openwrt-owl

Go to file

Felix Fietkau 8bf5ee0324 atheros: remove 2.6.28 support SVN-Revision: 17593		2009-09-16 12:24:22 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	build prereq: look for tar under the name "gnutar" as well	2009-09-14 10:40:04 +00:00
package	madwifi: fix iwconfig tx power display	2009-09-16 12:02:10 +00:00
scripts	scripts/feeds: fix an error message	2009-08-31 14:28:24 +00:00
target	atheros: remove 2.6.28 support	2009-09-16 12:24:22 +00:00
toolchain	add comments & fix descriptions in toolchain config items	2009-09-10 14:32:36 +00:00
tools	fix error in mksquashfs4 when data can't be compressed	2009-09-15 09:01:27 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	prepare for upcoming external toolchain support: move config items not strictly toolchain related out of the toolchain submenu	2009-09-10 14:04:41 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	2009-08-20 15:31:17 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org