openwrt-owl

Go to file

Michael Büsch 693bc17d40 Load MUSB before gadget and host drivers are loaded SVN-Revision: 25903		2011-03-06 21:36:02 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	cmake: Fix ccache	2011-03-05 10:36:52 +00:00
package	Load MUSB before gadget and host drivers are loaded	2011-03-06 21:36:02 +00:00
scripts	base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs	2011-03-01 05:40:38 +00:00
target	omap24xx: Update kconfig	2011-03-06 17:34:07 +00:00
toolchain	toolchain/gcc (linaro): fix extension elimination optimization	2011-03-04 21:38:15 +00:00
tools	bison: fix compilation with stub intl header	2011-03-04 20:37:15 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	fix wrong copy&paste in the helptext for kernel AIO support	2011-02-27 20:06:05 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	add an abstract $(LIBRPC_DEPENDS) variable for feed packages to rely on	2011-03-03 01:45:36 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org