openwrt-owl

Go to file

John Crispin 6ca6a98622 ramips: Remove LED GPIO definitions in MQmaker WiTi device tree LED's were defined wrong in the device tree file, they are hardware driven because they are connected directly to the switch chip and wireless chips respectively, thus no GPIO addresses are assigned to them. It is safe to remove them from the device tree file to stop confusion. Signed-off-by: Sebastian Careba <nitroshift@yahoo.com> SVN-Revision: 48055		2016-01-01 21:20:54 +00:00
config	kernel: add support for KERNEL_CGROUP_PIDS	2015-10-26 11:54:56 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	image.mk: use cross toolchain cpp for processing dts file instead of relying on the host compiler	2015-12-19 11:15:41 +00:00
package	ltq-vdsl-app: re-add lowlevel settings	2016-01-01 21:20:24 +00:00
scripts	scripts/download.pl: cleanup GNOME source location definitions	2015-12-10 12:40:08 +00:00
target	ramips: Remove LED GPIO definitions in MQmaker WiTi device tree	2016-01-01 21:20:54 +00:00
toolchain	gcc: remove v4.6 relicts	2015-12-23 11:23:19 +00:00
tools	tools/e2fsprogs: remove outdated configure args	2015-12-23 14:44:18 +00:00
.gitattributes	…
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	…
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
LICENSE	…
Makefile	Makefile: move the cleaning of staging_dir/target* from dirclean to clean	2015-06-14 17:47:16 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
rules.mk	gcc: remove version 4.6, it is no longer needed	2015-11-10 21:10:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org