openwrt-owl/target/linux/ramips
Yo Abe 29097b95ba ramips: fix WLI-TX4-AG300N boot and network
Partition label "linux" prevents the root file system to be mounted at
boot time leading to a kernel panic. After changing it to "firmware",
the 2 uimage partitions "kernel", "rootfs" and squashfs "rootfs_data"
are correctly recognized.

The attached IP175C 10/100 MBit switch cannot connect to a link with
fixed 1000Mbit speed. The correct link speed is 100MBit. The switch
is detected and can be configured via mdio bus and should allow two
separable VLANs to be configured for the 4 available ports.

Signed-off-by: Yo Abe <abe.geel@gmail.com>
[picked from openwrt/PR#330]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-13 08:32:35 +01:00
..
base-files ramips: add support for VoCore2 2017-01-13 08:32:35 +01:00
dts ramips: fix WLI-TX4-AG300N boot and network 2017-01-13 08:32:35 +01:00
image ramips: add support for VoCore2 2017-01-13 08:32:35 +01:00
mt7620 switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
mt7621 kernel: remove ubifs xz decompression support 2017-01-09 14:07:06 +01:00
mt7628 switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
mt7688 switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
patches-4.4 ramips: rt3883: fix typo in pinctrl lna_g_func 2017-01-13 05:44:06 +01:00
rt288x ramips: add support for PCI based OHCI/EHCI support for F5D8235 V1 2016-12-04 07:03:17 +01:00
rt305x switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
rt3883 ramips: enable 4K sector support in kernel config 2016-09-13 22:06:08 +02:00
Makefile build: fix subtarget descriptions 2016-09-04 13:35:11 +02:00
modules.mk ramips: Use MT7621 I2C driver for MT7628/MT7688 2016-11-03 08:27:20 +01:00