mirror of https://github.com/hak5/openwrt-owl.git
360 lines
8.7 KiB
C
360 lines
8.7 KiB
C
/*
|
|
* NAND flash driver for the MikroTik RouterBOARD 750
|
|
*
|
|
* Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/mach-rb750.h>
|
|
|
|
#define DRV_NAME "rb750-nand"
|
|
#define DRV_VERSION "0.1.0"
|
|
#define DRV_DESC "NAND flash driver for the RouterBOARD 750"
|
|
|
|
#define RB750_NAND_IO0 BIT(RB750_GPIO_NAND_IO0)
|
|
#define RB750_NAND_ALE BIT(RB750_GPIO_NAND_ALE)
|
|
#define RB750_NAND_CLE BIT(RB750_GPIO_NAND_CLE)
|
|
#define RB750_NAND_NRE BIT(RB750_GPIO_NAND_NRE)
|
|
#define RB750_NAND_NWE BIT(RB750_GPIO_NAND_NWE)
|
|
#define RB750_NAND_RDY BIT(RB750_GPIO_NAND_RDY)
|
|
#define RB750_NAND_NCE BIT(RB750_GPIO_NAND_NCE)
|
|
|
|
#define RB750_NAND_DATA_SHIFT 1
|
|
#define RB750_NAND_DATA_BITS (0xff << RB750_NAND_DATA_SHIFT)
|
|
#define RB750_NAND_INPUT_BITS (RB750_NAND_DATA_BITS | RB750_NAND_RDY)
|
|
#define RB750_NAND_OUTPUT_BITS (RB750_NAND_ALE | RB750_NAND_CLE | \
|
|
RB750_NAND_NRE | RB750_NAND_NWE | \
|
|
RB750_NAND_NCE)
|
|
|
|
struct rb750_nand_info {
|
|
struct nand_chip chip;
|
|
struct mtd_info mtd;
|
|
};
|
|
|
|
/*
|
|
* We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
|
|
* will not be able to find the kernel that we load.
|
|
*/
|
|
static struct nand_ecclayout rb750_nand_ecclayout = {
|
|
.eccbytes = 6,
|
|
.eccpos = { 8, 9, 10, 13, 14, 15 },
|
|
.oobavail = 9,
|
|
.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
|
|
};
|
|
|
|
static struct mtd_partition rb750_nand_partitions[] = {
|
|
{
|
|
.name = "booter",
|
|
.offset = 0,
|
|
.size = (256 * 1024),
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "kernel",
|
|
.offset = (256 * 1024),
|
|
.size = (4 * 1024 * 1024) - (256 * 1024),
|
|
}, {
|
|
.name = "rootfs",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static void rb750_nand_write(const u8 *buf, unsigned len)
|
|
{
|
|
void __iomem *base = ath79_gpio_base;
|
|
u32 out;
|
|
u32 t;
|
|
unsigned i;
|
|
|
|
/* set data lines to output mode */
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
__raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
|
|
|
|
out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
|
out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
|
|
for (i = 0; i != len; i++) {
|
|
u32 data;
|
|
|
|
data = buf[i];
|
|
data <<= RB750_NAND_DATA_SHIFT;
|
|
data |= out;
|
|
__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
|
|
|
|
__raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT);
|
|
/* flush write */
|
|
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
|
}
|
|
|
|
/* set data lines to input mode */
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
__raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
|
|
/* flush write */
|
|
__raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
}
|
|
|
|
static int rb750_nand_read_verify(u8 *read_buf, unsigned len,
|
|
const u8 *verify_buf)
|
|
{
|
|
void __iomem *base = ath79_gpio_base;
|
|
unsigned i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
u8 data;
|
|
|
|
/* activate RE line */
|
|
__raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR);
|
|
/* flush write */
|
|
__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
|
|
|
|
/* read input lines */
|
|
data = __raw_readl(base + AR71XX_GPIO_REG_IN) >>
|
|
RB750_NAND_DATA_SHIFT;
|
|
|
|
/* deactivate RE line */
|
|
__raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET);
|
|
|
|
if (read_buf)
|
|
read_buf[i] = data;
|
|
else if (verify_buf && verify_buf[i] != data)
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
void __iomem *base = ath79_gpio_base;
|
|
u32 func;
|
|
u32 t;
|
|
|
|
func = __raw_readl(base + AR71XX_GPIO_REG_FUNC);
|
|
if (chip >= 0) {
|
|
/* disable latch */
|
|
rb750_latch_change(RB750_LVC573_LE, 0);
|
|
|
|
rb750_nand_pins_enable();
|
|
|
|
/* set input mode for data lines */
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
__raw_writel(t & ~RB750_NAND_INPUT_BITS,
|
|
base + AR71XX_GPIO_REG_OE);
|
|
|
|
/* deactivate RE and WE lines */
|
|
__raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
|
|
base + AR71XX_GPIO_REG_SET);
|
|
/* flush write */
|
|
(void) __raw_readl(base + AR71XX_GPIO_REG_SET);
|
|
|
|
/* activate CE line */
|
|
__raw_writel(RB750_NAND_NCE, base + AR71XX_GPIO_REG_CLEAR);
|
|
} else {
|
|
/* deactivate CE line */
|
|
__raw_writel(RB750_NAND_NCE, base + AR71XX_GPIO_REG_SET);
|
|
/* flush write */
|
|
(void) __raw_readl(base + AR71XX_GPIO_REG_SET);
|
|
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
__raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY,
|
|
base + AR71XX_GPIO_REG_OE);
|
|
|
|
rb750_nand_pins_disable();
|
|
|
|
/* enable latch */
|
|
rb750_latch_change(0, RB750_LVC573_LE);
|
|
}
|
|
}
|
|
|
|
static int rb750_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
void __iomem *base = ath79_gpio_base;
|
|
|
|
return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY);
|
|
}
|
|
|
|
static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
void __iomem *base = ath79_gpio_base;
|
|
u32 t;
|
|
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
|
|
|
t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
|
|
t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
|
|
t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
|
|
|
|
__raw_writel(t, base + AR71XX_GPIO_REG_OUT);
|
|
/* flush write */
|
|
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
|
}
|
|
|
|
if (cmd != NAND_CMD_NONE) {
|
|
u8 t = cmd;
|
|
rb750_nand_write(&t, 1);
|
|
}
|
|
}
|
|
|
|
static u8 rb750_nand_read_byte(struct mtd_info *mtd)
|
|
{
|
|
u8 data = 0;
|
|
rb750_nand_read_verify(&data, 1, NULL);
|
|
return data;
|
|
}
|
|
|
|
static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
|
|
{
|
|
rb750_nand_read_verify(buf, len, NULL);
|
|
}
|
|
|
|
static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
|
|
{
|
|
rb750_nand_write(buf, len);
|
|
}
|
|
|
|
static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len)
|
|
{
|
|
return rb750_nand_read_verify(NULL, len, buf);
|
|
}
|
|
|
|
static void __init rb750_nand_gpio_init(void)
|
|
{
|
|
void __iomem *base = ath79_gpio_base;
|
|
u32 out;
|
|
u32 t;
|
|
|
|
out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
|
|
|
/* setup output levels */
|
|
__raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
|
|
base + AR71XX_GPIO_REG_SET);
|
|
|
|
__raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
|
|
base + AR71XX_GPIO_REG_CLEAR);
|
|
|
|
/* setup input lines */
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
__raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE);
|
|
|
|
/* setup output lines */
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
__raw_writel(t | RB750_NAND_OUTPUT_BITS, base + AR71XX_GPIO_REG_OE);
|
|
|
|
rb750_latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
|
|
}
|
|
|
|
static int __devinit rb750_nand_probe(struct platform_device *pdev)
|
|
{
|
|
struct rb750_nand_info *info;
|
|
int ret;
|
|
|
|
printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
|
|
|
|
rb750_nand_gpio_init();
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
info->chip.priv = &info;
|
|
info->mtd.priv = &info->chip;
|
|
info->mtd.owner = THIS_MODULE;
|
|
|
|
info->chip.select_chip = rb750_nand_select_chip;
|
|
info->chip.cmd_ctrl = rb750_nand_cmd_ctrl;
|
|
info->chip.dev_ready = rb750_nand_dev_ready;
|
|
info->chip.read_byte = rb750_nand_read_byte;
|
|
info->chip.write_buf = rb750_nand_write_buf;
|
|
info->chip.read_buf = rb750_nand_read_buf;
|
|
info->chip.verify_buf = rb750_nand_verify_buf;
|
|
|
|
info->chip.chip_delay = 25;
|
|
info->chip.ecc.mode = NAND_ECC_SOFT;
|
|
info->chip.options |= NAND_NO_AUTOINCR;
|
|
|
|
platform_set_drvdata(pdev, info);
|
|
|
|
ret = nand_scan_ident(&info->mtd, 1, NULL);
|
|
if (ret) {
|
|
ret = -ENXIO;
|
|
goto err_free_info;
|
|
}
|
|
|
|
if (info->mtd.writesize == 512)
|
|
info->chip.ecc.layout = &rb750_nand_ecclayout;
|
|
|
|
ret = nand_scan_tail(&info->mtd);
|
|
if (ret) {
|
|
return -ENXIO;
|
|
goto err_set_drvdata;
|
|
}
|
|
|
|
ret = mtd_device_register(&info->mtd, rb750_nand_partitions,
|
|
ARRAY_SIZE(rb750_nand_partitions));
|
|
if (ret)
|
|
goto err_release_nand;
|
|
|
|
return 0;
|
|
|
|
err_release_nand:
|
|
nand_release(&info->mtd);
|
|
err_set_drvdata:
|
|
platform_set_drvdata(pdev, NULL);
|
|
err_free_info:
|
|
kfree(info);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit rb750_nand_remove(struct platform_device *pdev)
|
|
{
|
|
struct rb750_nand_info *info = platform_get_drvdata(pdev);
|
|
|
|
nand_release(&info->mtd);
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver rb750_nand_driver = {
|
|
.probe = rb750_nand_probe,
|
|
.remove = __devexit_p(rb750_nand_remove),
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init rb750_nand_init(void)
|
|
{
|
|
return platform_driver_register(&rb750_nand_driver);
|
|
}
|
|
|
|
static void __exit rb750_nand_exit(void)
|
|
{
|
|
platform_driver_unregister(&rb750_nand_driver);
|
|
}
|
|
|
|
module_init(rb750_nand_init);
|
|
module_exit(rb750_nand_exit);
|
|
|
|
MODULE_DESCRIPTION(DRV_DESC);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
|
|
MODULE_LICENSE("GPL v2");
|