Go to file
Gabor Juhos 60898bc0c5 disable INITRAMFS_EXTRA_FILES, in initramfs it cause errors
SVN-Revision: 9591
2007-11-23 14:58:55 +00:00
docs Allow specifying static IPv6 gateways (#2710) 2007-11-16 07:27:59 +00:00
include fix build issues that happen when the staging dir is cleared and the build directories stay 2007-11-20 22:43:38 +00:00
package update stripped subset of l7 patterns to 11-03-2007 patterns 2007-11-19 23:07:00 +00:00
scripts fix image names in arm-magic.sh (closes: #2682) 2007-11-11 13:37:37 +00:00
target disable INITRAMFS_EXTRA_FILES, in initramfs it cause errors 2007-11-23 14:58:55 +00:00
toolchain fix a few stampfile locations 2007-11-20 19:58:49 +00:00
tools fix some definitions in the ZyXEL tool 2007-11-03 17:00:57 +00:00
.gitignore add package/feeds to .gitignore 2007-10-13 02:05:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add external kernel tree support 2007-11-20 13:21:01 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile fix parallel build issues 2007-11-04 11:42:47 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
feeds.conf add initial version of a package feeds management script 2007-09-23 02:39:01 +00:00
rules.mk fix hostapd rebuild check, isolate the common src/ directory for hostapd variants as well to fix compile errors when both variants are selected (#2722) 2007-11-17 14:14:16 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org