Go to file
Jonas Gorski a164be8ebe build: add a build step for generic sysupgrade nand image
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46784
2015-09-04 14:44:27 +00:00
config enable strong SSP / Stackprotector on gcc5 2015-08-18 09:20:34 +00:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include build: add a build step for generic sysupgrade nand image 2015-09-04 14:44:27 +00:00
package odhcp6c: correctly extend prefix from RAs 2015-09-04 06:29:36 +00:00
scripts build: add a build step for generic sysupgrade nand image 2015-09-04 14:44:27 +00:00
target ipq806x: enable ubiblock support 2015-09-04 14:44:04 +00:00
toolchain gcc: add ARM codegen fix from PR 65932 2015-09-03 13:14:44 +00:00
tools tools/firmware-utils: add header version 2 support for mktplinkfw 2015-08-17 06:23:43 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
LICENSE
Makefile Makefile: move the cleaning of staging_dir/target* from dirclean to clean 2015-06-14 17:47:16 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
rules.mk rules.mk: remove GCC 4.4 and GCC 4.5 conditional 2015-08-25 07:45:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org