openwrt-owl

Go to file

Jo-Philipp Wich 8b9ca16985 add support for flagging packages SVN-Revision: 23172		2010-10-02 03:21:33 +00:00
docs	…
include	add support for flagging packages	2010-10-02 03:21:33 +00:00
package	package/grub: revert accidental/unessesery grub commit	2010-10-01 16:43:46 +00:00
scripts	feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies	2010-10-02 02:37:27 +00:00
target	ar71xx: initial support for jjPlus JWAP003	2010-10-01 07:09:29 +00:00
toolchain	gcc: enable non-PIC for mips targets in gcc 4.4+ to reduce code size	2010-09-20 20:49:34 +00:00
tools	tools/mtd-utils: update to mtd-utils-20101001, fix FreeBSD (and hopefully Darwin) build issues.	2010-10-01 16:39:08 +00:00
.gitignore	…
BSDmakefile	…
Config.in	Add support for enabling early printk. Currently only for ARM, because I don't know what EARLY_PRINTK depends on on other architectures.	2010-09-15 16:27:02 +00:00
LICENSE	…
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	…
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
rules.mk	drop the usr/ prefix when scanning for libgcc.a	2010-09-12 22:19:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org