openwrt-owl/target/linux/brcm63xx/dts/a4001n.dts

98 lines
1.6 KiB
Plaintext

/dts-v1/;
#include "bcm6328.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "ADB P.DG A4001N";
compatible = "adb,a4001n", "brcm,bcm6328";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
reset {
label = "reset";
gpios = <&pinctrl 23 1>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&pinctrl 24 1>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
inet_red {
label = "A4001N:red:inet";
gpios = <&pinctrl 1 0>;
};
power_red {
label = "A4001N:red:power";
gpios = <&pinctrl 4 0>;
};
power_green {
label = "A4001N:green:power";
gpios = <&pinctrl 8 0>;
default-state = "on";
};
usb_green {
label = "A4001N:green:usb";
gpios = <&pinctrl 10 1>;
};
dsl_green {
label = "A4001N:green:dsl";
gpios = <&pinctrl 11 1>;
};
};
};
&hsspi {
status = "ok";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <16666667>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
linux,part-probe = "bcm63xxpart";
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0x7e0000>;
label = "linux";
};
nvram@7f0000 {
reg = <0x7f0000 0x010000>;
label = "nvram";
};
};
};
&uart0 {
status = "ok";
};