mirror of https://github.com/hak5/openwrt-owl.git
105 lines
3.4 KiB
Diff
105 lines
3.4 KiB
Diff
From: =?UTF-8?q?Ezequiel=20Garc=C3=ADa?= <ezequiel@vanguardiasur.com.ar>
|
|
Date: Wed, 4 Nov 2015 13:13:42 -0300
|
|
Subject: [PATCH] mtd: pxa3xx_nand: Fix initial controller configuration
|
|
|
|
The Data Flash Control Register (NDCR) contains two types
|
|
of parameters: those that are needed for device identification,
|
|
and those that can only be set after device identification.
|
|
|
|
Therefore, the driver can't set them all at once and instead
|
|
needs to configure the first group before nand_scan_ident()
|
|
and the second group later.
|
|
|
|
Let's split pxa3xx_nand_config in two halves, and set the
|
|
parameters that depend on the device geometry once this is known.
|
|
|
|
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
---
|
|
|
|
--- a/drivers/mtd/nand/pxa3xx_nand.c
|
|
+++ b/drivers/mtd/nand/pxa3xx_nand.c
|
|
@@ -1420,34 +1420,43 @@ static int pxa3xx_nand_waitfunc(struct m
|
|
return NAND_STATUS_READY;
|
|
}
|
|
|
|
-static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info)
|
|
+static int pxa3xx_nand_config_ident(struct pxa3xx_nand_info *info)
|
|
{
|
|
struct platform_device *pdev = info->pdev;
|
|
struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
- struct pxa3xx_nand_host *host = info->host[info->cs];
|
|
- struct mtd_info *mtd = host->mtd;
|
|
- struct nand_chip *chip = mtd->priv;
|
|
|
|
- /* configure default flash values */
|
|
+ /* Configure default flash values */
|
|
+ info->chunk_size = PAGE_CHUNK_SIZE;
|
|
info->reg_ndcr = 0x0; /* enable all interrupts */
|
|
info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
|
|
info->reg_ndcr |= NDCR_RD_ID_CNT(READ_ID_BYTES);
|
|
- info->reg_ndcr |= NDCR_SPARE_EN; /* enable spare by default */
|
|
+ info->reg_ndcr |= NDCR_SPARE_EN;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void pxa3xx_nand_config_tail(struct pxa3xx_nand_info *info)
|
|
+{
|
|
+ struct pxa3xx_nand_host *host = info->host[info->cs];
|
|
+ struct mtd_info *mtd = host->mtd;
|
|
+ struct nand_chip *chip = mtd->priv;
|
|
+
|
|
info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
|
|
info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
|
|
info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
|
|
-
|
|
- return 0;
|
|
}
|
|
|
|
static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
|
|
{
|
|
+ struct platform_device *pdev = info->pdev;
|
|
+ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
uint32_t ndcr = nand_readl(info, NDCR);
|
|
|
|
/* Set an initial chunk size */
|
|
info->chunk_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
|
|
info->reg_ndcr = ndcr &
|
|
~(NDCR_INT_MASK | NDCR_ND_ARB_EN | NFCV1_NDCR_ARB_CNTL);
|
|
+ info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
|
|
info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
|
|
info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
|
|
return 0;
|
|
@@ -1636,10 +1645,7 @@ static int pxa3xx_nand_scan(struct mtd_i
|
|
if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
|
|
goto KEEP_CONFIG;
|
|
|
|
- /* Set a default chunk size */
|
|
- info->chunk_size = PAGE_CHUNK_SIZE;
|
|
-
|
|
- ret = pxa3xx_nand_config_flash(info);
|
|
+ ret = pxa3xx_nand_config_ident(info);
|
|
if (ret)
|
|
return ret;
|
|
|
|
@@ -1652,7 +1658,6 @@ static int pxa3xx_nand_scan(struct mtd_i
|
|
}
|
|
|
|
KEEP_CONFIG:
|
|
- info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
|
|
if (info->reg_ndcr & NDCR_DWIDTH_M)
|
|
chip->options |= NAND_BUSWIDTH_16;
|
|
|
|
@@ -1737,6 +1742,10 @@ KEEP_CONFIG:
|
|
host->row_addr_cycles = 3;
|
|
else
|
|
host->row_addr_cycles = 2;
|
|
+
|
|
+ if (!pdata->keep_config)
|
|
+ pxa3xx_nand_config_tail(info);
|
|
+
|
|
return nand_scan_tail(mtd);
|
|
}
|
|
|