openwrt-owl

Go to file

Vasilis Tsiligiannis 98372a8eb5 base-files: Fix IPv6 address and route adding on aliases with no IPv4 address configured SVN-Revision: 28241		2011-09-14 13:37:44 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	kernel: update to version 3.0.3	2011-08-18 12:54:12 +00:00
package	base-files: Fix IPv6 address and route adding on aliases with no IPv4 address configured	2011-09-14 13:37:44 +00:00
scripts	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
target	fix generation for arm platforms Based on patch by Roman Yeryomin <roman@advem.lv>	2011-09-13 07:39:14 +00:00
toolchain	uclibc: backport upstream signalfd patch	2011-08-25 15:59:21 +00:00
tools	mkimage/getline.h - Mac OS X 10.7 (Lion) fix	2011-08-05 16:53:43 +00:00
.gitignore	add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile	…
Config.in	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00
LICENSE	…
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	rules.mk: provide a LIBGCC_A variable	2011-09-05 19:29:22 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org