hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
16,173 Commits
4 Branches
8 Tags
169 MiB
C 66.6%
Makefile 16.7%
Shell 8%
Roff 2.7%
Perl 2.1%
Other 3.8%
 
 
 
 
 
 
Go to file
Gabor Juhos 624cfc5c91 ramips: DMA map the correct RX skb size 
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24123
 		2010-11-24 10:01:16 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include use PREFIX/bin instead of PREFIX/sbin for all host builds (fixes e2fsprogs path) 2010-11-22 18:49:18 +00:00
package mac80211: improve station mode nullfunc probing 2010-11-23 02:13:54 +00:00
scripts switch from ext2 to ext4 (w/o) journaling 2010-11-22 12:12:39 +00:00
target ramips: DMA map the correct RX skb size 2010-11-24 10:01:16 +00:00
toolchain uClibc: add back a few cflags that were being overwritten, might fix a few segfauls (thx, framer99) 2010-11-24 00:30:26 +00:00
tools e2fsprogs: fix libuuid installation 2010-11-22 21:56:15 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in remove 2.6.25 support 2010-11-22 13:43:32 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
feeds.conf.default switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
rules.mk remove an obsolete comment for the flock template 2010-10-31 15:36:47 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org