openwrt-owl

Go to file

Florian Fainelli 83849946b4 Add ipv6 support to PPP SVN-Revision: 5708		2006-12-07 13:58:21 +00:00
docs	some more build docs	2006-11-26 21:28:16 +00:00
include	build all packages in a package directory by default if DEVELOPER or SDK is set	2006-11-30 21:39:37 +00:00
package	Add ipv6 support to PPP	2006-12-07 13:58:21 +00:00
scripts	strip trailing / from download urls	2006-12-06 19:29:11 +00:00
target	improve the stability of via-rhine with large packet sizes and high network load	2006-12-07 06:17:38 +00:00
toolchain	use the gcc 4.2 snapshot in x86-2.6 by default - seems to work better than 4.1.1	2006-12-07 04:08:04 +00:00
tools	remove custom partition table hack, add ptgen utility for generating partition tables	2006-12-07 00:26:26 +00:00
BSDmakefile	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Config.in	move target/image/platform to target/linux/platform/image platform directories are now self contained	2006-11-28 20:14:41 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	trivial changes	2006-11-28 20:12:48 +00:00
README	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
rules.mk	add INSTALL_BIN, INSTALL_DIR, INSTALL_DATA variables	2006-11-22 23:05:54 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The buildroot system is documented in docs/buildroot-documentation.html.

Building your own firmware you need to have access to a Linux system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org