mirror of https://github.com/hak5/openwrt-owl.git
228 lines
5.9 KiB
Diff
228 lines
5.9 KiB
Diff
From fb6f6f58db9ae9cf27ab01f5f09cfbc5c078a7b8 Mon Sep 17 00:00:00 2001
|
|
From: Jonas Gorski <jonas.gorski@gmail.com>
|
|
Date: Thu, 3 May 2012 14:36:11 +0200
|
|
Subject: [PATCH 66/80] BCM63XX: add a fixup for ath9k devices
|
|
|
|
---
|
|
arch/mips/bcm63xx/Makefile | 2 +-
|
|
arch/mips/bcm63xx/pci-ath9k-fixup.c | 190 ++++++++++++++++++++
|
|
.../include/asm/mach-bcm63xx/pci_ath9k_fixup.h | 7 +
|
|
3 files changed, 198 insertions(+), 1 deletion(-)
|
|
create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
|
|
create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
|
|
|
|
--- a/arch/mips/bcm63xx/Makefile
|
|
+++ b/arch/mips/bcm63xx/Makefile
|
|
@@ -1,7 +1,7 @@
|
|
obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o setup.o \
|
|
timer.o dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o \
|
|
dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-usb-ehci.o \
|
|
- dev-usb-ohci.o dev-wdt.o
|
|
+ dev-usb-ohci.o dev-wdt.o pci-ath9k-fixup.o
|
|
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
|
|
|
obj-y += boards/
|
|
--- /dev/null
|
|
+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
|
|
@@ -0,0 +1,190 @@
|
|
+/*
|
|
+ * Broadcom BCM63XX Ath9k EEPROM fixup helper.
|
|
+ *
|
|
+ * Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
|
|
+ *
|
|
+ * Based on
|
|
+ *
|
|
+ * Atheros AP94 reference board PCI initialization
|
|
+ *
|
|
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
|
+ * by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/pci.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/ath9k_platform.h>
|
|
+
|
|
+#include <bcm63xx_cpu.h>
|
|
+#include <bcm63xx_io.h>
|
|
+#include <bcm63xx_nvram.h>
|
|
+#include <bcm63xx_dev_pci.h>
|
|
+#include <bcm63xx_dev_flash.h>
|
|
+#include <bcm63xx_dev_hsspi.h>
|
|
+#include <pci_ath9k_fixup.h>
|
|
+
|
|
+struct ath9k_fixup {
|
|
+ unsigned slot;
|
|
+ u8 mac[ETH_ALEN];
|
|
+ struct ath9k_platform_data pdata;
|
|
+};
|
|
+
|
|
+static int ath9k_num_fixups;
|
|
+static struct ath9k_fixup ath9k_fixups[2] = {
|
|
+ {
|
|
+ .slot = 255,
|
|
+ .pdata = {
|
|
+ .led_pin = -1,
|
|
+ },
|
|
+ },
|
|
+ {
|
|
+ .slot = 255,
|
|
+ .pdata = {
|
|
+ .led_pin = -1,
|
|
+ },
|
|
+ },
|
|
+};
|
|
+
|
|
+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
|
|
+{
|
|
+ u32 addr;
|
|
+
|
|
+ if (BCMCPU_IS_6328()) {
|
|
+ addr = 0x18000000;
|
|
+ } else {
|
|
+ addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
|
|
+ addr &= MPI_CSBASE_BASE_MASK;
|
|
+ }
|
|
+
|
|
+ switch (bcm63xx_attached_flash) {
|
|
+ case BCM63XX_FLASH_TYPE_PARALLEL:
|
|
+ memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
|
|
+ return eeprom;
|
|
+ case BCM63XX_FLASH_TYPE_SERIAL:
|
|
+ /* the first megabyte is memory mapped */
|
|
+ if (offset < 0x100000) {
|
|
+ memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
|
|
+ return eeprom;
|
|
+ }
|
|
+
|
|
+ if (BCMCPU_IS_6328()) {
|
|
+ /* we can change the memory mapped megabyte */
|
|
+ bcm_hsspi_writel(offset & 0xf00000, 0x18);
|
|
+ memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
|
|
+ bcm_hsspi_writel(0, 0x18);
|
|
+ return eeprom;
|
|
+ }
|
|
+ /* can't do anything here without talking to the SPI controller. */
|
|
+ case BCM63XX_FLASH_TYPE_NAND:
|
|
+ default:
|
|
+ return NULL;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void ath9k_pci_fixup(struct pci_dev *dev)
|
|
+{
|
|
+ void __iomem *mem;
|
|
+ struct ath9k_platform_data *pdata = NULL;
|
|
+ u16 *cal_data = NULL;
|
|
+ u16 cmd;
|
|
+ u32 bar0;
|
|
+ u32 val;
|
|
+ unsigned i;
|
|
+
|
|
+ for (i = 0; i < ath9k_num_fixups; i++) {
|
|
+ if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
|
|
+ continue;
|
|
+
|
|
+ cal_data = ath9k_fixups[i].pdata.eeprom_data;
|
|
+ pdata = &ath9k_fixups[i].pdata;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if (cal_data == NULL)
|
|
+ return;
|
|
+
|
|
+ if (*cal_data != 0xa55a) {
|
|
+ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
|
|
+
|
|
+ switch (bcm63xx_get_cpu_id()) {
|
|
+ case BCM6328_CPU_ID:
|
|
+ val = BCM_PCIE_MEM_BASE_PA;
|
|
+ break;
|
|
+ case BCM6348_CPU_ID:
|
|
+ case BCM6358_CPU_ID:
|
|
+ case BCM6368_CPU_ID:
|
|
+ val = BCM_PCI_MEM_BASE_PA;
|
|
+ break;
|
|
+ default:
|
|
+ BUG();
|
|
+ }
|
|
+
|
|
+ mem = ioremap(val, 0x10000);
|
|
+ if (!mem) {
|
|
+ pr_err("pci %s: ioremap error\n", pci_name(dev));
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
|
|
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
|
|
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
|
|
+
|
|
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
+
|
|
+ /* set offset to first reg address */
|
|
+ cal_data += 3;
|
|
+ while(*cal_data != 0xffff) {
|
|
+ u32 reg;
|
|
+ reg = *cal_data++;
|
|
+ val = *cal_data++;
|
|
+ val |= (*cal_data++) << 16;
|
|
+
|
|
+ writel(val, mem + reg);
|
|
+ udelay(100);
|
|
+ }
|
|
+
|
|
+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
|
|
+ dev->vendor = val & 0xffff;
|
|
+ dev->device = (val >> 16) & 0xffff;
|
|
+
|
|
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
|
|
+ dev->revision = val & 0xff;
|
|
+ dev->class = val >> 8; /* upper 3 bytes */
|
|
+
|
|
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
|
|
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
+
|
|
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
|
|
+
|
|
+ iounmap(mem);
|
|
+
|
|
+ dev->dev.platform_data = pdata;
|
|
+}
|
|
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
|
|
+
|
|
+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
|
|
+{
|
|
+ if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
|
|
+ return;
|
|
+
|
|
+ ath9k_fixups[ath9k_num_fixups].slot = slot;
|
|
+
|
|
+ if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
|
|
+ return;
|
|
+
|
|
+ if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
|
|
+ return;
|
|
+
|
|
+ ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
|
|
+ ath9k_num_fixups++;
|
|
+}
|
|
--- /dev/null
|
|
+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
|
|
@@ -0,0 +1,7 @@
|
|
+#ifndef _PCI_ATH9K_FIXUP
|
|
+#define _PCI_ATH9K_FIXUP
|
|
+
|
|
+
|
|
+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
|
|
+
|
|
+#endif /* _PCI_ATH9K_FIXUP */
|