openwrt-owl

Go to file

Ralph Hempel 91042e02a7 strip relocatable binaries (not depending on the extension) ( thanks to Thomas ) SVN-Revision: 14726		2009-03-02 17:33:02 +00:00
docs	allow mac80211 devices to be configured to do 802.11s, requires iw	2009-02-26 14:53:03 +00:00
include	readd $(HOST_CONFIGURE_VARS) to Host/Configure/Default, missed in r14699	2009-03-02 03:03:21 +00:00
package	fixed KCONFIG selection of "CONFIG_CRYPTO_AES_586".	2009-03-02 11:47:25 +00:00
scripts	strip relocatable binaries (not depending on the extension) ( thanks to Thomas )	2009-03-02 17:33:02 +00:00
target	refresh patches and configuration	2009-03-01 20:19:55 +00:00
toolchain	fix powerpc build (works for 2.4 and 2.6)	2009-03-01 11:04:08 +00:00
tools	add dependency (needed for parallel build)	2009-03-01 09:47:05 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add the possibility to put the rootfs to another location (usefull to specify one dedicated NFS export share regardless where in the compute farm the build is done)	2009-02-20 10:38:08 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	remove toolchain build directory as well in 'make dirclean'	2008-12-03 04:22:41 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Add desktop and xfce feed to feeds.conf.default	2009-01-19 19:46:03 +00:00
rules.mk	second part of target rootfs relocation	2009-02-20 10:44:19 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org