openwrt-owl

Go to file

Gabor Juhos 9801351c84 ar71xx: add kernel support for GL-Inet V1 boards/routers The GL-Connect GL.iNet v1 router is basically a TP-Link TL-WR703N with more DRAM/Flash, 2x Ethernet ports and console/GPIO header in the same small form-factor: <http://www.gl-inet.com/w/?lang=en> Moreover, the manufacturer is promoting the OpenWrt usage to replace the original firmware and proposing patches against both AA and trunk: <http://www.gl-inet.com/w/?p=398&lang=en> This is a clean up of the original manufacturer GPLv2 patch by alzhao, proposed to the list by Mark Janssen. Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Mark Janssen <mark@sig-io.nl> Signed-off-by: alzhao <alzhao@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5273/ [juhosg: - remove user-space and image generation support, will be included from other patches, - fix coding style and drop superfluous comment in mach-gl-inet.c, - rename and refresh kernel patch, - adjust subject] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41618		2014-07-13 18:21:04 +00:00
config	config/Config-images.in: enable zlib as the default ubi compression	2014-06-24 18:14:05 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update 3.14 to 3.14.12	2014-07-11 13:28:44 +00:00
package	base-files: adjust the default netfilter tcp established connection timeout as per RFC 5382 (#17098 )	2014-07-13 10:24:34 +00:00
scripts	scripts/abs2rel.pl: remove, it is unused	2014-07-04 12:11:40 +00:00
target	ar71xx: add kernel support for GL-Inet V1 boards/routers	2014-07-13 18:21:04 +00:00
toolchain	toolchain: switch back to uClibc for octeon, it actually works now	2014-07-10 20:48:31 +00:00
tools	b43-tools: b43-fwsquash.py: manually remove LP-PHY 16 support	2014-07-12 15:41:50 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: remove duplicate variable definitions	2014-03-21 15:54:11 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
feeds.conf.default	feeds.conf.default: add management feed	2014-06-12 15:08:08 +00:00
rules.mk	partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk"	2014-03-22 19:52:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org