mirror of https://github.com/hak5/openwrt-owl.git
53 lines
1.3 KiB
Diff
53 lines
1.3 KiB
Diff
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
@@ -47,14 +47,12 @@
|
|
status = "ok";
|
|
};
|
|
|
|
- i2c4: i2c@16380000 {
|
|
- status = "ok";
|
|
-
|
|
- clock-frequency = <200000>;
|
|
-
|
|
- pinctrl-0 = <&i2c4_pins>;
|
|
- pinctrl-names = "default";
|
|
- };
|
|
+ /*
|
|
+ * The i2c device on gsbi4 should not be enabled.
|
|
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
|
|
+ * RPM usage. Turning this on in kernel manifests as
|
|
+ * i2c failure for the RPM.
|
|
+ */
|
|
};
|
|
|
|
gsbi5: gsbi@1a200000 {
|
|
--- a/drivers/clk/qcom/gcc-ipq806x.c
|
|
+++ b/drivers/clk/qcom/gcc-ipq806x.c
|
|
@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
|
|
.parent_names = gcc_pxo_pll8,
|
|
.num_parents = 2,
|
|
.ops = &clk_rcg_ops,
|
|
- .flags = CLK_SET_PARENT_GATE,
|
|
+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
|
|
},
|
|
},
|
|
};
|
|
@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
|
|
},
|
|
.num_parents = 1,
|
|
.ops = &clk_branch_ops,
|
|
- .flags = CLK_SET_RATE_PARENT,
|
|
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
|
|
},
|
|
},
|
|
};
|
|
@@ -890,7 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "gsbi1_h_clk",
|
|
.ops = &clk_branch_ops,
|
|
- .flags = CLK_IS_ROOT,
|
|
+ .flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,
|
|
},
|
|
},
|
|
};
|