openwrt-owl/target/linux/ar71xx/files/arch/mips/ath79
Gabor Juhos 7a709573d7 ar71xx: add kernel support for the Mikrotik RB951G board
This is platform definition for the RB951G device. It's mostly rework
of RB2011UAS patchset with network taken from the RB751 patches.
The main difference is the flash layout used by this device.

[juhosg:
  - remove dead code from mach-rb951g
  - add "-2HnD" suffix to the machine name
  - use a separate 615-MIPS-ath79-RB951G-support.patch]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35633
2013-02-17 10:08:35 +00:00
..
dev-ap9x-pci.c ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-ap9x-pci.h ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-dsa.c
dev-dsa.h
dev-eth.c ar71xx: fix ethernet device registration for the QCA9556 SoC 2013-01-29 19:12:28 +00:00
dev-eth.h ar71xx: add a helper function for setting up ETH_CFG register on AR934x 2012-10-17 18:27:45 +00:00
dev-m25p80.c ar71xx: enable fast flash read on dual-flash devices 2013-01-29 19:12:25 +00:00
dev-m25p80.h
dev-nfc.c ar71xx: allow to register the NAND flash controller on the QCA955x 2013-01-01 13:10:36 +00:00
dev-nfc.h ar71xx: ar934x_nfc: allow to control DMA data swap via platform data 2012-12-10 10:38:07 +00:00
mach-alfa-ap96.c
mach-alfa-nx.c
mach-all0258n.c ar71xx: remove the built-in MTD map of the ALL0258N 2012-07-03 15:24:01 +00:00
mach-all0315n.c ar71xx: all0315n: fix ethernet according to vendor info 2012-08-29 10:37:54 +00:00
mach-ap83.c
mach-ap96.c
mach-ap113.c
mach-ap132.c ar71xx: add kernel support for Atheros AP132 Reference Board 2013-01-29 19:12:30 +00:00
mach-aw-nr580.c
mach-cap4200ag.c ar71xx: add support for the Senao CAP4200AG board 2012-10-27 08:55:38 +00:00
mach-dir-600-a1.c
mach-dir-615-c1.c
mach-dir-825-b1.c ar71xx: automatically find WLAN calibration data on DIR-825-B1 2012-09-25 12:57:38 +00:00
mach-dir-825-c1.c ar71xx: fixes whitespaces for dir-825-c1 2013-02-02 15:02:19 +00:00
mach-eap7660d.c ar71xx: add ALL0305 board alias 2012-08-22 12:33:22 +00:00
mach-ew-dorin.c ar71xx: ew-dorin: added router firmware generation 2012-08-01 12:24:57 +00:00
mach-hornet-ub.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-ja76pf.c
mach-jwap003.c
mach-mr600.c ar71xx: fix mac address calculation on the OpenMesh MR600 2013-02-02 08:47:41 +00:00
mach-mzk-w04nu.c
mach-mzk-w300nh.c
mach-nbg460n.c
mach-om2p.c ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines 2012-10-17 18:27:47 +00:00
mach-pb42.c
mach-pb92.c
mach-rb4xx.c ar71xx: register the micro sd card reader on RB493G 2013-02-10 12:31:38 +00:00
mach-rb95x.c ar71xx: add kernel support for the Mikrotik RB951G board 2013-02-17 10:08:35 +00:00
mach-rb750.c ar71xx: Routerboard 751 Mac Address Offset Fix 2013-02-08 09:34:53 +00:00
mach-rb2011.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-rw2458n.c ar71xx: rw2458n - fix flash parts 2012-10-19 18:32:49 +00:00
mach-tew-632brp.c
mach-tew-673gru.c ar71xx: automatically find WLAN calibration data on TEW-673GRU 2012-09-25 12:57:40 +00:00
mach-tew-712br.c ar71xx: add support for the TRENDnet TEW-712BR board 2012-08-22 20:09:13 +00:00
mach-tl-mr3x20.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-tl-mr11u.c ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 2013-01-07 14:30:37 +00:00
mach-tl-mr3020.c ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 2013-01-07 14:30:37 +00:00
mach-tl-wa901nd-v2.c
mach-tl-wa901nd.c ar71xx: add support for TP-Link TL-WA7510N 2012-11-13 14:48:00 +00:00
mach-tl-wdr3500.c ar71xx: add kernel support for the TL-WDR3500 board 2013-02-01 15:50:29 +00:00
mach-tl-wdr4300.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-tl-wr703n.c ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 2013-01-07 14:30:37 +00:00
mach-tl-wr741nd-v4.c ar71xx: add kernel support for the TL-MR3220 v2 2012-12-19 08:50:35 +00:00
mach-tl-wr741nd.c
mach-tl-wr841n-v8.c ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines 2012-10-17 18:27:47 +00:00
mach-tl-wr841n.c
mach-tl-wr941nd.c
mach-tl-wr1041n-v2.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-tl-wr1043nd.c ar71xx: init switch hw_reset on the TL-WR1043ND board 2012-08-02 09:54:28 +00:00
mach-tl-wr2543n.c ar71xx: fix comment style in mach-tl-wr2543n.c 2012-08-22 12:42:59 +00:00
mach-ubnt.c
mach-whr-hp-g300n.c
mach-wlae-ag300n.c ar71xx: Buffalo WLAE-AG300N initial support 2012-08-01 12:24:52 +00:00
mach-wndr3700.c
mach-wndr4300.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-wnr2000.c
mach-wp543.c
mach-wpe72.c
mach-wrt160nl.c
mach-wrt400n.c
mach-wzr-hp-ag300h.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-wzr-hp-g300nh.c
mach-wzr-hp-g300nh2.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-wzr-hp-g450h.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-zcn-1523h.c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 2012-11-04 22:08:54 +00:00
nvram.c
nvram.h
pci-ath9k-fixup.c ar71xx: remove superfluous include of asm/mach-ath79/pci.h 2012-06-19 10:13:43 +00:00
pci-ath9k-fixup.h
routerboot.c ar71xx: add RouterBoot related helper routines 2012-09-09 14:05:28 +00:00
routerboot.h ar71xx: add RouterBoot related helper routines 2012-09-09 14:05:28 +00:00