openwrt-owl

Go to file

Florian Fainelli 7328490dea add diag.sh to report boot status on the front-led of the machine SVN-Revision: 16233		2009-05-31 13:55:35 +00:00
docs	a couple of small fixes in the Wireless documentation	2009-05-22 13:45:22 +00:00
include	add dist and distcheck target (to create new source balls)	2009-05-31 12:01:05 +00:00
package	fix drivers firmware loading with the new hotplug2, patch from Russell Senior	2009-05-31 12:08:15 +00:00
scripts	deptest: use a separate build dir for host packages to prevent hardcoded path screwups	2009-05-28 23:49:13 +00:00
target	add diag.sh to report boot status on the front-led of the machine	2009-05-31 13:55:35 +00:00
toolchain	uClibc: bsd supports the same floating point classification functions as c99, fixes inetd	2009-05-29 10:32:17 +00:00
tools	fix download url	2009-05-31 10:07:35 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target	2009-03-18 15:57:18 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	feeds.conf.default: Change openwrt feeds urls from https to svn	2009-04-01 18:29:19 +00:00
rules.mk	Set TARGET_CXX to 'no' if c++ is not enabled in the toolchain.	2009-05-30 15:48:44 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org