Go to file
Gabor Juhos 451dd745bd generic: ar8216: cleanup function/variable names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35642
2013-02-17 12:48:25 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include kernel: update linux 3.7 to 3.7.8 2013-02-15 07:36:15 +00:00
package hostapd: fix the scan wait patch for multiple interfaces 2013-02-16 19:00:34 +00:00
scripts scripts: bundle-libraries.sh: support mixing 32bit and 64bit binaries 2013-01-28 15:54:27 +00:00
target generic: ar8216: cleanup function/variable names 2013-02-17 12:48:25 +00:00
toolchain toolchain/eglibc: add support for 2.17 2013-02-07 17:34:53 +00:00
tools firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1 2013-02-13 16:51:24 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in allow using sstrip with musl 2013-01-29 23:05:43 +00:00
LICENSE
Makefile build: it is no longer necessary to call make target/linux/clean as part of make clean 2012-12-02 15:26:28 +00:00
README
feeds.conf.default
rules.mk rules.mk: only select latest libgcc.a with wildcard match (#12798) 2013-01-13 20:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org