| .. |
|
001-spi-qup-Add-DMA-capabilities.patch
|
kernel: update 3.18 to 3.18.14
|
2015-05-21 19:32:46 +00:00 |
|
002-v3-spi-qup-Fix-incorrect-block-transfers.patch
|
…
|
|
|
003-spi-qup-Ensure-done-detection.patch
|
…
|
|
|
011-watchdog-qcom-use-timer-devicetree-binding.patch
|
kernel: update 3.18 to 3.18.14
|
2015-05-21 19:32:46 +00:00 |
|
012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch
|
kernel: update 3.18 to 3.18.14
|
2015-05-21 19:32:46 +00:00 |
|
013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch
|
…
|
|
|
020-add-ap148-bootargs.patch
|
ipq806x: move 020-add-ap148-bootargs.patch in patches-3.18
|
2015-04-01 08:31:52 +00:00 |
|
021-add-ap148-partitions.patch
|
ipq806x: switch AP148 to using SMEM based MTD parser
|
2015-08-17 06:18:15 +00:00 |
|
022-add-db149-dts.patch
|
ipq806x: replace caf nss-gmac driver by upstream stmmac
|
2015-05-29 12:26:01 +00:00 |
|
023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
|
ipq806x: disable i2c device on gsbi4
|
2015-05-23 15:27:45 +00:00 |
|
024-ap148-add-memory-node.patch
|
ipq806x: add support for non-dt enabled ap148 bootloader
|
2015-08-04 23:09:43 +00:00 |
|
030-hwspinlock-core-add-device-tree-support.patch
|
ipq806x: add hwspinlock support
|
2015-08-17 06:17:47 +00:00 |
|
031-hwspinlock-qcom-Add-support-for-Qualcomm-HW-Mutex-bl.patch
|
ipq806x: add hwspinlock support
|
2015-08-17 06:17:47 +00:00 |
|
032-hwspinlock-qcom-Correct-msb-in-regmap_field.patch
|
ipq806x: add hwspinlock support
|
2015-08-17 06:17:47 +00:00 |
|
033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch
|
ipq806x: add hwspinlock support
|
2015-08-17 06:17:47 +00:00 |
|
034-soc-qcom-Add-device-tree-binding-for-SMEM.patch
|
ipq806x: add SMEM support
|
2015-08-17 06:17:58 +00:00 |
|
035-soc-qcom-Add-Shared-Memory-Manager-driver.patch
|
ipq806x: add SMEM support
|
2015-08-17 06:17:58 +00:00 |
|
036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch
|
ipq806x: add SMEM support
|
2015-08-17 06:17:58 +00:00 |
|
037-mtd-add-SMEM-parser-for-QCOM-platforms.patch
|
ipq806x: add QCOM SMEM based MTD parser
|
2015-08-17 06:18:04 +00:00 |
|
100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch
|
ipq806x: add platform usb support
|
2015-04-03 19:06:30 +00:00 |
|
101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
|
ipq806x: switch AP148 to using SMEM based MTD parser
|
2015-08-17 06:18:15 +00:00 |
|
102-soc-qcom-gsbi-Add-support-for-ADM-CRCI-muxing.patch
|
kernel: update 3.18 to 3.18.14
|
2015-05-21 19:32:46 +00:00 |
|
103-ARM-DT-ipq8064-Add-TCSR-support.patch
|
ipq806x: add platform usb support
|
2015-04-03 19:06:30 +00:00 |
|
110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch
|
kernel: update 3.18 to 3.18.14
|
2015-05-21 19:32:46 +00:00 |
|
111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
|
ipq806x: add pcie support to ipq806x based platforms
|
2015-05-10 11:47:09 +00:00 |
|
112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
|
ipq806x: add pcie support to ipq806x based platforms
|
2015-05-10 11:47:09 +00:00 |
|
114-pcie-add-ctlr-init.patch
|
ipq806x: fix PCIe reset gpio handling - the core already handles the active-low flag
|
2015-11-21 10:55:29 +00:00 |
|
115-add-pcie-aux-clk-dts.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
120-mfd-qcom-rpm-Driver-for-the-Qualcomm-RPM.patch
|
ipq806x: add power regulators support
|
2015-05-23 15:27:54 +00:00 |
|
121-mfd-qcom_rpm-Add-support-for-IPQ8064.patch
|
ipq806x: add power regulators support
|
2015-05-23 15:27:54 +00:00 |
|
122-mfd-devicetree-bindings-Add-Qualcomm-RPM-DT-binding.patch
|
kernel: update 3.18 to 3.18.16
|
2015-06-17 09:54:55 +00:00 |
|
123-mfd-devicetree-qcom_rpm-Document-IPQ8064-resources.patch
|
ipq806x: add power regulators support
|
2015-05-23 15:27:54 +00:00 |
|
124-regulator-rpm-add-support-for-RPM-controller-SMB208.patch
|
ipq806x: replace caf nss-gmac driver by upstream stmmac
|
2015-05-29 12:26:01 +00:00 |
|
125-regulator-qcom-rpm-Add-missing-state-flag-in-call-to.patch
|
ipq806x: replace caf nss-gmac driver by upstream stmmac
|
2015-05-29 12:26:01 +00:00 |
|
126-add-rpm-to-ipq8064-dts.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
130-clk_mux-Fix-set_parent-doing-the-wrong-thing-when-IN.patch
|
ipq806x: replace caf nss-gmac driver by upstream stmmac
|
2015-05-29 12:26:01 +00:00 |
|
131-clk-Add-__clk_mux_determine_rate_closest.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
132-clk-Add-clk_unregister_-divider-gate-mux-to-close-me.patch
|
ipq806x: replace caf nss-gmac driver by upstream stmmac
|
2015-05-29 12:26:01 +00:00 |
|
133-ARM-Add-Krait-L2-register-accessor-functions.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
134-clk-mux-Split-out-register-accessors-for-reuse.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
136-clk-Add-safe-switch-hook.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
138-clk-qcom-Add-HFPLL-driver.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
140-clk-qcom-Add-support-for-Krait-clocks.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
142-clk-qcom-Add-Krait-clock-controller-driver.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
|
ipq806x: add & enable cpufreq support
|
2015-05-23 15:28:02 +00:00 |
|
144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch
|
ipq806x: fix uninitialized variable usage in cpufreq-krait
|
2015-09-10 10:09:42 +00:00 |
|
150-dmaengine-Rework-dma_chan_get.patch
|
ipq806x: Add ADM support
|
2015-08-07 08:36:16 +00:00 |
|
151-dmaengine-Remove-the-need-to-declare-device_control.patch
|
ipq806x: Add ADM support
|
2015-08-07 08:36:16 +00:00 |
|
152-dmaengine-Make-channel-allocation-callbacks-optional.patch
|
ipq806x: Add ADM support
|
2015-08-07 08:36:16 +00:00 |
|
153-dmaengine-Introduce-a-device_config-callback.patch
|
ipq806x: Add ADM support
|
2015-08-07 08:36:16 +00:00 |
|
154-dmaengine-Add-device_terminate_all-callback.patch
|
ipq806x: Add ADM support
|
2015-08-07 08:36:16 +00:00 |
|
155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
|
ipq806x: Add ADM support
|
2015-08-07 08:36:16 +00:00 |
|
156-dmaengine-Add-ADM-driver.patch
|
ipq806x: Add ADM support
|
2015-08-07 08:36:16 +00:00 |
|
157-ARM-DT-ipq8064-Add-ADM-device-node.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
160-clk-qcom-Add-EBI2-clocks-for-IPQ806x.patch
|
ipq806x: add NAND flash controller support
|
2015-08-07 08:36:31 +00:00 |
|
161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch
|
ipq806x: add NAND flash controller support
|
2015-08-07 08:36:31 +00:00 |
|
162-mtd-nand-Qualcomm-NAND-controller-driver.patch
|
ipq806x: add NAND flash controller support
|
2015-08-07 08:36:31 +00:00 |
|
163-dt-bindings-qcom_nandc-Add-DT-bindings.patch
|
ipq806x: add NAND flash controller support
|
2015-08-07 08:36:31 +00:00 |
|
164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
300-arch-arm-force-ZRELADDR-on-arch-qcom.patch
|
kernel: update kernel 3.18 to version 3.18.23
|
2015-11-01 13:45:57 +00:00 |
|
301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch
|
ipq806x: ap148/r7500: fix eth0 for non gige speeds
|
2015-12-02 22:16:23 +00:00 |
|
302-mtd-qcom-smem-rename-rootfs-ubi.patch
|
ipq806x: rename "rootfs" to "ubi" on nand
|
2015-09-04 14:44:44 +00:00 |
|
700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch
|
ipq806x: add NAND flash controller support
|
2015-08-07 08:36:31 +00:00 |
|
701-stmmac_update_to_4.3.patch
|
ipq806x: update stmmac to the version from linux 4.3
|
2015-11-22 19:06:51 +00:00 |
|
707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
|
ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
|
2015-11-21 10:54:58 +00:00 |
|
708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
|
ipq806x: ap148/r7500: fix eth0 for non gige speeds
|
2015-12-02 22:16:23 +00:00 |
|
709-stmac-platform-add-support-for-retreiving-mac-from-m.patch
|
ipq806x: update stmmac to the version from linux 4.3
|
2015-11-22 19:06:51 +00:00 |
|
710-stmmac-fix-ipq806x-DMA-configuration.patch
|
ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues
|
2015-11-22 21:59:22 +00:00 |
|
801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
|
ipq806x: Add support for Netgear D7800
|
2016-01-19 10:16:36 +00:00 |
