openwrt-owl

Go to file

Jo-Philipp Wich 9f4d70e9a3 nvram: refuse nvram operations on the WGT634U SVN-Revision: 16378		2009-06-08 11:59:41 +00:00
docs	a couple of small fixes in the Wireless documentation	2009-05-22 13:45:22 +00:00
include	More libtool madness: Every package which was using c++ and libtool fixup was linked against libstd++ even though if it should have been linked against uclibc++. This is fixed by providing a special version of libtool fixup for packages which should use uclibc++. Not pretty but functional. Packages linking against uclibc++ should use PKG_FIXUP:=libtool-ucxx instead of PKG_FIXUP:=libtool	2009-06-04 00:20:01 +00:00
package	nvram: refuse nvram operations on the WGT634U	2009-06-08 11:59:41 +00:00
scripts	missing changes for pcie handling	2009-06-02 09:54:45 +00:00
target	refresh 2.6.28 patches	2009-06-08 11:31:17 +00:00
toolchain	disable tls for stdlibc++. fixes c++ inside a gcc-4.4.0 toolchain.	2009-06-05 11:33:12 +00:00
tools	build firmware image for the MZK-W300NH board	2009-06-04 19:14:46 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target	2009-03-18 15:57:18 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	feeds.conf.default: Change openwrt feeds urls from https to svn	2009-04-01 18:29:19 +00:00
rules.mk	Set TARGET_CXX to 'no' if c++ is not enabled in the toolchain.	2009-05-30 15:48:44 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org