openwrt-owl/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hssp...

69 lines
2.2 KiB
Diff

From 61dc388f577b6f984797949f32c30021d9ea73dc Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 23 Aug 2015 12:16:02 +0200
Subject: [PATCH V2] spi/bcm63xx-hsspi: add support for dual spi read/write
Add support for dual read/writes on spi-bcm63xx-hsspi. This has been
tested with a s25fl129p1 dual read capable spi flash, with a nice speed
improvement:
serial read:
root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192
2032+0 records in
2032+0 records out
real 0m 4.39s
user 0m 0.00s
sys 0m 1.55s
dual read:
root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192
2032+0 records in
2032+0 records out
real 0m 3.09s
user 0m 0.00s
sys 0m 1.56s
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
drivers/spi/spi-bcm63xx-hsspi.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -76,6 +76,7 @@
#define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200)
+#define HSSPI_OP_MULTIBIT BIT(11)
#define HSSPI_OP_CODE_SHIFT 13
#define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT)
#define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT)
@@ -171,9 +172,12 @@ static int bcm63xx_hsspi_do_txrx(struct
if (opcode != HSSPI_OP_READ)
step_size -= HSSPI_OPCODE_LEN;
- __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
- 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
- 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
+ if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) ||
+ (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL))
+ opcode |= HSSPI_OP_MULTIBIT;
+
+ __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT |
+ 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff,
bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
while (pending > 0) {
@@ -374,7 +378,8 @@ static int bcm63xx_hsspi_probe(struct pl
master->num_chipselect = 8;
master->setup = bcm63xx_hsspi_setup;
master->transfer_one_message = bcm63xx_hsspi_transfer_one;
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH |
+ SPI_RX_DUAL | SPI_TX_DUAL;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->auto_runtime_pm = true;