openwrt-owl/target/linux/generic/patches-3.14/048-mtd-bcm47xxpart-backpor...

60 lines
1.8 KiB
Diff

--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -150,7 +150,7 @@ config MTD_BCM63XX_PARTS
config MTD_BCM47XX_PARTS
tristate "BCM47XX partitioning support"
- depends on BCM47XX
+ depends on BCM47XX || ARCH_BCM_5301X
help
This provides partitions parser for devices based on BCM47xx
boards.
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -14,7 +14,6 @@
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <bcm47xx_nvram.h>
/* 10 parts were found on sflash on Netgear WNDR4500 */
#define BCM47XXPART_MAX_PARTS 12
@@ -30,6 +29,7 @@
#define BOARD_DATA_MAGIC2 0xBD0D0BBD
#define CFE_MAGIC 0x43464531 /* 1EFC */
#define FACTORY_MAGIC 0x59544346 /* FCTY */
+#define NVRAM_HEADER 0x48534C46 /* FLSH */
#define POT_MAGIC1 0x54544f50 /* POTT */
#define POT_MAGIC2 0x504f /* OP */
#define ML_MAGIC1 0x39685a42
@@ -91,7 +91,7 @@ static int bcm47xxpart_parse(struct mtd_
if (offset >= 0x2000000)
break;
- if (curr_part > BCM47XXPART_MAX_PARTS) {
+ if (curr_part >= BCM47XXPART_MAX_PARTS) {
pr_warn("Reached maximum number of partitions, scanning stopped!\n");
break;
}
@@ -147,6 +147,11 @@ static int bcm47xxpart_parse(struct mtd_
/* TRX */
if (buf[0x000 / 4] == TRX_MAGIC) {
+ if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
+ pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
+ break;
+ }
+
trx = (struct trx_header *)buf;
trx_part = curr_part;
@@ -212,7 +217,7 @@ static int bcm47xxpart_parse(struct mtd_
/* Look for NVRAM at the end of the last block. */
for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
- if (curr_part > BCM47XXPART_MAX_PARTS) {
+ if (curr_part >= BCM47XXPART_MAX_PARTS) {
pr_warn("Reached maximum number of partitions, scanning stopped!\n");
break;
}