mirror of https://github.com/hak5/openwrt-owl.git
922 lines
24 KiB
Diff
922 lines
24 KiB
Diff
From 8984e3fc6db029479d6aa78882b39235379aebff Mon Sep 17 00:00:00 2001
|
|
From: Andy Gross <agross@codeaurora.org>
|
|
Date: Wed, 14 May 2014 13:45:07 -0500
|
|
Subject: [PATCH 177/182] dmaengine: Add QCOM ADM DMA driver
|
|
|
|
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
|
|
controller found in the MSM8960 and IPQ/APQ8064 platforms.
|
|
|
|
The ADM supports both memory to memory transactions and memory
|
|
to/from peripheral device transactions. The controller also provides flow
|
|
control capabilities for transactions to/from peripheral devices.
|
|
|
|
The initial release of this driver supports slave transfers to/from peripherals
|
|
and also incorporates CRCI (client rate control interface) flow control.
|
|
|
|
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
|
---
|
|
drivers/dma/Kconfig | 10 +
|
|
drivers/dma/Makefile | 1 +
|
|
drivers/dma/qcom_adm.c | 871 ++++++++++++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 882 insertions(+)
|
|
create mode 100644 drivers/dma/qcom_adm.c
|
|
|
|
--- a/drivers/dma/Kconfig
|
|
+++ b/drivers/dma/Kconfig
|
|
@@ -410,4 +410,14 @@ config QCOM_BAM_DMA
|
|
Enable support for the QCOM BAM DMA controller. This controller
|
|
provides DMA capabilities for a variety of on-chip devices.
|
|
|
|
+config QCOM_ADM
|
|
+ tristate "Qualcomm ADM support"
|
|
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
|
|
+ select DMA_ENGINE
|
|
+ select DMA_VIRTUAL_CHANNELS
|
|
+ ---help---
|
|
+ Enable support for the Qualcomm ADM DMA controller. This controller
|
|
+ provides DMA capabilities for both general purpose and on-chip
|
|
+ peripheral devices.
|
|
+
|
|
endif
|
|
--- a/drivers/dma/Makefile
|
|
+++ b/drivers/dma/Makefile
|
|
@@ -46,3 +46,4 @@ obj-$(CONFIG_K3_DMA) += k3dma.o
|
|
obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
|
|
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
|
|
obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
|
|
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
|
|
--- /dev/null
|
|
+++ b/drivers/dma/qcom_adm.c
|
|
@@ -0,0 +1,871 @@
|
|
+/*
|
|
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 and
|
|
+ * only version 2 as published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/scatterlist.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/of_address.h>
|
|
+#include <linux/of_irq.h>
|
|
+#include <linux/of_dma.h>
|
|
+#include <linux/reset.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/dmaengine.h>
|
|
+
|
|
+#include "dmaengine.h"
|
|
+#include "virt-dma.h"
|
|
+
|
|
+/* ADM registers - calculated from channel number and security domain */
|
|
+#define HI_CH_CMD_PTR(chan, ee) (4*chan + 0x20800*ee)
|
|
+#define HI_CH_RSLT(chan, ee) (0x40 + 4*chan + 0x20800*ee)
|
|
+#define HI_CH_FLUSH_STATE0(chan, ee) (0x80 + 4*chan + 0x20800*ee)
|
|
+#define HI_CH_FLUSH_STATE1(chan, ee) (0xc0 + 4*chan + 0x20800*ee)
|
|
+#define HI_CH_FLUSH_STATE2(chan, ee) (0x100 + 4*chan + 0x20800*ee)
|
|
+#define HI_CH_FLUSH_STATE3(chan, ee) (0x140 + 4*chan + 0x20800*ee)
|
|
+#define HI_CH_FLUSH_STATE4(chan, ee) (0x180 + 4*chan + 0x20800*ee)
|
|
+#define HI_CH_FLUSH_STATE5(chan, ee) (0x1c0 + 4*chan + 0x20800*ee)
|
|
+#define HI_CH_STATUS_SD(chan, ee) (0x200 + 4*chan + 0x20800*ee)
|
|
+#define HI_CH_CONF(chan) (0x240 + 4*chan)
|
|
+#define HI_CH_RSLT_CONF(chan, ee) (0x300 + 4*chan + 0x20800*ee)
|
|
+#define HI_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + 0x20800*ee)
|
|
+#define HI_CI_CONF(ci) (0x390 + 4*ci)
|
|
+#define HI_CRCI_CONF0 0x3d0
|
|
+#define HI_CRCI_CONF1 0x3d4
|
|
+#define HI_GP_CTL 0x3d8
|
|
+#define HI_CRCI_CTL(chan, ee) (0x400 + 0x4*chan + 0x20800*ee)
|
|
+
|
|
+/* channel status */
|
|
+#define CH_STATUS_VALID BIT(1)
|
|
+
|
|
+/* channel result */
|
|
+#define CH_RSLT_VALID BIT(31)
|
|
+#define CH_RSLT_ERR BIT(3)
|
|
+#define CH_RSLT_FLUSH BIT(2)
|
|
+#define CH_RSLT_TPD BIT(1)
|
|
+
|
|
+/* channel conf */
|
|
+#define CH_CONF_MPU_DISABLE BIT(11)
|
|
+#define CH_CONF_PERM_MPU_CONF BIT(9)
|
|
+#define CH_CONF_FLUSH_RSLT_EN BIT(8)
|
|
+#define CH_CONF_FORCE_RSLT_EN BIT(7)
|
|
+#define CH_CONF_IRQ_EN BIT(6)
|
|
+
|
|
+/* channel result conf */
|
|
+#define CH_RSLT_CONF_FLUSH_EN BIT(1)
|
|
+#define CH_RSLT_CONF_IRQ_EN BIT(0)
|
|
+
|
|
+/* CRCI CTL */
|
|
+#define CRCI_CTL_RST BIT(17)
|
|
+
|
|
+/* CI configuration */
|
|
+#define CI_RANGE_END(x) (x << 24)
|
|
+#define CI_RANGE_START(x) (x << 16)
|
|
+#define CI_BURST_4_WORDS 0x4
|
|
+#define CI_BURST_8_WORDS 0x8
|
|
+
|
|
+/* GP CTL */
|
|
+#define GP_CTL_LP_EN BIT(12)
|
|
+#define GP_CTL_LP_CNT(x) (x << 8)
|
|
+
|
|
+/* Command pointer list entry */
|
|
+#define CPLE_LP BIT(31)
|
|
+
|
|
+/* Command list entry */
|
|
+#define CMD_LC BIT(31)
|
|
+#define CMD_DST_CRCI(n) (((n) & 0xf) << 7)
|
|
+#define CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
|
|
+
|
|
+#define CMD_TYPE_SINGLE 0x0
|
|
+#define CMD_TYPE_BOX 0x3
|
|
+
|
|
+#define ADM_DESC_ALIGN 8
|
|
+#define ADM_MAX_XFER (SZ_64K-1)
|
|
+#define ADM_MAX_ROWS (SZ_64K-1)
|
|
+
|
|
+/* Command Pointer List Entry */
|
|
+#define CMD_LP BIT(31)
|
|
+#define CMD_PT_MASK (0x3 << 29)
|
|
+#define CMD_ADDR_MASK 0x3fffffff
|
|
+
|
|
+struct adm_desc_hw {
|
|
+ u32 cmd;
|
|
+ u32 src_addr;
|
|
+ u32 dst_addr;
|
|
+ u32 row_len;
|
|
+ u32 num_rows;
|
|
+ u32 row_offset;
|
|
+};
|
|
+
|
|
+struct adm_cmd_ptr_list {
|
|
+ u32 cple; /* command ptr list entry */
|
|
+ struct adm_desc_hw desc[0];
|
|
+};
|
|
+
|
|
+struct adm_async_desc {
|
|
+ struct virt_dma_desc vd;
|
|
+ struct adm_device *adev;
|
|
+
|
|
+ size_t length;
|
|
+ enum dma_transfer_direction dir;
|
|
+ dma_addr_t dma_addr;
|
|
+ size_t dma_len;
|
|
+
|
|
+ struct adm_cmd_ptr_list *cpl;
|
|
+ u32 num_desc;
|
|
+};
|
|
+
|
|
+struct adm_chan {
|
|
+ struct virt_dma_chan vc;
|
|
+ struct adm_device *adev;
|
|
+
|
|
+ /* parsed from DT */
|
|
+ u32 id; /* channel id */
|
|
+ u32 crci; /* CRCI to be used for transfers */
|
|
+ u32 blk_size; /* block size for CRCI, default 16 byte */
|
|
+
|
|
+ struct adm_async_desc *curr_txd;
|
|
+ struct dma_slave_config slave;
|
|
+ struct list_head node;
|
|
+
|
|
+ int error;
|
|
+ int initialized;
|
|
+};
|
|
+
|
|
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
|
|
+{
|
|
+ return container_of(common, struct adm_chan, vc.chan);
|
|
+}
|
|
+
|
|
+struct adm_device {
|
|
+ void __iomem *regs;
|
|
+ struct device *dev;
|
|
+ struct dma_device common;
|
|
+ struct device_dma_parameters dma_parms;
|
|
+ struct adm_chan *channels;
|
|
+ u32 num_channels;
|
|
+
|
|
+ u32 ee;
|
|
+
|
|
+ struct clk *core_clk;
|
|
+ struct clk *iface_clk;
|
|
+
|
|
+ struct reset_control *clk_reset;
|
|
+ struct reset_control *c0_reset;
|
|
+ struct reset_control *c1_reset;
|
|
+ struct reset_control *c2_reset;
|
|
+ int irq;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * adm_alloc_chan - Allocates channel resources for DMA channel
|
|
+ *
|
|
+ * This function is effectively a stub, as we don't need to setup any resources
|
|
+ */
|
|
+static int adm_alloc_chan(struct dma_chan *chan)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_free_chan - Frees dma resources associated with the specific channel
|
|
+ *
|
|
+ * Free all allocated descriptors associated with this channel
|
|
+ *
|
|
+ */
|
|
+static void adm_free_chan(struct dma_chan *chan)
|
|
+{
|
|
+ /* free all queued descriptors */
|
|
+ vchan_free_chan_resources(to_virt_chan(chan));
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_prep_slave_sg - Prep slave sg transaction
|
|
+ *
|
|
+ * @chan: dma channel
|
|
+ * @sgl: scatter gather list
|
|
+ * @sg_len: length of sg
|
|
+ * @direction: DMA transfer direction
|
|
+ * @flags: DMA flags
|
|
+ * @context: transfer context (unused)
|
|
+ */
|
|
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
|
|
+ struct scatterlist *sgl, unsigned int sg_len,
|
|
+ enum dma_transfer_direction direction, unsigned long flags,
|
|
+ void *context)
|
|
+{
|
|
+ struct adm_chan *achan = to_adm_chan(chan);
|
|
+ struct adm_device *adev = achan->adev;
|
|
+ struct adm_async_desc *async_desc;
|
|
+ struct scatterlist *sg;
|
|
+ u32 i, rows, num_desc = 0, idx = 0, desc_offset;
|
|
+ struct adm_desc_hw *desc;
|
|
+ struct adm_cmd_ptr_list *cpl;
|
|
+ u32 burst = ADM_MAX_XFER;
|
|
+
|
|
+
|
|
+ if (!is_slave_direction(direction)) {
|
|
+ dev_err(adev->dev, "invalid dma direction\n");
|
|
+ return NULL;
|
|
+ }
|
|
+
|
|
+ /* if using CRCI flow control, validate burst settings */
|
|
+ if (achan->slave.device_fc) {
|
|
+ burst = (direction == DMA_MEM_TO_DEV) ?
|
|
+ achan->slave.dst_maxburst :
|
|
+ achan->slave.src_maxburst;
|
|
+
|
|
+ if (!burst) {
|
|
+ dev_err(adev->dev, "invalid burst value w/ crci: %d\n",
|
|
+ burst);
|
|
+ return ERR_PTR(-EINVAL);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* iterate through sgs and compute allocation size of structures */
|
|
+ for_each_sg(sgl, sg, sg_len, i) {
|
|
+
|
|
+ /* calculate boxes using burst */
|
|
+ rows = DIV_ROUND_UP(sg_dma_len(sg), burst);
|
|
+ num_desc += DIV_ROUND_UP(rows, ADM_MAX_ROWS);
|
|
+
|
|
+ /* flow control requires length as a multiple of burst */
|
|
+ if (achan->slave.device_fc && (sg_dma_len(sg) % burst)) {
|
|
+ dev_err(adev->dev, "length is not multiple of burst\n");
|
|
+ return ERR_PTR(-EINVAL);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
|
|
+ if (!async_desc)
|
|
+ return ERR_PTR(-ENOMEM);
|
|
+
|
|
+ async_desc->dma_len = num_desc * sizeof(*desc) + sizeof(*cpl) +
|
|
+ ADM_DESC_ALIGN;
|
|
+ async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,
|
|
+ &async_desc->dma_addr, GFP_NOWAIT);
|
|
+
|
|
+ if (!async_desc->cpl) {
|
|
+ kfree(async_desc);
|
|
+ return ERR_PTR(-ENOMEM);
|
|
+ }
|
|
+
|
|
+ async_desc->num_desc = num_desc;
|
|
+ async_desc->adev = adev;
|
|
+ cpl = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
|
|
+ desc = PTR_ALIGN(&cpl->desc[0], ADM_DESC_ALIGN);
|
|
+ desc_offset = (u32)desc - (u32)async_desc->cpl;
|
|
+
|
|
+ /* init cmd list */
|
|
+ cpl->cple |= CPLE_LP;
|
|
+ cpl->cple |= (async_desc->dma_addr + desc_offset) >> 3;
|
|
+
|
|
+ for_each_sg(sgl, sg, sg_len, i) {
|
|
+ unsigned int remainder = sg_dma_len(sg);
|
|
+ unsigned int curr_offset = 0;
|
|
+ unsigned int row_len;
|
|
+
|
|
+ do {
|
|
+ desc[idx].cmd = CMD_TYPE_BOX;
|
|
+ desc[idx].row_offset = 0;
|
|
+
|
|
+ if (direction == DMA_DEV_TO_MEM) {
|
|
+ desc[idx].dst_addr = sg_dma_address(sg) +
|
|
+ curr_offset;
|
|
+ desc[idx].src_addr = achan->slave.src_addr;
|
|
+ desc[idx].cmd |= CMD_SRC_CRCI(achan->crci);
|
|
+ desc[idx].row_offset = burst;
|
|
+ } else {
|
|
+ desc[idx].src_addr = sg_dma_address(sg) +
|
|
+ curr_offset;
|
|
+ desc[idx].dst_addr = achan->slave.dst_addr;
|
|
+ desc[idx].cmd |= CMD_DST_CRCI(achan->crci);
|
|
+ desc[idx].row_offset = burst << 16;
|
|
+ }
|
|
+
|
|
+ if (remainder < burst) {
|
|
+ rows = 1;
|
|
+ row_len = remainder;
|
|
+ } else {
|
|
+ rows = remainder / burst;
|
|
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
|
|
+ row_len = burst;
|
|
+ }
|
|
+
|
|
+ desc[idx].num_rows = rows << 16 | rows;
|
|
+ desc[idx].row_len = row_len << 16 | row_len;
|
|
+
|
|
+ remainder -= row_len * rows;
|
|
+ async_desc->length += row_len * rows;
|
|
+ curr_offset += row_len * rows;
|
|
+
|
|
+ idx++;
|
|
+ } while (remainder > 0);
|
|
+ }
|
|
+
|
|
+ /* set last command flag */
|
|
+ desc[idx - 1].cmd |= CMD_LC;
|
|
+
|
|
+ /* reset channel error */
|
|
+ achan->error = 0;
|
|
+
|
|
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_slave_config - set slave configuration for channel
|
|
+ * @chan: dma channel
|
|
+ * @cfg: slave configuration
|
|
+ *
|
|
+ * Sets slave configuration for channel
|
|
+ *
|
|
+ */
|
|
+static int adm_slave_config(struct adm_chan *achan,
|
|
+ struct dma_slave_config *cfg)
|
|
+{
|
|
+ int ret = 0;
|
|
+ u32 burst;
|
|
+ struct adm_device *adev = achan->adev;
|
|
+
|
|
+ memcpy(&achan->slave, cfg, sizeof(*cfg));
|
|
+
|
|
+ /* set channel CRCI burst, if applicable */
|
|
+ if (achan->crci) {
|
|
+ burst = max_t(u32, cfg->src_maxburst, cfg->dst_maxburst);
|
|
+
|
|
+ switch (burst) {
|
|
+ case 16:
|
|
+ achan->blk_size = 0;
|
|
+ break;
|
|
+ case 32:
|
|
+ achan->blk_size = 1;
|
|
+ break;
|
|
+ case 64:
|
|
+ achan->blk_size = 2;
|
|
+ break;
|
|
+ case 128:
|
|
+ achan->blk_size = 3;
|
|
+ break;
|
|
+ case 192:
|
|
+ achan->blk_size = 4;
|
|
+ break;
|
|
+ case 256:
|
|
+ achan->blk_size = 5;
|
|
+ break;
|
|
+ default:
|
|
+ achan->slave.src_maxburst = 0;
|
|
+ achan->slave.dst_maxburst = 0;
|
|
+ ret = -EINVAL;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if (!ret)
|
|
+ writel(achan->blk_size,
|
|
+ adev->regs + HI_CRCI_CTL(achan->id, adev->ee));
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_terminate_all - terminate all transactions on a channel
|
|
+ * @achan: adm dma channel
|
|
+ *
|
|
+ * Dequeues and frees all transactions, aborts current transaction
|
|
+ * No callbacks are done
|
|
+ *
|
|
+ */
|
|
+static void adm_terminate_all(struct adm_chan *achan)
|
|
+{
|
|
+ struct adm_device *adev = achan->adev;
|
|
+ unsigned long flags;
|
|
+ LIST_HEAD(head);
|
|
+
|
|
+ /* send flush command to terminate current transaction */
|
|
+ writel_relaxed(0x0,
|
|
+ adev->regs + HI_CH_FLUSH_STATE0(achan->id, adev->ee));
|
|
+
|
|
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
|
+ vchan_get_all_descriptors(&achan->vc, &head);
|
|
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
|
+
|
|
+ vchan_dma_desc_free_list(&achan->vc, &head);
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_control - DMA device control
|
|
+ * @chan: dma channel
|
|
+ * @cmd: control cmd
|
|
+ * @arg: cmd argument
|
|
+ *
|
|
+ * Perform DMA control command
|
|
+ *
|
|
+ */
|
|
+static int adm_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
|
|
+ unsigned long arg)
|
|
+{
|
|
+ struct adm_chan *achan = to_adm_chan(chan);
|
|
+ unsigned long flag;
|
|
+ int ret = 0;
|
|
+
|
|
+ switch (cmd) {
|
|
+ case DMA_SLAVE_CONFIG:
|
|
+ spin_lock_irqsave(&achan->vc.lock, flag);
|
|
+ ret = adm_slave_config(achan, (struct dma_slave_config *)arg);
|
|
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
|
|
+ break;
|
|
+
|
|
+ case DMA_TERMINATE_ALL:
|
|
+ adm_terminate_all(achan);
|
|
+ break;
|
|
+
|
|
+ default:
|
|
+ ret = -ENXIO;
|
|
+ break;
|
|
+ };
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_start_dma - start next transaction
|
|
+ * @achan - ADM dma channel
|
|
+ */
|
|
+static void adm_start_dma(struct adm_chan *achan)
|
|
+{
|
|
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
|
|
+ struct adm_device *adev = achan->adev;
|
|
+ struct adm_async_desc *async_desc;
|
|
+ struct adm_desc_hw *desc;
|
|
+ struct adm_cmd_ptr_list *cpl;
|
|
+
|
|
+ lockdep_assert_held(&achan->vc.lock);
|
|
+
|
|
+ if (!vd)
|
|
+ return;
|
|
+
|
|
+ list_del(&vd->node);
|
|
+
|
|
+ /* write next command list out to the CMD FIFO */
|
|
+ async_desc = container_of(vd, struct adm_async_desc, vd);
|
|
+ achan->curr_txd = async_desc;
|
|
+
|
|
+ cpl = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
|
|
+ desc = PTR_ALIGN(&cpl->desc[0], ADM_DESC_ALIGN);
|
|
+
|
|
+ if (!achan->initialized) {
|
|
+ /* enable interrupts */
|
|
+ writel(CH_CONF_IRQ_EN | CH_CONF_FLUSH_RSLT_EN |
|
|
+ CH_CONF_FORCE_RSLT_EN | CH_CONF_PERM_MPU_CONF |
|
|
+ CH_CONF_MPU_DISABLE,
|
|
+ adev->regs + HI_CH_CONF(achan->id));
|
|
+
|
|
+ writel(CH_RSLT_CONF_IRQ_EN | CH_RSLT_CONF_FLUSH_EN,
|
|
+ adev->regs + HI_CH_RSLT_CONF(achan->id, adev->ee));
|
|
+
|
|
+ if (achan->crci)
|
|
+ writel(achan->blk_size, adev->regs +
|
|
+ HI_CRCI_CTL(achan->crci, adev->ee));
|
|
+
|
|
+ achan->initialized = 1;
|
|
+ }
|
|
+
|
|
+ /* make sure IRQ enable doesn't get reordered */
|
|
+ wmb();
|
|
+
|
|
+ /* write next command list out to the CMD FIFO */
|
|
+ writel(round_up(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
|
|
+ adev->regs + HI_CH_CMD_PTR(achan->id, adev->ee));
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_dma_irq - irq handler for ADM controller
|
|
+ * @irq: IRQ of interrupt
|
|
+ * @data: callback data
|
|
+ *
|
|
+ * IRQ handler for the bam controller
|
|
+ */
|
|
+static irqreturn_t adm_dma_irq(int irq, void *data)
|
|
+{
|
|
+ struct adm_device *adev = data;
|
|
+ u32 srcs, i;
|
|
+ struct adm_async_desc *async_desc;
|
|
+ unsigned long flags;
|
|
+
|
|
+ srcs = readl_relaxed(adev->regs +
|
|
+ HI_SEC_DOMAIN_IRQ_STATUS(adev->ee));
|
|
+
|
|
+ for (i = 0; i < 16; i++) {
|
|
+ struct adm_chan *achan = &adev->channels[i];
|
|
+ u32 status, result;
|
|
+ if (srcs & BIT(i)) {
|
|
+ status = readl_relaxed(adev->regs +
|
|
+ HI_CH_STATUS_SD(i, adev->ee));
|
|
+
|
|
+ /* if no result present, skip */
|
|
+ if (!(status & CH_STATUS_VALID))
|
|
+ continue;
|
|
+
|
|
+ result = readl_relaxed(adev->regs +
|
|
+ HI_CH_RSLT(i, adev->ee));
|
|
+
|
|
+ /* no valid results, skip */
|
|
+ if (!(result & CH_RSLT_VALID))
|
|
+ continue;
|
|
+
|
|
+ /* flag error if transaction was flushed or failed */
|
|
+ if (result & (CH_RSLT_ERR | CH_RSLT_FLUSH))
|
|
+ achan->error = 1;
|
|
+
|
|
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
|
+ async_desc = achan->curr_txd;
|
|
+
|
|
+ achan->curr_txd = NULL;
|
|
+
|
|
+ if (async_desc) {
|
|
+ vchan_cookie_complete(&async_desc->vd);
|
|
+
|
|
+ /* kick off next DMA */
|
|
+ adm_start_dma(achan);
|
|
+ }
|
|
+
|
|
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_tx_status - returns status of transaction
|
|
+ * @chan: dma channel
|
|
+ * @cookie: transaction cookie
|
|
+ * @txstate: DMA transaction state
|
|
+ *
|
|
+ * Return status of dma transaction
|
|
+ */
|
|
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
|
|
+ struct dma_tx_state *txstate)
|
|
+{
|
|
+ struct adm_chan *achan = to_adm_chan(chan);
|
|
+ struct virt_dma_desc *vd;
|
|
+ enum dma_status ret;
|
|
+ unsigned long flags;
|
|
+ size_t residue = 0;
|
|
+
|
|
+ ret = dma_cookie_status(chan, cookie, txstate);
|
|
+
|
|
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
|
+
|
|
+ vd = vchan_find_desc(&achan->vc, cookie);
|
|
+ if (vd)
|
|
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
|
|
+ else if (achan->curr_txd && achan->curr_txd->vd.tx.cookie == cookie)
|
|
+ residue = achan->curr_txd->length;
|
|
+
|
|
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
|
+
|
|
+ dma_set_residue(txstate, residue);
|
|
+
|
|
+ if (achan->error)
|
|
+ return DMA_ERROR;
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static struct dma_chan *adm_dma_xlate(struct of_phandle_args *dma_spec,
|
|
+ struct of_dma *of)
|
|
+{
|
|
+ struct adm_device *adev = container_of(of->of_dma_data,
|
|
+ struct adm_device, common);
|
|
+ struct adm_chan *achan;
|
|
+ struct dma_chan *chan;
|
|
+ unsigned int request;
|
|
+ unsigned int crci;
|
|
+
|
|
+ if (dma_spec->args_count != 2) {
|
|
+ dev_err(adev->dev, "incorrect number of dma arguments\n");
|
|
+ return NULL;
|
|
+ }
|
|
+
|
|
+ request = dma_spec->args[0];
|
|
+ if (request >= adev->num_channels)
|
|
+ return NULL;
|
|
+
|
|
+ crci = dma_spec->args[1];
|
|
+
|
|
+ chan = dma_get_slave_channel(&(adev->channels[request].vc.chan));
|
|
+
|
|
+ if (!chan)
|
|
+ return NULL;
|
|
+
|
|
+ achan = to_adm_chan(chan);
|
|
+ achan->crci = crci;
|
|
+
|
|
+ return chan;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_issue_pending - starts pending transactions
|
|
+ * @chan: dma channel
|
|
+ *
|
|
+ * Issues all pending transactions and starts DMA
|
|
+ */
|
|
+static void adm_issue_pending(struct dma_chan *chan)
|
|
+{
|
|
+ struct adm_chan *achan = to_adm_chan(chan);
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
|
+
|
|
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
|
|
+ adm_start_dma(achan);
|
|
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
|
+}
|
|
+
|
|
+/**
|
|
+ * adm_dma_free_desc - free descriptor memory
|
|
+ * @vd: virtual descriptor
|
|
+ *
|
|
+ */
|
|
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
|
|
+{
|
|
+ struct adm_async_desc *async_desc = container_of(vd,
|
|
+ struct adm_async_desc, vd);
|
|
+
|
|
+ dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,
|
|
+ async_desc->cpl, async_desc->dma_addr);
|
|
+ kfree(async_desc);
|
|
+}
|
|
+
|
|
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
|
|
+ u32 index)
|
|
+{
|
|
+ achan->id = index;
|
|
+ achan->adev = adev;
|
|
+
|
|
+ vchan_init(&achan->vc, &adev->common);
|
|
+ achan->vc.desc_free = adm_dma_free_desc;
|
|
+}
|
|
+
|
|
+static int adm_dma_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct adm_device *adev;
|
|
+ struct resource *iores;
|
|
+ int ret;
|
|
+ u32 i;
|
|
+
|
|
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
|
|
+ if (!adev)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ adev->dev = &pdev->dev;
|
|
+
|
|
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
|
|
+ if (IS_ERR(adev->regs))
|
|
+ return PTR_ERR(adev->regs);
|
|
+
|
|
+ adev->irq = platform_get_irq(pdev, 0);
|
|
+ if (adev->irq < 0)
|
|
+ return adev->irq;
|
|
+
|
|
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
|
|
+ if (ret) {
|
|
+ dev_err(adev->dev, "Execution environment unspecified\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ adev->core_clk = devm_clk_get(adev->dev, "core");
|
|
+ if (IS_ERR(adev->core_clk))
|
|
+ return PTR_ERR(adev->core_clk);
|
|
+
|
|
+ ret = clk_prepare_enable(adev->core_clk);
|
|
+ if (ret) {
|
|
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
|
|
+ if (IS_ERR(adev->iface_clk))
|
|
+ return PTR_ERR(adev->iface_clk);
|
|
+
|
|
+ ret = clk_prepare_enable(adev->iface_clk);
|
|
+ if (ret) {
|
|
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
|
|
+ if (IS_ERR(adev->clk_reset)) {
|
|
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
|
|
+ return PTR_ERR(adev->clk_reset);
|
|
+ }
|
|
+
|
|
+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
|
|
+ if (IS_ERR(adev->c0_reset)) {
|
|
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
|
|
+ return PTR_ERR(adev->c0_reset);
|
|
+ }
|
|
+
|
|
+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
|
|
+ if (IS_ERR(adev->c1_reset)) {
|
|
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
|
|
+ return PTR_ERR(adev->c1_reset);
|
|
+ }
|
|
+
|
|
+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
|
|
+ if (IS_ERR(adev->c2_reset)) {
|
|
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
|
|
+ return PTR_ERR(adev->c2_reset);
|
|
+ }
|
|
+
|
|
+ reset_control_assert(adev->clk_reset);
|
|
+ reset_control_assert(adev->c0_reset);
|
|
+ reset_control_assert(adev->c1_reset);
|
|
+ reset_control_assert(adev->c2_reset);
|
|
+
|
|
+ reset_control_deassert(adev->clk_reset);
|
|
+ reset_control_deassert(adev->c0_reset);
|
|
+ reset_control_deassert(adev->c1_reset);
|
|
+ reset_control_deassert(adev->c2_reset);
|
|
+
|
|
+ adev->num_channels = 16;
|
|
+
|
|
+ adev->channels = devm_kcalloc(adev->dev, adev->num_channels,
|
|
+ sizeof(*adev->channels), GFP_KERNEL);
|
|
+
|
|
+ if (!adev->channels) {
|
|
+ ret = -ENOMEM;
|
|
+ goto err_disable_clk;
|
|
+ }
|
|
+
|
|
+ /* allocate and initialize channels */
|
|
+ INIT_LIST_HEAD(&adev->common.channels);
|
|
+
|
|
+ for (i = 0; i < adev->num_channels; i++)
|
|
+ adm_channel_init(adev, &adev->channels[i], i);
|
|
+
|
|
+ /* reset CRCIs */
|
|
+ for (i = 0; i < 16; i++)
|
|
+ writel(CRCI_CTL_RST, adev->regs + HI_CRCI_CTL(i, adev->ee));
|
|
+
|
|
+ /* configure client interfaces */
|
|
+ writel(CI_RANGE_START(0x40) | CI_RANGE_END(0xb0) | CI_BURST_8_WORDS,
|
|
+ adev->regs + HI_CI_CONF(0));
|
|
+ writel(CI_RANGE_START(0x2a) | CI_RANGE_END(0x2c) | CI_BURST_8_WORDS,
|
|
+ adev->regs + HI_CI_CONF(1));
|
|
+ writel(CI_RANGE_START(0x12) | CI_RANGE_END(0x28) | CI_BURST_8_WORDS,
|
|
+ adev->regs + HI_CI_CONF(2));
|
|
+ writel(GP_CTL_LP_EN | GP_CTL_LP_CNT(0xf), adev->regs + HI_GP_CTL);
|
|
+
|
|
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
|
|
+ 0, "adm_dma", adev);
|
|
+ if (ret)
|
|
+ goto err_disable_clk;
|
|
+
|
|
+ platform_set_drvdata(pdev, adev);
|
|
+
|
|
+ adev->common.dev = adev->dev;
|
|
+ adev->common.dev->dma_parms = &adev->dma_parms;
|
|
+
|
|
+ /* set capabilities */
|
|
+ dma_cap_zero(adev->common.cap_mask);
|
|
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
|
|
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
|
|
+
|
|
+ /* initialize dmaengine apis */
|
|
+ adev->common.device_alloc_chan_resources = adm_alloc_chan;
|
|
+ adev->common.device_free_chan_resources = adm_free_chan;
|
|
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
|
|
+ adev->common.device_control = adm_control;
|
|
+ adev->common.device_issue_pending = adm_issue_pending;
|
|
+ adev->common.device_tx_status = adm_tx_status;
|
|
+
|
|
+ ret = dma_async_device_register(&adev->common);
|
|
+ if (ret) {
|
|
+ dev_err(adev->dev, "failed to register dma async device\n");
|
|
+ goto err_disable_clk;
|
|
+ }
|
|
+
|
|
+ ret = of_dma_controller_register(pdev->dev.of_node, adm_dma_xlate,
|
|
+ &adev->common);
|
|
+ if (ret)
|
|
+ goto err_unregister_dma;
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_unregister_dma:
|
|
+ dma_async_device_unregister(&adev->common);
|
|
+err_disable_clk:
|
|
+ clk_disable_unprepare(adev->core_clk);
|
|
+ clk_disable_unprepare(adev->iface_clk);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int adm_dma_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct adm_device *adev = platform_get_drvdata(pdev);
|
|
+ struct adm_chan *achan;
|
|
+ u32 i;
|
|
+
|
|
+ of_dma_controller_free(pdev->dev.of_node);
|
|
+ dma_async_device_unregister(&adev->common);
|
|
+
|
|
+ devm_free_irq(adev->dev, adev->irq, adev);
|
|
+
|
|
+ for (i = 0; i < adev->num_channels; i++) {
|
|
+ achan = &adev->channels[i];
|
|
+ writel(CH_CONF_FLUSH_RSLT_EN,
|
|
+ adev->regs + HI_CH_CONF(achan->id));
|
|
+ writel(CH_RSLT_CONF_FLUSH_EN,
|
|
+ adev->regs + HI_CH_RSLT_CONF(achan->id, adev->ee));
|
|
+
|
|
+ adm_terminate_all(&adev->channels[i]);
|
|
+ }
|
|
+
|
|
+ clk_disable_unprepare(adev->core_clk);
|
|
+ clk_disable_unprepare(adev->iface_clk);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct of_device_id adm_of_match[] = {
|
|
+ { .compatible = "qcom,adm", },
|
|
+ {}
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, adm_of_match);
|
|
+
|
|
+static struct platform_driver adm_dma_driver = {
|
|
+ .probe = adm_dma_probe,
|
|
+ .remove = adm_dma_remove,
|
|
+ .driver = {
|
|
+ .name = "adm-dma-engine",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = adm_of_match,
|
|
+ },
|
|
+};
|
|
+
|
|
+module_platform_driver(adm_dma_driver);
|
|
+
|
|
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
|
|
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
|
|
+MODULE_LICENSE("GPL v2");
|