Go to file
Felix Fietkau 4cb436429b mac80211: upgrade to latest compat-wireless, fix ad-hoc interface setup
SVN-Revision: 18023
2009-10-11 00:36:23 +00:00
docs Add documentation for passphrase option. 2009-09-24 21:50:17 +00:00
include adjust pointer size from 4 to 8 bytes in x86_64 site config 2009-10-04 00:44:32 +00:00
package mac80211: upgrade to latest compat-wireless, fix ad-hoc interface setup 2009-10-11 00:36:23 +00:00
scripts getver: don't use "-r COMMITTED" arg which needs network access to the repository, use the "Last Changed Rev:" line instead 2009-10-05 09:30:53 +00:00
target ssb: sync with wireless-2.6 2009-10-11 00:36:06 +00:00
toolchain gcc: add llvm-gcc and llvm from trunk (does not successfully compile a target yet, but gets close) 2009-10-10 19:25:48 +00:00
tools gmp: upgrade to 4.3.1 and fix compile on 64-bit mac os x 2009-09-25 09:28:26 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add external toolchain support, enhance native toolchain support (special thanks to Luigi Mantellini for his help... and patience ;) 2009-09-23 02:27:38 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
rules.mk add external toolchain support, enhance native toolchain support (special thanks to Luigi Mantellini for his help... and patience ;) 2009-09-23 02:27:38 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org