..
6in4
6in4, 6to4: further simplify protocol backends - use new default route dependencies to trigger bringup - remove old hotplug scripts
2012-06-18 21:40:34 +00:00
6rd
6rd: missing config option `ipaddr`.
2012-08-11 00:25:23 +00:00
6to4
6to4: properly setup Base6to4Interface ( #12251 )
2012-09-27 18:30:07 +00:00
acx-mac80211
acx-mac80211: adapt interface changes in mac80211
2012-10-04 21:39:22 +00:00
admswconfig
admswconfig: reset interface after applying config
2011-01-27 21:49:50 +00:00
apex
only support EABI on ARM targets
2011-03-07 12:59:19 +00:00
ar7-atm
package/ar7-atm: allow to build on 3.3
2012-05-05 17:32:33 +00:00
arptables
fix breakage when compiling for armv6
2012-08-14 10:13:39 +00:00
avila-wdt
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
2010-07-12 14:06:13 +00:00
base-files
it's time to break the barriers
2012-10-08 13:12:37 +00:00
block-mount
block-mount: additionally try to umount disk by mountpoint ( #12056 )
2012-09-10 09:48:31 +00:00
brcm2708-gpu-fw
adds target used by rapsberry pi
2012-07-24 20:39:17 +00:00
broadcom-diag
get rid of the IRQF_SAMPLE_RANDOM flag
2012-09-26 12:53:58 +00:00
broadcom-wl
broadcom-wl: fix build after IRQF_SAMPLE_RANDOM flag removal ( #12248 )
2012-10-04 12:36:45 +00:00
busybox
busybox: backport upstream fixes for ext2 related tools
2012-10-08 12:31:33 +00:00
button-hotplug
kernel: remove kernel modules and references to kernels <= 2.6.36
2012-05-06 20:43:17 +00:00
comgt
comgt: perform case insensitive match when probing for Huawei devices ( #12039 )
2012-09-22 14:55:17 +00:00
compcache
fixes build for 3.x kernel and remove old 2.6.x references
2012-07-24 23:07:35 +00:00
dnsmasq
dnsmasq: enable parallel builds
2012-09-15 11:36:58 +00:00
dropbear
build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems
2012-09-23 09:50:01 +00:00
e2fsprogs
e2fsprogs: drop an unnecessary include that breaks on mac os x
2012-09-22 23:34:54 +00:00
ead
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
ebtables
ebtables: add a missing dependency
2012-06-11 00:56:34 +00:00
ep80579-drivers
x86/ep80579: switch to 3.3
2012-05-18 20:10:33 +00:00
fbtest
fbtest utility
2012-02-08 10:20:13 +00:00
fconfig
…
firewall
firewall: also set up nat reflection rules for redirects with proto all and/or no src_dport set
2012-07-09 12:23:36 +00:00
fuse
fuse: remove now redundant dependency on +USE_EGLIBC:librt
2012-09-19 15:37:35 +00:00
gdb
build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems
2012-09-23 09:50:01 +00:00
gpio-button-hotplug
kernel: remove kernel modules and references to kernels <= 2.6.36
2012-05-06 20:43:17 +00:00
gpioctl
…
grub2
grub2: use the static lzma lib instead of the dynamic one
2012-09-23 10:38:06 +00:00
hostap-driver
wpa_supplicant: use wext driver for hostap and madwifi
2012-03-27 10:44:26 +00:00
hostap-utils
…
hostapd
hostapd: ensure that wpa_supplicant_setup_vif() returns success in cases where wpa_supplicant is not invoked ( #11996 )
2012-10-09 16:41:28 +00:00
hotplug2
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
i2c-gpio-custom
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
2010-07-12 14:06:13 +00:00
ifenslave
…
iproute2
build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems
2012-09-23 09:50:01 +00:00
iptables
iptables: fix build error if only libraries are selected
2012-06-07 12:24:37 +00:00
iw
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
iwcap
iwcap: fix reversed umask
2012-02-27 23:08:15 +00:00
iwinfo
iwinfo: add hwinfo of AR9280 2T2R PCIe
2012-08-29 10:37:49 +00:00
ixp4xx-microcode
…
kernel
fix xen pci module, partially fixes #11970
2012-08-05 08:16:50 +00:00
kexec-tools
kexec-tools: update to 2.0.3 ( fixes #9846 )
2012-02-13 12:36:36 +00:00
libs
cyassl: add a patch to better check legacy SSLv2 client hello records
2012-10-09 16:41:36 +00:00
linux-atm
build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems
2012-09-23 09:50:01 +00:00
ltq-dsl
lantiq: dsl: fix status polling loop
2012-08-22 09:19:11 +00:00
ltq-dsl-app
remove dependency for pkill
2012-09-28 22:37:04 +00:00
ltq-ifxos
wrong md5sum in ltq-ifxos
2011-07-10 10:40:37 +00:00
ltq-kpi2udp
* adss in-kernel udp redirect plugin for lantiq voice optimisation
2011-02-07 21:48:55 +00:00
ltq-tapi
unify tapi deps
2012-08-13 11:08:13 +00:00
ltq-tapidemo
unify tapi deps
2012-08-13 11:08:13 +00:00
ltq-vmmc
unify tapi deps
2012-08-13 11:08:13 +00:00
lua
lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
2011-05-04 14:51:06 +00:00
mac80211
mac80211: brcmsmac: use firmware extracted from proprietary driver
2012-10-08 20:18:27 +00:00
maccalc
package/maccalc: don't expect to get all data in one read
2011-09-21 11:47:35 +00:00
mkelfimage
move mkelfimage from tools/ to package/ as it needs a proper i386 toolchain - make the package hidden so that it is automatically built without having to be selected
2011-07-02 06:49:36 +00:00
mmc_over_gpio
mmc_over_gpio: mark /etc/config/mmc_over_gpio as conffile
2010-10-05 17:21:03 +00:00
mountd
mountd: add "-f" option to not daemonize mountd, use service wrappers in init script
2012-09-12 10:09:55 +00:00
mtd
package: mtd: use in-kernel bcm63xx image tag header
2012-10-08 09:59:47 +00:00
netifd
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
nvram
add maintainer information
2010-09-30 10:48:37 +00:00
om-watchdog
package/om-watchdog: start service only on the om2p/om2p-lc boards on ar71xx
2012-08-15 13:27:55 +00:00
opkg
build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems
2012-09-23 09:50:01 +00:00
owipcalc
owipcalc: fix output formatting quirks
2012-07-20 15:05:30 +00:00
owsip
unify tapi deps
2012-08-13 11:08:13 +00:00
pjsip
build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems
2012-09-23 09:50:01 +00:00
ppp
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
px5g
add maintainer information
2010-09-30 10:48:37 +00:00
qos-scripts
/etc/functions.sh => /lib/functions.sh
2012-06-05 16:04:23 +00:00
rbcfg
package/rbcfg: new tool for modifying boot configuration on the RB4xx boards
2011-06-29 09:40:54 +00:00
relayd
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
resolveip
resolveip: fix whitespace
2011-07-17 22:47:56 +00:00
robocfg
…
rotary-gpio-custom
Add package rotary-gpio-custom
2010-07-22 11:32:27 +00:00
rssileds
rssileds: select libiwinfo instead of just depending on it
2012-10-08 13:01:47 +00:00
rtc-rv5c386a
rtc-rv5c386a: add support for kernel 3.0
2011-08-04 20:06:17 +00:00
sierra-directip
kernel: remove kernel modules and references to kernels <= 2.6.36
2012-05-06 20:43:17 +00:00
soloscli
soloscli: Add script to syslog ADSL line stats
2012-03-29 09:01:33 +00:00
spi-ks8995
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
2010-07-12 14:06:13 +00:00
spidev_test
…
swconfig
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
switch
switch: warn if ndo_do_ioctl is not implemented in the Ethernet driver
2012-09-22 12:29:23 +00:00
toolchain
toolchain: fix libgcc and libgfortran packages for avr32 and coldfire
2012-07-17 17:33:13 +00:00
trelay
kernel: remove kernel modules and references to kernels <= 2.6.36
2012-05-06 20:43:17 +00:00
uboot-ar71xx
uboot-ar71xx: fix compile on recent mac os x versions
2012-07-16 16:26:51 +00:00
uboot-envtools
uboot-envtools: remove MENU, it is unused since r33265
2012-10-03 18:57:51 +00:00
uboot-kirkwood
uboot-kirkwood: update to 2012.04.01
2012-07-14 23:54:20 +00:00
uboot-lantiq
adds ARV4519PW/ARV7519PW
2012-03-25 08:51:13 +00:00
uboot-omap4
add support for OMAP4 based boards, starting with the PandaBoard
2012-01-14 23:02:56 +00:00
uboot-omap35xx
Change u-boot console device to reflect change in omap serial driver
2011-08-19 12:01:30 +00:00
uboot-pxa
add uboot-pxa for Gumstix boards
2012-10-03 16:14:21 +00:00
uboot-xburst
uboot-{kirkwood,xburst}: Fix typo in U-Boot image name, thanks framer99 ( #8112 )
2010-10-21 08:54:36 +00:00
ubus
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
uci
add myself as a maintainer for various packages
2012-10-08 11:41:02 +00:00
udev
udev: Provide define to enable compilation with kernel 2.6.32.33 headers
2011-10-14 11:42:40 +00:00
uhttpd
uhttpd: various changes
2012-07-13 17:10:56 +00:00
usbreset
usbreset: improve usability - add device list in usage screen - support resetting by bus/device number, by produc:vendor id or by device name
2012-07-16 00:39:39 +00:00
util-linux
package/util-linux: don't lie about availability of '%ms' scanf modifier
2012-08-24 10:01:01 +00:00
vsc73x5-ucode
…
w1-gpio-custom
w1-gpio-custom: set enable_external_pullup to null ( #8952 )
2012-08-07 16:08:08 +00:00
wireless-tools
Increase iwlist buffer size
2012-07-19 08:36:11 +00:00
wrt55agv2-spidevs
wrt55agv2-spidevs needs <linux/modules.h>
2012-08-03 09:38:24 +00:00
xfsprogs
xfsprogs: disable po files building
2012-04-20 13:25:08 +00:00
yamonenv
…
Makefile
build: rework the package/install step - collect package install lists during package/compile, then install all packages at once
2012-10-06 16:01:06 +00:00