openwrt-owl/target/linux/brcm63xx/dts/av4202n.dts

96 lines
1.7 KiB
Plaintext

/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "ADB P.DG AV4202N";
compatible = "adb,av4202n", "brcm,bcm6368";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
reset {
label = "reset";
gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wlan {
label = "wlan";
gpios = <&pinctrl 37 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WLAN>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_white {
label = "AV4202N:white:power";
gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power_red {
label = "AV4202N:red:power";
gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
};
wan_white {
label = "AV4202N:white:wan";
gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
};
wan_red {
label = "AV4202N:red:wan";
gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
};
phone_white {
label = "AV4202N:white:phone";
gpios = <&pinctrl 24 GPIO_ACTIVE_LOW>;
};
phone_red {
label = "AV4202N:red:phone";
gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>;
};
wifi {
label = "AV4202N:blue:wifi";
gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
linux@20000 {
label = "linux";
reg = <0x020000 0xfc0000>;
};
nvram@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};
&uart0 {
status = "ok";
};