openwrt-owl/target/linux/brcm63xx/dts/dsl-2650u.dts

64 lines
1016 B
Plaintext

/dts-v1/;
#include "bcm6358.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "D-Link DSL-2650U";
compatible = "d-link,dsl-2650u", "brcm,bcm6358";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
stop_green {
label = "96358VW2:green:stop";
gpios = <&pinctrl 4 1>;
};
power_green {
label = "96358VW2:green:power";
gpios = <&pinctrl 5 1>;
default-state = "on";
};
adsl_green {
label = "96358VW2:green:adsl";
gpios = <&pinctrl 22 1>;
};
ppp_fail_green {
label = "96358VW2:green:ppp-fail";
gpios = <&pinctrl 23 0>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
&uart0 {
status = "ok";
};