mirror of https://github.com/hak5/openwrt-owl.git
1923d63318
Linux now has device tree support for malta. The patch for correcting /proc/iomem content is not needed now. Previously it was root@(none):/# cat /proc/iomem 00000000-00000fff : reserved 00001000-000effff : System RAM 000f0000-000fffff : reserved 00100000-0fffefff : System RAM 00100000-003f2b6b : Kernel code 003f2b6c-00485937 : Kernel data ... Now it's root@OpenWrt:/# cat /proc/iomem 00000000-0fffefff : System RAM 00100000-004a3297 : Kernel code 004a3298-0057cfff : Kernel data ... The kernel config was prepared as follows 1. cp target/linux/malta/config-{3.18,4.4} 2. make kernel_menuconfig CONFIG_TARGET=subtarget_platform Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 48543 |
||
---|---|---|
.. | ||
base-files/etc | ||
be | ||
be64 | ||
image | ||
le | ||
le64 | ||
Makefile | ||
README | ||
config-4.4 |
README
This Malta target is intended to be used with the Qemu emulator. It can be used to prototype an OpenWrt firmware for MIPS processors. One could also use it to troubleshoot MIPS applications without access to real hardware. To use the images built by OpenWrt with qemu, use the following commands: For the little-endian image: qemu-system-mipsel -kernel bin/malta/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256 For the big-endian image: qemu-system-mips -kernel bin/malta/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256 and enjoy the system bootin.