openwrt-owl

Go to file

John Crispin 9b595fcd4b ppp: allow to set PPP interface name via config allows to set PPP interface name manually via new network interface option pppname. If not set, default naming will be used (e.g. pppoe-eth0) Signed-off-by: Ulrich Weber <uw@ocedo.com> SVN-Revision: 40933		2014-06-02 12:44:36 +00:00
config	image: ext4: rename config options as these are only used for ext4 image creation	2014-06-02 12:44:10 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	image: ext4: rename config options as these are only used for ext4 image creation	2014-06-02 12:44:10 +00:00
package	ppp: allow to set PPP interface name via config	2014-06-02 12:44:36 +00:00
scripts	metadata.pl: suppress profile config.in code for targets that have subtargets (fixes #14480 )	2014-06-01 15:18:47 +00:00
target	ralink: add seama image can be upgrade by sysupgrade	2014-06-02 12:43:49 +00:00
toolchain	eglibc: add support for other mips64 ABI variants as well	2014-05-31 13:00:46 +00:00
tools	tools: genext2fs: add support for blocksize != 1024	2014-06-02 12:43:46 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	…
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
LICENSE	…
Makefile	build: remove duplicate variable definitions	2014-03-21 15:54:11 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
feeds.conf.default	feeds.conf.default: the telephony feed is now on git.openwrt.org	2014-04-19 17:26:11 +00:00
rules.mk	partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk"	2014-03-22 19:52:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org