mirror of https://github.com/hak5/openwrt-owl.git
439 lines
11 KiB
Diff
439 lines
11 KiB
Diff
From a12f522b48a8cb637c1c026b46a76b2ef7983f8d Mon Sep 17 00:00:00 2001
|
|
From: Yangbo Lu <yangbo.lu@nxp.com>
|
|
Date: Mon, 25 Sep 2017 12:12:41 +0800
|
|
Subject: [PATCH] spi: support layerscape
|
|
|
|
This is a integrated patch for layerscape dspi support.
|
|
|
|
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
|
|
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
|
|
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
|
|
---
|
|
drivers/spi/Kconfig | 1 +
|
|
drivers/spi/spi-fsl-dspi.c | 309 ++++++++++++++++++++++++++++++++++++++++++++-
|
|
2 files changed, 305 insertions(+), 5 deletions(-)
|
|
|
|
--- a/drivers/spi/Kconfig
|
|
+++ b/drivers/spi/Kconfig
|
|
@@ -365,6 +365,7 @@ config SPI_FSL_SPI
|
|
config SPI_FSL_DSPI
|
|
tristate "Freescale DSPI controller"
|
|
select REGMAP_MMIO
|
|
+ depends on HAS_DMA
|
|
depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
|
|
help
|
|
This enables support for the Freescale DSPI controller in master
|
|
--- a/drivers/spi/spi-fsl-dspi.c
|
|
+++ b/drivers/spi/spi-fsl-dspi.c
|
|
@@ -15,6 +15,8 @@
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
+#include <linux/dmaengine.h>
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
@@ -40,6 +42,7 @@
|
|
#define TRAN_STATE_WORD_ODD_NUM 0x04
|
|
|
|
#define DSPI_FIFO_SIZE 4
|
|
+#define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024)
|
|
|
|
#define SPI_MCR 0x00
|
|
#define SPI_MCR_MASTER (1 << 31)
|
|
@@ -72,6 +75,11 @@
|
|
#define SPI_SR_TCFQF 0x80000000
|
|
#define SPI_SR_CLEAR 0xdaad0000
|
|
|
|
+#define SPI_RSER_TFFFE BIT(25)
|
|
+#define SPI_RSER_TFFFD BIT(24)
|
|
+#define SPI_RSER_RFDFE BIT(17)
|
|
+#define SPI_RSER_RFDFD BIT(16)
|
|
+
|
|
#define SPI_RSER 0x30
|
|
#define SPI_RSER_EOQFE 0x10000000
|
|
#define SPI_RSER_TCFQE 0x80000000
|
|
@@ -109,6 +117,8 @@
|
|
|
|
#define SPI_TCR_TCNT_MAX 0x10000
|
|
|
|
+#define DMA_COMPLETION_TIMEOUT msecs_to_jiffies(3000)
|
|
+
|
|
struct chip_data {
|
|
u32 mcr_val;
|
|
u32 ctar_val;
|
|
@@ -118,6 +128,7 @@ struct chip_data {
|
|
enum dspi_trans_mode {
|
|
DSPI_EOQ_MODE = 0,
|
|
DSPI_TCFQ_MODE,
|
|
+ DSPI_DMA_MODE,
|
|
};
|
|
|
|
struct fsl_dspi_devtype_data {
|
|
@@ -126,7 +137,7 @@ struct fsl_dspi_devtype_data {
|
|
};
|
|
|
|
static const struct fsl_dspi_devtype_data vf610_data = {
|
|
- .trans_mode = DSPI_EOQ_MODE,
|
|
+ .trans_mode = DSPI_DMA_MODE,
|
|
.max_clock_factor = 2,
|
|
};
|
|
|
|
@@ -140,6 +151,23 @@ static const struct fsl_dspi_devtype_dat
|
|
.max_clock_factor = 8,
|
|
};
|
|
|
|
+struct fsl_dspi_dma {
|
|
+ /* Length of transfer in words of DSPI_FIFO_SIZE */
|
|
+ u32 curr_xfer_len;
|
|
+
|
|
+ u32 *tx_dma_buf;
|
|
+ struct dma_chan *chan_tx;
|
|
+ dma_addr_t tx_dma_phys;
|
|
+ struct completion cmd_tx_complete;
|
|
+ struct dma_async_tx_descriptor *tx_desc;
|
|
+
|
|
+ u32 *rx_dma_buf;
|
|
+ struct dma_chan *chan_rx;
|
|
+ dma_addr_t rx_dma_phys;
|
|
+ struct completion cmd_rx_complete;
|
|
+ struct dma_async_tx_descriptor *rx_desc;
|
|
+};
|
|
+
|
|
struct fsl_dspi {
|
|
struct spi_master *master;
|
|
struct platform_device *pdev;
|
|
@@ -166,8 +194,11 @@ struct fsl_dspi {
|
|
u32 waitflags;
|
|
|
|
u32 spi_tcnt;
|
|
+ struct fsl_dspi_dma *dma;
|
|
};
|
|
|
|
+static u32 dspi_data_to_pushr(struct fsl_dspi *dspi, int tx_word);
|
|
+
|
|
static inline int is_double_byte_mode(struct fsl_dspi *dspi)
|
|
{
|
|
unsigned int val;
|
|
@@ -177,6 +208,255 @@ static inline int is_double_byte_mode(st
|
|
return ((val & SPI_FRAME_BITS_MASK) == SPI_FRAME_BITS(8)) ? 0 : 1;
|
|
}
|
|
|
|
+static void dspi_tx_dma_callback(void *arg)
|
|
+{
|
|
+ struct fsl_dspi *dspi = arg;
|
|
+ struct fsl_dspi_dma *dma = dspi->dma;
|
|
+
|
|
+ complete(&dma->cmd_tx_complete);
|
|
+}
|
|
+
|
|
+static void dspi_rx_dma_callback(void *arg)
|
|
+{
|
|
+ struct fsl_dspi *dspi = arg;
|
|
+ struct fsl_dspi_dma *dma = dspi->dma;
|
|
+ int rx_word;
|
|
+ int i;
|
|
+ u16 d;
|
|
+
|
|
+ rx_word = is_double_byte_mode(dspi);
|
|
+
|
|
+ if (!(dspi->dataflags & TRAN_STATE_RX_VOID)) {
|
|
+ for (i = 0; i < dma->curr_xfer_len; i++) {
|
|
+ d = dspi->dma->rx_dma_buf[i];
|
|
+ rx_word ? (*(u16 *)dspi->rx = d) :
|
|
+ (*(u8 *)dspi->rx = d);
|
|
+ dspi->rx += rx_word + 1;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ complete(&dma->cmd_rx_complete);
|
|
+}
|
|
+
|
|
+static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
|
|
+{
|
|
+ struct fsl_dspi_dma *dma = dspi->dma;
|
|
+ struct device *dev = &dspi->pdev->dev;
|
|
+ int time_left;
|
|
+ int tx_word;
|
|
+ int i;
|
|
+
|
|
+ tx_word = is_double_byte_mode(dspi);
|
|
+
|
|
+ for (i = 0; i < dma->curr_xfer_len; i++) {
|
|
+ dspi->dma->tx_dma_buf[i] = dspi_data_to_pushr(dspi, tx_word);
|
|
+ if ((dspi->cs_change) && (!dspi->len))
|
|
+ dspi->dma->tx_dma_buf[i] &= ~SPI_PUSHR_CONT;
|
|
+ }
|
|
+
|
|
+ dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
|
|
+ dma->tx_dma_phys,
|
|
+ dma->curr_xfer_len *
|
|
+ DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
+ DMA_MEM_TO_DEV,
|
|
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
+ if (!dma->tx_desc) {
|
|
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ dma->tx_desc->callback = dspi_tx_dma_callback;
|
|
+ dma->tx_desc->callback_param = dspi;
|
|
+ if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
|
|
+ dev_err(dev, "DMA submit failed\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
|
|
+ dma->rx_dma_phys,
|
|
+ dma->curr_xfer_len *
|
|
+ DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
+ DMA_DEV_TO_MEM,
|
|
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
+ if (!dma->rx_desc) {
|
|
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ dma->rx_desc->callback = dspi_rx_dma_callback;
|
|
+ dma->rx_desc->callback_param = dspi;
|
|
+ if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
|
|
+ dev_err(dev, "DMA submit failed\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ reinit_completion(&dspi->dma->cmd_rx_complete);
|
|
+ reinit_completion(&dspi->dma->cmd_tx_complete);
|
|
+
|
|
+ dma_async_issue_pending(dma->chan_rx);
|
|
+ dma_async_issue_pending(dma->chan_tx);
|
|
+
|
|
+ time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
|
|
+ DMA_COMPLETION_TIMEOUT);
|
|
+ if (time_left == 0) {
|
|
+ dev_err(dev, "DMA tx timeout\n");
|
|
+ dmaengine_terminate_all(dma->chan_tx);
|
|
+ dmaengine_terminate_all(dma->chan_rx);
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+
|
|
+ time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
|
|
+ DMA_COMPLETION_TIMEOUT);
|
|
+ if (time_left == 0) {
|
|
+ dev_err(dev, "DMA rx timeout\n");
|
|
+ dmaengine_terminate_all(dma->chan_tx);
|
|
+ dmaengine_terminate_all(dma->chan_rx);
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int dspi_dma_xfer(struct fsl_dspi *dspi)
|
|
+{
|
|
+ struct fsl_dspi_dma *dma = dspi->dma;
|
|
+ struct device *dev = &dspi->pdev->dev;
|
|
+ int curr_remaining_bytes;
|
|
+ int bytes_per_buffer;
|
|
+ int word = 1;
|
|
+ int ret = 0;
|
|
+
|
|
+ if (is_double_byte_mode(dspi))
|
|
+ word = 2;
|
|
+ curr_remaining_bytes = dspi->len;
|
|
+ bytes_per_buffer = DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE;
|
|
+ while (curr_remaining_bytes) {
|
|
+ /* Check if current transfer fits the DMA buffer */
|
|
+ dma->curr_xfer_len = curr_remaining_bytes / word;
|
|
+ if (dma->curr_xfer_len > bytes_per_buffer)
|
|
+ dma->curr_xfer_len = bytes_per_buffer;
|
|
+
|
|
+ ret = dspi_next_xfer_dma_submit(dspi);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "DMA transfer failed\n");
|
|
+ goto exit;
|
|
+
|
|
+ } else {
|
|
+ curr_remaining_bytes -= dma->curr_xfer_len * word;
|
|
+ if (curr_remaining_bytes < 0)
|
|
+ curr_remaining_bytes = 0;
|
|
+ }
|
|
+ }
|
|
+
|
|
+exit:
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
|
|
+{
|
|
+ struct fsl_dspi_dma *dma;
|
|
+ struct dma_slave_config cfg;
|
|
+ struct device *dev = &dspi->pdev->dev;
|
|
+ int ret;
|
|
+
|
|
+ dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
|
|
+ if (!dma)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ dma->chan_rx = dma_request_slave_channel(dev, "rx");
|
|
+ if (!dma->chan_rx) {
|
|
+ dev_err(dev, "rx dma channel not available\n");
|
|
+ ret = -ENODEV;
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ dma->chan_tx = dma_request_slave_channel(dev, "tx");
|
|
+ if (!dma->chan_tx) {
|
|
+ dev_err(dev, "tx dma channel not available\n");
|
|
+ ret = -ENODEV;
|
|
+ goto err_tx_channel;
|
|
+ }
|
|
+
|
|
+ dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
|
|
+ &dma->tx_dma_phys, GFP_KERNEL);
|
|
+ if (!dma->tx_dma_buf) {
|
|
+ ret = -ENOMEM;
|
|
+ goto err_tx_dma_buf;
|
|
+ }
|
|
+
|
|
+ dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
|
|
+ &dma->rx_dma_phys, GFP_KERNEL);
|
|
+ if (!dma->rx_dma_buf) {
|
|
+ ret = -ENOMEM;
|
|
+ goto err_rx_dma_buf;
|
|
+ }
|
|
+
|
|
+ cfg.src_addr = phy_addr + SPI_POPR;
|
|
+ cfg.dst_addr = phy_addr + SPI_PUSHR;
|
|
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
+ cfg.src_maxburst = 1;
|
|
+ cfg.dst_maxburst = 1;
|
|
+
|
|
+ cfg.direction = DMA_DEV_TO_MEM;
|
|
+ ret = dmaengine_slave_config(dma->chan_rx, &cfg);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "can't configure rx dma channel\n");
|
|
+ ret = -EINVAL;
|
|
+ goto err_slave_config;
|
|
+ }
|
|
+
|
|
+ cfg.direction = DMA_MEM_TO_DEV;
|
|
+ ret = dmaengine_slave_config(dma->chan_tx, &cfg);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "can't configure tx dma channel\n");
|
|
+ ret = -EINVAL;
|
|
+ goto err_slave_config;
|
|
+ }
|
|
+
|
|
+ dspi->dma = dma;
|
|
+ init_completion(&dma->cmd_tx_complete);
|
|
+ init_completion(&dma->cmd_rx_complete);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_slave_config:
|
|
+ dma_free_coherent(dev, DSPI_DMA_BUFSIZE,
|
|
+ dma->rx_dma_buf, dma->rx_dma_phys);
|
|
+err_rx_dma_buf:
|
|
+ dma_free_coherent(dev, DSPI_DMA_BUFSIZE,
|
|
+ dma->tx_dma_buf, dma->tx_dma_phys);
|
|
+err_tx_dma_buf:
|
|
+ dma_release_channel(dma->chan_tx);
|
|
+err_tx_channel:
|
|
+ dma_release_channel(dma->chan_rx);
|
|
+
|
|
+ devm_kfree(dev, dma);
|
|
+ dspi->dma = NULL;
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void dspi_release_dma(struct fsl_dspi *dspi)
|
|
+{
|
|
+ struct fsl_dspi_dma *dma = dspi->dma;
|
|
+ struct device *dev = &dspi->pdev->dev;
|
|
+
|
|
+ if (dma) {
|
|
+ if (dma->chan_tx) {
|
|
+ dma_unmap_single(dev, dma->tx_dma_phys,
|
|
+ DSPI_DMA_BUFSIZE, DMA_TO_DEVICE);
|
|
+ dma_release_channel(dma->chan_tx);
|
|
+ }
|
|
+
|
|
+ if (dma->chan_rx) {
|
|
+ dma_unmap_single(dev, dma->rx_dma_phys,
|
|
+ DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE);
|
|
+ dma_release_channel(dma->chan_rx);
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
|
|
unsigned long clkrate)
|
|
{
|
|
@@ -425,6 +705,12 @@ static int dspi_transfer_one_message(str
|
|
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
|
|
dspi_tcfq_write(dspi);
|
|
break;
|
|
+ case DSPI_DMA_MODE:
|
|
+ regmap_write(dspi->regmap, SPI_RSER,
|
|
+ SPI_RSER_TFFFE | SPI_RSER_TFFFD |
|
|
+ SPI_RSER_RFDFE | SPI_RSER_RFDFD);
|
|
+ status = dspi_dma_xfer(dspi);
|
|
+ break;
|
|
default:
|
|
dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
|
|
trans_mode);
|
|
@@ -432,9 +718,13 @@ static int dspi_transfer_one_message(str
|
|
goto out;
|
|
}
|
|
|
|
- if (wait_event_interruptible(dspi->waitq, dspi->waitflags))
|
|
- dev_err(&dspi->pdev->dev, "wait transfer complete fail!\n");
|
|
- dspi->waitflags = 0;
|
|
+ if (trans_mode != DSPI_DMA_MODE) {
|
|
+ if (wait_event_interruptible(dspi->waitq,
|
|
+ dspi->waitflags))
|
|
+ dev_err(&dspi->pdev->dev,
|
|
+ "wait transfer complete fail!\n");
|
|
+ dspi->waitflags = 0;
|
|
+ }
|
|
|
|
if (transfer->delay_usecs)
|
|
udelay(transfer->delay_usecs);
|
|
@@ -712,7 +1002,8 @@ static int dspi_probe(struct platform_de
|
|
if (IS_ERR(dspi->regmap)) {
|
|
dev_err(&pdev->dev, "failed to init regmap: %ld\n",
|
|
PTR_ERR(dspi->regmap));
|
|
- return PTR_ERR(dspi->regmap);
|
|
+ ret = PTR_ERR(dspi->regmap);
|
|
+ goto out_master_put;
|
|
}
|
|
|
|
dspi_init(dspi);
|
|
@@ -740,6 +1031,13 @@ static int dspi_probe(struct platform_de
|
|
if (ret)
|
|
goto out_master_put;
|
|
|
|
+ if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
|
|
+ if (dspi_request_dma(dspi, res->start)) {
|
|
+ dev_err(&pdev->dev, "can't get dma channels\n");
|
|
+ goto out_clk_put;
|
|
+ }
|
|
+ }
|
|
+
|
|
master->max_speed_hz =
|
|
clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
|
|
|
|
@@ -768,6 +1066,7 @@ static int dspi_remove(struct platform_d
|
|
struct fsl_dspi *dspi = spi_master_get_devdata(master);
|
|
|
|
/* Disconnect from the SPI framework */
|
|
+ dspi_release_dma(dspi);
|
|
clk_disable_unprepare(dspi->clk);
|
|
spi_unregister_master(dspi->master);
|
|
|