openwrt-owl/target/linux/ramips
Roger Pueyo Centelles 5f6e948551 ramips: Add support for Wavlink WL-WN575A3
This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug
wireless router with the following specifications:

 - CPU: MediaTek MT7628AN 580MHz
 - Flash: 8MB
 - RAM: 64MB
 - Ethernet: 2x 10/100 Mbps (switched)
 - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm
 - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm
 - Antennas: 4x external (2 per radio), non-detachable
 - LEDs: 4 programmable + LAN, WAN, POWER
 - Buttons: reset, WPS

Flashing instructions:

Factory U-boot launches a TFTP client if WPS button is pressed during power-on.
Rename the sysupgrade file and configure a TFTP as follows:

 - Client (WL-WN575A3) IP: 192.168.10.101
 - Server IP: 192.168.10.100
 - Filename: firmware.bin

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2016-11-08 11:17:10 +01:00
..
base-files ramips: Add support for Wavlink WL-WN575A3 2016-11-08 11:17:10 +01:00
dts ramips: Add support for Wavlink WL-WN575A3 2016-11-08 11:17:10 +01:00
image ramips: Add support for Wavlink WL-WN575A3 2016-11-08 11:17:10 +01:00
mt7620 switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
mt7621 ramips: Add RTC driver to kernel for working hctosys 2016-10-31 16:41:26 +01:00
mt7628 switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
mt7688 switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
patches-4.4 kernel: update kernel 4.4 to version 4.4.30 2016-11-02 10:25:44 +01:00
rt288x ramips: fix the number of uarts for each SoC 2016-06-03 12:20:33 +02:00
rt305x switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
rt3883 ramips: enable 4K sector support in kernel config 2016-09-13 22:06:08 +02:00
Makefile build: fix subtarget descriptions 2016-09-04 13:35:11 +02:00
modules.mk ramips: Use MT7621 I2C driver for MT7628/MT7688 2016-11-03 08:27:20 +01:00