readl(&dev->remote->control) &
- VLYNQ_CTRL_CLOCK_INT) {
- if (!__vlynq_try_remote(dev) ||
- !__vlynq_try_local(dev) ||
- !__vlynq_try_external(dev))
- return 0;
- } else {
- if (!__vlynq_try_external(dev) ||
- !__vlynq_try_local(dev) ||
- !__vlynq_try_remote(dev))
- return 0;
- }
+ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev))
+ return 0;
+ case vlynq_div_external:
+ if (!__vlynq_try_external(dev))
+ return 0;
break;
case vlynq_ldiv1:
case vlynq_ldiv2:
@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct
case vlynq_ldiv6:
case vlynq_ldiv7:
case vlynq_ldiv8:
- writel(VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
- vlynq_ldiv1), &dev->local->control);
- writel(0, &dev->remote->control);
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using local clock divisor %d\n",
- dev_name(&dev->dev),
- dev->divisor - vlynq_ldiv1 + 1);
+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor -
+ vlynq_ldiv1, 0)) {
+ printk(KERN_INFO
+ "%s: using local clock divisor %d\n",
+ dev_name(&dev->dev),
+ dev->divisor - vlynq_ldiv1 + 1);
return 0;
}
break;
@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct
case vlynq_rdiv6:
case vlynq_rdiv7:
case vlynq_rdiv8:
- writel(0, &dev->local->control);
- writel(VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
- vlynq_rdiv1), &dev->remote->control);
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using remote clock divisor %d\n",
- dev_name(&dev->dev),
- dev->divisor - vlynq_rdiv1 + 1);
+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0,
+ dev->divisor - vlynq_rdiv1)) {
+ printk(KERN_INFO
+ "%s: using remote clock divisor %d\n",
+ dev_name(&dev->dev),
+ dev->divisor - vlynq_rdiv1 + 1);
return 0;
}
break;
}
-
+ vlynq_reset(dev);
ops->off(dev);
return -ENODEV;
}
@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d
platform_set_drvdata(pdev, dev);
printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
- (void *)dev->mem_start);
+ dev_name(&dev->dev), (void *)dev->regs_start,
+ dev->irq, (void *)dev->mem_start);
dev->dev_id = 0;
dev->divisor = vlynq_div_auto;
- result = __vlynq_enable_device(dev);
- if (result == 0) {
+ if (!__vlynq_enable_device(dev)) {
dev->dev_id = readl(&dev->remote->chip);
+ vlynq_reset(dev);
((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
}
if (dev->dev_id)
Reference in New Issue View Git Blame Copy Permalink