mirror of https://github.com/hak5/openwrt-owl.git
109 lines
2.3 KiB
Diff
109 lines
2.3 KiB
Diff
From 4490cfa66379909cdddc3518c8e75b7cd26d8f69 Mon Sep 17 00:00:00 2001
|
|
From: Andy Gross <agross@codeaurora.org>
|
|
Date: Mon, 16 Jun 2014 16:53:49 -0500
|
|
Subject: [PATCH 151/182] ARM: ipq8064: Add nand device info
|
|
|
|
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 34 ++++++++++++++++++++++++++++++
|
|
arch/arm/boot/dts/qcom-ipq8064.dtsi | 33 +++++++++++++++++++++++++++++
|
|
2 files changed, 67 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
@@ -45,6 +45,29 @@
|
|
bias-none;
|
|
};
|
|
};
|
|
+ nand_pins: nand_pins {
|
|
+ mux {
|
|
+ pins = "gpio34", "gpio35", "gpio36",
|
|
+ "gpio37", "gpio38", "gpio39",
|
|
+ "gpio40", "gpio41", "gpio42",
|
|
+ "gpio43", "gpio44", "gpio45",
|
|
+ "gpio46", "gpio47";
|
|
+ function = "nand";
|
|
+ drive-strength = <10>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ pullups {
|
|
+ pins = "gpio39";
|
|
+ bias-pull-up;
|
|
+ };
|
|
+ hold {
|
|
+ pins = "gpio40", "gpio41", "gpio42",
|
|
+ "gpio43", "gpio44", "gpio45",
|
|
+ "gpio46", "gpio47";
|
|
+ bias-bus-hold;
|
|
+ };
|
|
+ };
|
|
+
|
|
};
|
|
|
|
gsbi@16300000 {
|
|
@@ -126,5 +149,16 @@
|
|
sata@29000000 {
|
|
status = "ok";
|
|
};
|
|
+
|
|
+ dma@18300000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ nand@0x1ac00000 {
|
|
+ status = "ok";
|
|
+
|
|
+ pinctrl-0 = <&nand_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
@@ -76,6 +76,7 @@
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 32 0x4>;
|
|
+
|
|
};
|
|
|
|
intc: interrupt-controller@2000000 {
|
|
@@ -369,5 +370,37 @@
|
|
phy-names = "sata-phy";
|
|
status = "disabled";
|
|
};
|
|
+
|
|
+ adm_dma: dma@18300000 {
|
|
+ compatible = "qcom,adm";
|
|
+ reg = <0x18300000 0x100000>;
|
|
+ interrupts = <0 170 0>;
|
|
+
|
|
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
|
|
+ clock-names = "core_clk", "iface_clk";
|
|
+
|
|
+ resets = <&gcc ADM0_RESET>,
|
|
+ <&gcc ADM0_PBUS_RESET>,
|
|
+ <&gcc ADM0_C0_RESET>,
|
|
+ <&gcc ADM0_C1_RESET>,
|
|
+ <&gcc ADM0_C2_RESET>;
|
|
+
|
|
+ reset-names = "adm", "pbus", "c0", "c1", "c2";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ nand@0x1ac00000 {
|
|
+ compatible = "qcom,qcom_nand";
|
|
+ reg = <0x1ac00000 0x800>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ clocks = <&gcc EBI2_CLK>;
|
|
+ clock-names = "core_clk";
|
|
+
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
};
|
|
};
|