openwrt-owl

Go to file

Felix Fietkau 5dcaa510e8 add staging_dir/host/lib to LD_LIBRARY_PATH so that host-built applications can install and make use of shared libraries SVN-Revision: 14698		2009-02-28 21:03:06 +00:00
docs	allow mac80211 devices to be configured to do 802.11s, requires iw	2009-02-26 14:53:03 +00:00
include	add staging_dir/host/lib to LD_LIBRARY_PATH so that host-built applications can install and make use of shared libraries	2009-02-28 21:03:06 +00:00
package	ubsec: Fix bus disable ordering and fix probe error path.	2009-02-26 19:19:59 +00:00
scripts	add multiple download mirrors	2009-02-20 10:16:47 +00:00
target	add default network configuration for the RB-411 board	2009-02-28 18:55:46 +00:00
toolchain	upgrade the cross-gdb to 6.8 (patch from #4701 )	2009-02-28 21:02:49 +00:00
tools	firmware-utils: add new firmware generation tool for the TP-LINK TL-WR941ND device	2009-02-26 16:59:15 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add the possibility to put the rootfs to another location (usefull to specify one dedicated NFS export share regardless where in the compute farm the build is done)	2009-02-20 10:38:08 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	remove toolchain build directory as well in 'make dirclean'	2008-12-03 04:22:41 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Add desktop and xfce feed to feeds.conf.default	2009-01-19 19:46:03 +00:00
rules.mk	second part of target rootfs relocation	2009-02-20 10:44:19 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org