openwrt-owl/target/linux/ramips/dts/PSG1208.dts

113 lines
1.6 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "PSG1208", "ralink,mt7620a-soc";
model = "Phicomm PSG1208";
gpio-leds {
compatible = "gpio-leds";
wan {
label = "psg1208:white:wps";
gpios = <&gpio1 15 1>;
};
wlan {
label = "psg1208:white:wlan2g";
gpios = <&gpio3 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "en25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@20000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@30000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
ralink,function = "gpio";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};