| .. |
|
dev-ap9x-pci.c
|
ar71xx: add ap91_pci_init_simple helper
|
2012-12-12 16:49:48 +00:00 |
|
dev-ap9x-pci.h
|
ar71xx: add ap91_pci_init_simple helper
|
2012-12-12 16:49:48 +00:00 |
|
dev-dsa.c
|
…
|
|
|
dev-dsa.h
|
…
|
|
|
dev-eth.c
|
ar71xx: dev-eth: replace mdelay calls
|
2014-12-07 16:53:15 +00:00 |
|
dev-eth.h
|
ar71xx: add a helper function for setting up ETH_CFG register on QCA955x
|
2014-07-13 19:43:56 +00:00 |
|
dev-m25p80.c
|
ar71xx: enable fast flash read on dual-flash devices
|
2013-01-29 19:12:25 +00:00 |
|
dev-m25p80.h
|
…
|
|
|
dev-nfc.c
|
ar71xx: ar934x_nfc: fix memory initialization bug
|
2014-03-12 12:52:36 +00:00 |
|
dev-nfc.h
|
ar71xx: add ath79_nfc_set_ecc_mode helper
|
2013-09-19 18:43:42 +00:00 |
|
mach-alfa-ap96.c
|
ar71xx: add linux 3.14 support
|
2014-08-07 12:40:53 +00:00 |
|
mach-alfa-nx.c
|
ar71xx: remove the built-in MTD maps of several boards
|
2012-03-27 19:38:01 +00:00 |
|
mach-all0258n.c
|
ar71xx: remove the built-in MTD map of the ALL0258N
|
2012-07-03 15:24:01 +00:00 |
|
mach-all0315n.c
|
ar71xx: all0315n: fix ethernet according to vendor info
|
2012-08-29 10:37:54 +00:00 |
|
mach-ap83.c
|
…
|
|
|
mach-ap96.c
|
ar71xx: remove the built-in MTD map of the AP96 board
|
2012-03-27 19:38:07 +00:00 |
|
mach-ap113.c
|
ar71xx: remove the built-in MTD maps of several boards
|
2012-03-27 19:38:01 +00:00 |
|
mach-ap132.c
|
ar71xx: add kernel support for Atheros AP132 Reference Board
|
2013-01-29 19:12:30 +00:00 |
|
mach-archer-c7.c
|
add support for the archer c5
|
2014-07-23 12:47:25 +00:00 |
|
mach-aw-nr580.c
|
…
|
|
|
mach-bhu-bxu2000n2-a.c
|
ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board
|
2013-10-30 06:50:57 +00:00 |
|
mach-cap4200ag.c
|
ar71xx: add support for the Senao CAP4200AG board
|
2012-10-27 08:55:38 +00:00 |
|
mach-carambola2.c
|
ar71xx: update Carambola2 platform data
|
2014-08-04 14:46:52 +00:00 |
|
mach-cpe510.c
|
ar71xx: add support for TP-LINK CPE210/220/510/520
|
2014-11-26 08:59:32 +00:00 |
|
mach-dgl-5500-a1.c
|
add D-link DGL-5500 A1 support
|
2014-11-27 14:27:34 +00:00 |
|
mach-dhp-1565-a1.c
|
ar71xx: Added support for D-link DHP-1565 rev. A1
|
2014-11-19 09:20:47 +00:00 |
|
mach-dir-505-a1.c
|
ar71xx: dir-505-a1: use ath79_parse_ascii_mac helper
|
2013-09-20 16:41:31 +00:00 |
|
mach-dir-600-a1.c
|
ar71xx: add support for dlink dir-615-e1
|
2014-06-02 14:43:35 +00:00 |
|
mach-dir-615-c1.c
|
ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address
|
2015-01-28 19:19:47 +00:00 |
|
mach-dir-825-b1.c
|
ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper
|
2013-09-20 16:41:32 +00:00 |
|
mach-dir-825-c1.c
|
ar71xx: fix WLAN 5 GHz LED init on dir-825-c1
|
2013-10-20 15:59:04 +00:00 |
|
mach-dragino2.c
|
ar71xx: Fix LED definitions for the DRAGINO2 board
|
2014-10-14 10:33:07 +00:00 |
|
mach-eap300v2.c
|
ar71xx: add kernel support for the EnGenius EAP300 v2 board
|
2014-07-14 21:30:26 +00:00 |
|
mach-eap7660d.c
|
ar71xx: add ALL0305 board alias
|
2012-08-22 12:33:22 +00:00 |
|
mach-el-m150.c
|
ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
|
2014-11-14 16:58:29 +00:00 |
|
mach-el-mini.c
|
ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
|
2014-11-14 16:58:29 +00:00 |
|
mach-esr900.c
|
ar71xx: use ETH_ALEN for consistency
|
2014-08-25 06:35:58 +00:00 |
|
mach-esr1750.c
|
ar71xx: add kernel support for EnGenius ESR1750
|
2014-07-13 19:43:57 +00:00 |
|
mach-ew-dorin.c
|
ar71xx: ew-dorin: added router firmware generation
|
2012-08-01 12:24:57 +00:00 |
|
mach-f9k1115v2.c
|
Belkin AC 1750 DB (F9K1115v2) support
|
2014-12-17 08:27:38 +00:00 |
|
mach-gl-inet.c
|
ar71xx: Fix GL.iNet WLAN LED
|
2014-07-21 19:26:46 +00:00 |
|
mach-gs-oolite.c
|
ar71xx: oolite: the buttons are not active_low
|
2014-08-01 11:19:34 +00:00 |
|
mach-hiwifi-hc6361.c
|
ar71xx: add kernel support for HiWiFi HC6361.
|
2014-06-02 14:56:24 +00:00 |
|
mach-hornet-ub.c
|
ar71xx: fix ALFA NETWORK's name
|
2014-07-14 11:10:00 +00:00 |
|
mach-ja76pf.c
|
ar71xx: add support for the jjPlus JA76PF2 board
|
2012-03-16 18:00:34 +00:00 |
|
mach-jwap003.c
|
…
|
|
|
mach-mr600.c
|
ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board
|
2014-08-18 13:09:14 +00:00 |
|
mach-mr900.c
|
ar71xx: add kernel support for the OpenMesh MR900v2
|
2014-11-14 16:54:58 +00:00 |
|
mach-mynet-n600.c
|
ar71xx: my net n600: simplify LNA GPIO setup
|
2014-01-10 09:37:58 +00:00 |
|
mach-mynet-n750.c
|
ar71xx: mynet-n750: define LEDs connected to the AR8327 switch
|
2014-01-21 17:17:42 +00:00 |
|
mach-mynet-rext.c
|
ar71xx: improve support for the My Net Wi-Fi Range Extender device
|
2013-11-29 20:18:44 +00:00 |
|
mach-mzk-w04nu.c
|
…
|
|
|
mach-mzk-w300nh.c
|
…
|
|
|
mach-nbg460n.c
|
ar71xx: remove __dev{init,exit} annotations from kernel files
|
2013-02-19 20:52:06 +00:00 |
|
mach-nbg6716.c
|
ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards
|
2014-07-13 19:44:00 +00:00 |
|
mach-om2p.c
|
ar71xx: fix reset button gpio for OM2P/OM2P-HS
|
2014-10-06 04:51:51 +00:00 |
|
mach-om5p.c
|
ar71xx: add kernel support for the OpenMesh OM5P board
|
2014-07-20 17:30:32 +00:00 |
|
mach-pb42.c
|
…
|
|
|
mach-pb92.c
|
ar71xx: remove the built-in MTD map of the PB92 board
|
2012-03-27 19:38:05 +00:00 |
|
mach-qihoo-c301.c
|
ar71xx: qihoo: define flash variable as static
|
2015-02-07 19:59:02 +00:00 |
|
mach-r6100.c
|
Netgear R6100 support
|
2014-11-26 08:28:22 +00:00 |
|
mach-rb4xx.c
|
ar71xx: register the micro sd card reader on RB493G
|
2013-02-10 12:31:38 +00:00 |
|
mach-rb91x.c
|
ar71xx: rb91x: fix ethernet packet loss issues
|
2014-04-13 20:41:52 +00:00 |
|
mach-rb95x.c
|
ar71xx: rb95x: use correct SPI flash address
|
2014-03-12 12:52:39 +00:00 |
|
mach-rb750.c
|
ar71xx: Routerboard 751 Mac Address Offset Fix
|
2013-02-08 09:34:53 +00:00 |
|
mach-rb2011.c
|
ar71xx: rb2011: define LEDs connected to the AR8327 switch
|
2014-01-20 10:23:01 +00:00 |
|
mach-rbsxtlite.c
|
ar71xx: Add support for MikroTik RouterBOARD SXT Lite
|
2014-07-01 13:38:30 +00:00 |
|
mach-rw2458n.c
|
ar71xx: rw2458n - Use eeprom (art) from wifi card
|
2013-03-15 14:35:50 +00:00 |
|
mach-smart-300.c
|
add support for the NC-LINK SMART-300
|
2014-08-11 11:44:51 +00:00 |
|
mach-tew-632brp.c
|
ar71xx: TEW632BRP has buttons 'active low', fix board config
|
2013-07-28 10:23:22 +00:00 |
|
mach-tew-673gru.c
|
ar71xx: tew-673gru: use ath79_parse_ascii_mac helper
|
2013-09-20 16:41:34 +00:00 |
|
mach-tew-712br.c
|
ar71xx: tew-712br: use ath79_parse_ascii_mac helper
|
2013-09-20 16:41:36 +00:00 |
|
mach-tew-732br.c
|
ar71xx: add kernel support for the TEW-732BR board
|
2013-09-23 09:49:01 +00:00 |
|
mach-tl-mr3x20.c
|
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
|
2012-11-05 13:23:27 +00:00 |
|
mach-tl-mr11u.c
|
ar71xx: improve kernel support for the TL-MR3040 v2
|
2013-09-25 18:42:10 +00:00 |
|
mach-tl-mr13u.c
|
ar71xx: add kernel support for TP-Link TL-MR13U
|
2013-09-19 17:52:41 +00:00 |
|
mach-tl-mr3020.c
|
ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
|
2013-01-07 14:30:37 +00:00 |
|
mach-tl-wa701nd-v2.c
|
ar71xx: add support for TL-WA701ND v2
|
2015-01-20 15:48:07 +00:00 |
|
mach-tl-wa830re-v2.c
|
ar71xx: added support for TL-WA830RE V2
|
2014-07-13 07:12:22 +00:00 |
|
mach-tl-wa901nd-v2.c
|
…
|
|
|
mach-tl-wa901nd.c
|
ar71xx: fix tl-wa901nd buttons code
|
2013-08-05 09:09:39 +00:00 |
|
mach-tl-wax50re.c
|
ar71xx: add support for TP-LINK TL-WA860RE v1
|
2014-07-13 10:03:41 +00:00 |
|
mach-tl-wdr3500.c
|
ar71xx: fix ethernet LEDs on the TL-WDR3500
|
2013-03-25 06:40:03 +00:00 |
|
mach-tl-wdr4300.c
|
ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards
|
2014-01-24 17:40:17 +00:00 |
|
mach-tl-wr703n.c
|
ar71xx: fix typo in tl-wr710n mac setup (fixes #16469)
|
2014-05-24 08:01:33 +00:00 |
|
mach-tl-wr720n-v3.c
|
ar71xx: add kernel support for TPLINK WR720N v3
|
2013-04-26 17:00:48 +00:00 |
|
mach-tl-wr741nd-v4.c
|
ar71xx: add support for WIFI button on tp-link tl-mr3220v2
|
2013-06-04 13:25:54 +00:00 |
|
mach-tl-wr741nd.c
|
…
|
|
|
mach-tl-wr841n-v8.c
|
ar71xx: add support for the TP-LINK TL-WR941ND v5
|
2015-02-04 06:10:20 +00:00 |
|
mach-tl-wr841n-v9.c
|
ar71xx: add support for the TP-LINK TL-WR841N/ND v9
|
2014-04-07 08:00:02 +00:00 |
|
mach-tl-wr841n.c
|
…
|
|
|
mach-tl-wr941nd.c
|
…
|
|
|
mach-tl-wr1041n-v2.c
|
generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
|
2012-12-22 12:12:35 +00:00 |
|
mach-tl-wr1043nd-v2.c
|
wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILL
|
2014-10-14 19:01:21 +00:00 |
|
mach-tl-wr1043nd.c
|
ar71xx: init switch hw_reset on the TL-WR1043ND board
|
2012-08-02 09:54:28 +00:00 |
|
mach-tl-wr2543n.c
|
ar71xx: fix comment style in mach-tl-wr2543n.c
|
2012-08-22 12:42:59 +00:00 |
|
mach-tube2h.c
|
ar71xx: add kernel support for the Tube2H board
|
2014-07-14 16:03:34 +00:00 |
|
mach-ubnt.c
|
…
|
|
|
mach-whr-hp-g300n.c
|
ar71xx: remove the built-in MTD maps of several boards
|
2012-03-27 19:38:01 +00:00 |
|
mach-wlae-ag300n.c
|
ar71xx: Buffalo WLAE-AG300N initial support
|
2012-08-01 12:24:52 +00:00 |
|
mach-wlr8100.c
|
ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards
|
2014-07-13 19:44:00 +00:00 |
|
mach-wndap360.c
|
ar71xx: WNDAP360 adding wifi LED support
|
2014-06-02 15:02:54 +00:00 |
|
mach-wndr3700.c
|
ar71xx: use netgear prefix for WNDR3700 LED names
|
2013-09-21 15:55:50 +00:00 |
|
mach-wndr4300.c
|
ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines
|
2014-07-21 18:41:52 +00:00 |
|
mach-wnr2000-v3.c
|
ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)
|
2015-01-30 08:06:40 +00:00 |
|
mach-wnr2000-v4.c
|
ar71xx: add support for Netgear WNR2000v4
|
2014-11-03 20:20:56 +00:00 |
|
mach-wnr2000.c
|
ar71xx: use netgear prefix for WNR2000 LED names
|
2013-09-21 15:55:51 +00:00 |
|
mach-wnr2200.c
|
ar71xx: use netgear prefix for WNR2200 LED names
|
2013-09-21 15:55:52 +00:00 |
|
mach-wp543.c
|
ar71xx: wp543: set active_low flag for the buttons
|
2014-01-26 14:55:32 +00:00 |
|
mach-wpe72.c
|
ar71xx: wpe72: set active_low flag for the reset button
|
2014-01-26 14:55:34 +00:00 |
|
mach-wrt160nl.c
|
…
|
|
|
mach-wrt400n.c
|
…
|
|
|
mach-wzr-450hp2.c
|
ar71xx: add support for buffalo WZR-450HP2
|
2014-10-22 11:02:18 +00:00 |
|
mach-wzr-hp-ag300h.c
|
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
|
2013-07-14 14:05:27 +00:00 |
|
mach-wzr-hp-g300nh.c
|
ar71xx: use uimage split for WZR-HP-G300NH
|
2013-07-14 14:05:23 +00:00 |
|
mach-wzr-hp-g300nh2.c
|
ar71xx: use uimage split for WZR-HP-G300NH2
|
2013-07-14 14:05:31 +00:00 |
|
mach-wzr-hp-g450h.c
|
ath9k: merge initval and tx gain table updates, calibration fixes
|
2013-12-08 14:48:30 +00:00 |
|
mach-zcn-1523h.c
|
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
|
2012-11-04 22:08:54 +00:00 |
|
nvram.c
|
ar71xx: allow ath79_nvram_parse_mac_addr parsing mac with quotes
|
2014-07-13 19:43:54 +00:00 |
|
nvram.h
|
…
|
|
|
pci-ath9k-fixup.c
|
ar71xx: remove superfluous include of asm/mach-ath79/pci.h
|
2012-06-19 10:13:43 +00:00 |
|
pci-ath9k-fixup.h
|
…
|
|
|
routerboot.c
|
ar71xx: add some RouterBOOT specific helper functions
|
2013-12-16 10:11:01 +00:00 |
|
routerboot.h
|
ar71xx: add some RouterBOOT specific helper functions
|
2013-12-16 10:11:01 +00:00 |
8ca6c1acd4