mirror of https://github.com/hak5/openwrt-owl.git
122 lines
4.1 KiB
Diff
122 lines
4.1 KiB
Diff
From 5c56f76995691cf761f66d6d89a00eea80be660c Mon Sep 17 00:00:00 2001
|
|
From: John Crispin <blogic@openwrt.org>
|
|
Date: Fri, 20 Jul 2012 19:01:00 +0200
|
|
Subject: [PATCH 12/15] Document: devicetree: add OF documents for lantiq xway
|
|
pinctrl
|
|
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
|
|
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Cc: devicetree-discuss@lists.ozlabs.org
|
|
Cc: linux-kernel@vger.kernel.org
|
|
---
|
|
.../bindings/pinctrl/lantiq,xway-pinumx.txt | 97 ++++++++++++++++++++
|
|
1 file changed, 97 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
|
|
|
|
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
|
|
new file mode 100644
|
|
index 0000000..b5469db
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
|
|
@@ -0,0 +1,97 @@
|
|
+Lantiq XWAY pinmux controller
|
|
+
|
|
+Required properties:
|
|
+- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9"
|
|
+- reg: Should contain the physical address and length of the gpio/pinmux
|
|
+ register range
|
|
+
|
|
+Please refer to pinctrl-bindings.txt in this directory for details of the
|
|
+common pinctrl bindings used by client devices, including the meaning of the
|
|
+phrase "pin configuration node".
|
|
+
|
|
+Lantiq's pin configuration nodes act as a container for an abitrary number of
|
|
+subnodes. Each of these subnodes represents some desired configuration for a
|
|
+pin, a group, or a list of pins or groups. This configuration can include the
|
|
+mux function to select on those group(s), and two pin configuration parameters:
|
|
+pull-up and open-drain
|
|
+
|
|
+The name of each subnode is not important as long as it is unique; all subnodes
|
|
+should be enumerated and processed purely based on their content.
|
|
+
|
|
+Each subnode only affects those parameters that are explicitly listed. In
|
|
+other words, a subnode that lists a mux function but no pin configuration
|
|
+parameters implies no information about any pin configuration parameters.
|
|
+Similarly, a pin subnode that describes a pullup parameter implies no
|
|
+information about e.g. the mux function.
|
|
+
|
|
+We support 2 types of nodes.
|
|
+
|
|
+Definition of mux function groups:
|
|
+
|
|
+Required subnode-properties:
|
|
+- lantiq,groups : An array of strings. Each string contains the name of a group.
|
|
+ Valid values for these names are listed below.
|
|
+- lantiq,function: A string containing the name of the function to mux to the
|
|
+ group. Valid values for function names are listed below.
|
|
+
|
|
+Valid values for group and function names:
|
|
+
|
|
+ mux groups:
|
|
+ exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
|
|
+ ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
|
|
+ spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2,
|
|
+ gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
|
|
+ req3
|
|
+
|
|
+ additional mux groups (XR9 only):
|
|
+ mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4
|
|
+
|
|
+ functions:
|
|
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio
|
|
+
|
|
+
|
|
+
|
|
+Definition of pin configurations:
|
|
+
|
|
+Required subnode-properties:
|
|
+- lantiq,pins : An array of strings. Each string contains the name of a pin.
|
|
+ Valid values for these names are listed below.
|
|
+
|
|
+Optional subnode-properties:
|
|
+- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
|
|
+ 0: none, 1: down, 2: up.
|
|
+- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
|
|
+
|
|
+Valid values for XWAY pin names:
|
|
+ Pinconf pins can be referenced via the names io0-io31.
|
|
+
|
|
+Valid values for XR9 pin names:
|
|
+ Pinconf pins can be referenced via the names io0-io55.
|
|
+
|
|
+Example:
|
|
+ gpio: pinmux@E100B10 {
|
|
+ compatible = "lantiq,pinctrl-xway";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&state_default>;
|
|
+
|
|
+ #gpio-cells = <2>;
|
|
+ gpio-controller;
|
|
+ reg = <0xE100B10 0xA0>;
|
|
+
|
|
+ state_default: pinmux {
|
|
+ stp {
|
|
+ lantiq,groups = "stp";
|
|
+ lantiq,function = "stp";
|
|
+ };
|
|
+ pci {
|
|
+ lantiq,groups = "gnt1";
|
|
+ lantiq,function = "pci";
|
|
+ };
|
|
+ conf_out {
|
|
+ lantiq,pins = "io4", "io5", "io6"; /* stp */
|
|
+ lantiq,open-drain;
|
|
+ lantiq,pull = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
--
|
|
1.7.10.4
|
|
|