Felix Fietkau 4419978f84 madwifi: keep a/g mode and pureg setting in sync across vaps ... SVN-Revision: 12363		2008-08-21 14:54:51 +00:00
..
acx	acx: fix firmware download URL	2008-07-14 10:23:36 +00:00
acx-mac80211	acx: fix firmware download URL	2008-07-14 10:23:36 +00:00
admswconfig	…
ar7-atm	…
arptables	arptables: Update to 0.0.3-3	2008-06-22 18:40:30 +00:00
ath9k	disable ath9k on all platforms without pci support, not just uml	2008-08-20 15:46:46 +00:00
b43	Update b43 to work in AP mode	2008-08-13 19:37:40 +00:00
base-files	upgrade to uci 0.5.0, adds list handling support	2008-08-20 15:38:51 +00:00
br2684ctl	switch the br2684 default to routed mode instead of bridged mode, as it's more common	2008-08-11 13:02:44 +00:00
bridge-utils	rename patch	2008-08-20 13:58:09 +00:00
broadcom-57xx	remove some unused crap	2008-06-15 11:15:35 +00:00
broadcom-diag	broadcom-diag: reset the interrupt mask of configured leds to avoid spurious interrupts	2008-07-31 01:33:14 +00:00
broadcom-mmc	…
broadcom-wl	add vif selection fix for the broadcom-wl wifi script (thx, sn9)	2008-08-16 17:00:27 +00:00
busybox	remove empty patches left over after [12348]	2008-08-20 15:20:19 +00:00
button-hotplug	button-hotplug: fix compile warnings	2008-07-26 16:32:12 +00:00
comgt	This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com>	2008-07-21 20:36:16 +00:00
dnsmasq	add section names to dnsmasq config	2008-08-19 22:05:41 +00:00
dropbear	make opkg the default package manager, disable busybox ipkg from building by default	2008-08-16 06:35:14 +00:00
e2fsprogs	add a patch to use relative symlinks for development shared libraries	2008-08-20 16:01:33 +00:00
ebtables	ebtables: useless without kmod-eptables	2008-08-06 15:28:49 +00:00
fconfig	move the fconfig package into trunk	2008-05-27 13:21:12 +00:00
firewall	fix some firewall script typos (patch from #3897)	2008-08-17 12:01:01 +00:00
fuse	fix fuse: use in-kernel module for 2.6.25+ kernels	2008-05-11 22:27:32 +00:00
gdbserver	…
gpioctl	more use of the new GPIO_SUPPORT option	2008-05-02 00:30:39 +00:00
grub	make grub compilable under fedora core 8 and other newer distros	2008-08-02 15:15:33 +00:00
hostap-driver	…
hostap-utils	…
hostapd	Update hostapd to 0.6.4	2008-08-13 19:32:40 +00:00
hotplug2	remove warning from hotplug2, which pops up 10 times during boot	2008-08-04 08:04:16 +00:00
i2c-gpio-custom	i2c-gpio-custom: minor bugfix	2008-08-13 18:48:48 +00:00
ifenslave	…
ipkg	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
iproute2	package iproute2 has problems building on recent BSD-derived platforms because some programs to be run on the host use malloc.h in an incompatible way.	2008-08-08 21:49:17 +00:00
ipset	…
iptables	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
iw	enable iw for all 2.6 versions	2008-07-31 02:43:42 +00:00
ixp4xx-microcode	switch to a different NPE-C firmware	2008-07-12 16:28:50 +00:00
kernel	fix kmod-ipt-imq module generation (closes: #3896)	2008-08-21 13:17:47 +00:00
kexec-tools	kexec for powerpc actually only support ps3 or gamecube, not magicbox for instance	2008-08-06 20:20:02 +00:00
libertas	…
libnl	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
libpcap	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
libtool	…
linux-atm	…
lua	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
mac80211	Allow mac80211 drivers to work in master mode	2008-08-13 19:35:29 +00:00
madwifi	madwifi: keep a/g mode and pureg setting in sync across vaps	2008-08-21 14:54:51 +00:00
mmc_over_gpio	Update gpiommc to use configfs	2008-07-20 19:34:09 +00:00
mtd	add support for appending a file to jffs2 during reflash on the fly	2008-08-08 22:43:19 +00:00
ncurses	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
nozomi	…
nvram	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
openssl	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
opkg	remove unneeded line	2008-08-16 16:46:11 +00:00
p54	remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long)	2008-05-26 22:57:51 +00:00
pcmcia-cs	…
ppp	fixes ppp ipv6 scripts, signed-off-by: Alina Friedrichsen	2008-07-29 23:40:19 +00:00
pptp	ppp/pptp fixes: - prevent ppp from logging to /etc/ppp/connect-errors (closes: #2989) - add dependency on ppp and kmod-gre to pptp - bump release number	2008-05-03 12:11:35 +00:00
ps3-utils	add ps3-dump-bootloader to package install	2008-05-05 21:49:24 +00:00
qos-scripts	…
robocfg	…
rt61	Mark rt61 as 2.6.23 only (#3337)	2008-04-17 17:11:34 +00:00
rt2500	remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long)	2008-05-26 22:57:51 +00:00
rt2570	…
spi-ks8995	fixes ipkg dependency bug for spi modules, #3272	2008-07-30 00:27:21 +00:00
switch	(4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered	2008-06-15 11:10:27 +00:00
uboot-ifxmips	move ifxmips uboot to package/	2008-06-28 19:53:41 +00:00
ubsec_ssb	ubsec ssb is only available on brcm47xx	2008-07-16 10:15:12 +00:00
uci	upgrade to uci 0.5.0, adds list handling support	2008-08-20 15:38:51 +00:00
udev	add missing udevextras package option - edd_id	2008-05-05 21:58:03 +00:00
util-linux-ng	add missing dependencies on libblkid/libuuid for mount-utils/swap-utils (should close: #3730), bump release number	2008-08-20 16:04:21 +00:00
w1-gpio-custom	import w1-gpio-custom driver from the Squidge (http://squidge.sourceforge.net/) project	2008-04-29 18:31:43 +00:00
wireless-tools	package shared library as well (partially closes: #3030)	2008-04-14 02:06:35 +00:00
wpa_supplicant	Fix a bug when parsing ca_cert and eap_type with wpa_supplicant, this should only be set for 802.1x setups	2008-08-13 13:30:27 +00:00
wrt55agv2-spidevs	use the spi-ks8995 driver on the WRT55AG v2 boards	2008-04-17 13:12:57 +00:00
yamonenv	…
zlib	use $(FPIC) in a few places where it matters	2008-08-06 22:10:29 +00:00
Makefile	Generate gzipped package lists - Can be used by changing the src line in /etc/ipkg.conf to src/gz - Cannot be used by busybox ipkg	2008-07-29 03:36:11 +00:00