John Crispin 911cf6da60 ar71xx: Enable AT803X_PHY to set special flags ... Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY requires special flags to work correctly. Otherwise massive packet loss happens with active POE or when switching the link speed from gigabit ethernet to fast ethernet. The generic PHY doesn't have support to change these settings. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45439		2015-04-14 19:00:57 +00:00
..
base-files	ar71xx: enable LEDs on Hornet-UB X2	2015-04-09 10:32:08 +00:00
files	ar71xx: fix ethernet packet loss issues on OM5P-AN	2015-04-14 19:00:51 +00:00
generic	ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board	2015-03-17 09:43:56 +00:00
image	ar71xx: fix new mktplinkfw image code - flags for sysupgrade vs factory were swapped (fixes #19400)	2015-04-06 19:26:30 +00:00
mikrotik	ar71xx: add initial support for RB911G-5HPacD	2015-04-07 20:04:03 +00:00
nand	Netgear R6100 support	2014-11-26 08:28:22 +00:00
patches-3.18	kernel: remove ATHEROS_AR{231X,71XX} config symbols from the patches	2015-04-08 16:21:04 +00:00
Makefile	ar71xx: make v3.18 default	2015-02-17 14:33:29 +00:00
base-files.mk	ar71xx: drop procd_init console hack	2013-06-21 16:53:11 +00:00
config-3.18	ar71xx: Enable AT803X_PHY to set special flags	2015-04-14 19:00:57 +00:00
modules.mk	ar71xx: always enable hw ecc support for the ar934x-nfc module	2013-11-01 18:33:18 +00:00