openwrt-owl

Go to file

Steven Barth 8f24ee6382 uqmi: Add proper IPv6 support Use the new --ip-family option to start both IPv4 and IPv6 sessions by default. Autoconnect can't be used when starting two sessions, so revert back to using the client IDs and packet data handles for handling the network connection. Some modem firmwares do not implement a RA server, therefore by default use outband IP configuration and static addressing. Some other firmwares report bogus IP configuration with the WDS get current settings command. In this case inband configuration with DHCP/RA can be optionally enabled by setting option dhcp to 1. Per 3GPP standard a /64 prefix is served to all clients, which is extended to LAN as specified in RFC 7278. v2: Restrict the IPv6 gateway route source address Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46843		2015-09-11 06:46:40 +00:00
config	linux: make IPv6 builtin if selected (saves >30KB)	2015-09-09 12:20:36 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	nls.mk: add -rpath-link when needed for NLS support	2015-09-07 08:03:34 +00:00
package	uqmi: Add proper IPv6 support	2015-09-11 06:46:40 +00:00
scripts	build: add a build step for generic sysupgrade nand image	2015-09-04 14:44:27 +00:00
target	imagebuilder: run build prereq checks before building image to set up host commands properly	2015-09-10 11:06:42 +00:00
toolchain	musl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma	2015-09-08 10:57:11 +00:00
tools	tools/firmware-utils: add header version 2 support for mktplinkfw	2015-08-17 06:23:43 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	…
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
LICENSE	…
Makefile	Makefile: move the cleaning of staging_dir/target* from dirclean to clean	2015-06-14 17:47:16 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
rules.mk	rules.mk: remove GCC 4.4 and GCC 4.5 conditional	2015-08-25 07:45:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org