openwrt-owl/target/linux/ipq806x/patches-4.9/859-msm-pinctrl-Add-support...

237 lines
7.6 KiB
Diff

From e77af7de404eb464f7da9e0daeb8b362cc66a7ba Mon Sep 17 00:00:00 2001
From: Ram Chandra Jangir <rjangir@codeaurora.org>
Date: Tue, 9 May 2017 11:45:00 +0530
Subject: [PATCH] msm: pinctrl: Add support to configure ipq40xx GPIO_PULL bits
GPIO_PULL bits configurations in TLMM_GPIO_CFG register
differs for IPQ40xx from rest of the other qcom SoC's.
This change add support to configure the msm_gpio_pull
bits for ipq40xx, It is required to fix the proper
configurations of gpio-pull bits for nand pins mux.
IPQ40xx SoC:
2'b10: Internal pull up enable.
2'b11: Unsupport
For other SoC's:
2'b10: Keeper
2'b11: Pull-Up
Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
---
drivers/pinctrl/qcom/pinctrl-apq8064.c | 1 +
drivers/pinctrl/qcom/pinctrl-apq8084.c | 1 +
drivers/pinctrl/qcom/pinctrl-ipq4019.c | 8 ++++++++
drivers/pinctrl/qcom/pinctrl-ipq8064.c | 1 +
drivers/pinctrl/qcom/pinctrl-mdm9615.c | 1 +
drivers/pinctrl/qcom/pinctrl-msm.c | 21 ++++++++-------------
drivers/pinctrl/qcom/pinctrl-msm.h | 19 +++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-msm8660.c | 1 +
drivers/pinctrl/qcom/pinctrl-msm8916.c | 1 +
drivers/pinctrl/qcom/pinctrl-msm8960.c | 1 +
drivers/pinctrl/qcom/pinctrl-msm8x74.c | 1 +
11 files changed, 43 insertions(+), 13 deletions(-)
--- a/drivers/pinctrl/qcom/pinctrl-apq8064.c
+++ b/drivers/pinctrl/qcom/pinctrl-apq8064.c
@@ -597,6 +597,7 @@ static const struct msm_pinctrl_soc_data
.groups = apq8064_groups,
.ngroups = ARRAY_SIZE(apq8064_groups),
.ngpios = NUM_GPIO_PINGROUPS,
+ .gpio_pull = &msm_gpio_pull,
};
static int apq8064_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/qcom/pinctrl-apq8084.c
+++ b/drivers/pinctrl/qcom/pinctrl-apq8084.c
@@ -1206,6 +1206,7 @@ static const struct msm_pinctrl_soc_data
.groups = apq8084_groups,
.ngroups = ARRAY_SIZE(apq8084_groups),
.ngpios = NUM_GPIO_PINGROUPS,
+ .gpio_pull = &msm_gpio_pull,
};
static int apq8084_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
@@ -1531,6 +1531,13 @@ static const struct msm_pingroup ipq4019
PINGROUP(99, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
};
+static const struct msm_pinctrl_gpio_pull ipq4019_gpio_pull = {
+ .no_pull = 0,
+ .pull_down = 1,
+ .keeper = 0,
+ .pull_up = 2,
+};
+
static const struct msm_pinctrl_soc_data ipq4019_pinctrl = {
.pins = ipq4019_pins,
.npins = ARRAY_SIZE(ipq4019_pins),
@@ -1539,6 +1546,7 @@ static const struct msm_pinctrl_soc_data
.groups = ipq4019_groups,
.ngroups = ARRAY_SIZE(ipq4019_groups),
.ngpios = 100,
+ .gpio_pull = &ipq4019_gpio_pull,
};
static int ipq4019_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c
+++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c
@@ -630,6 +630,7 @@ static const struct msm_pinctrl_soc_data
.groups = ipq8064_groups,
.ngroups = ARRAY_SIZE(ipq8064_groups),
.ngpios = NUM_GPIO_PINGROUPS,
+ .gpio_pull = &msm_gpio_pull,
};
static int ipq8064_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/qcom/pinctrl-mdm9615.c
+++ b/drivers/pinctrl/qcom/pinctrl-mdm9615.c
@@ -444,6 +444,7 @@ static const struct msm_pinctrl_soc_data
.groups = mdm9615_groups,
.ngroups = ARRAY_SIZE(mdm9615_groups),
.ngpios = NUM_GPIO_PINGROUPS,
+ .gpio_pull = &msm_gpio_pull,
};
static int mdm9615_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -203,11 +203,6 @@ static int msm_config_reg(struct msm_pin
return 0;
}
-#define MSM_NO_PULL 0
-#define MSM_PULL_DOWN 1
-#define MSM_KEEPER 2
-#define MSM_PULL_UP 3
-
static unsigned msm_regval_to_drive(u32 val)
{
return (val + 1) * 2;
@@ -238,16 +233,16 @@ static int msm_config_group_get(struct p
/* Convert register value to pinconf value */
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- arg = arg == MSM_NO_PULL;
+ arg = arg == pctrl->soc->gpio_pull->no_pull;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- arg = arg == MSM_PULL_DOWN;
+ arg = arg == pctrl->soc->gpio_pull->pull_down;
break;
case PIN_CONFIG_BIAS_BUS_HOLD:
- arg = arg == MSM_KEEPER;
+ arg = arg == pctrl->soc->gpio_pull->keeper;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- arg = arg == MSM_PULL_UP;
+ arg = arg == pctrl->soc->gpio_pull->pull_up;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg = msm_regval_to_drive(arg);
@@ -304,16 +299,16 @@ static int msm_config_group_set(struct p
/* Convert pinconf values to register values */
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- arg = MSM_NO_PULL;
+ arg = pctrl->soc->gpio_pull->no_pull;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- arg = MSM_PULL_DOWN;
+ arg = pctrl->soc->gpio_pull->pull_down;
break;
case PIN_CONFIG_BIAS_BUS_HOLD:
- arg = MSM_KEEPER;
+ arg = pctrl->soc->gpio_pull->keeper;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- arg = MSM_PULL_UP;
+ arg = pctrl->soc->gpio_pull->pull_up;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
/* Check for invalid values */
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -98,6 +98,16 @@ struct msm_pingroup {
};
/**
+ * struct msm_pinctrl_gpio_pull - pinctrl pull value bit field descriptor
+ */
+struct msm_pinctrl_gpio_pull {
+ unsigned no_pull;
+ unsigned pull_down;
+ unsigned keeper;
+ unsigned pull_up;
+};
+
+/**
* struct msm_pinctrl_soc_data - Qualcomm pin controller driver configuration
* @pins: An array describing all pins the pin controller affects.
* @npins: The number of entries in @pins.
@@ -106,6 +116,7 @@ struct msm_pingroup {
* @groups: An array describing all pin groups the pin SoC supports.
* @ngroups: The numbmer of entries in @groups.
* @ngpio: The number of pingroups the driver should expose as GPIOs.
+ * @gpio_pull_val: The pull value bit field descriptor.
*/
struct msm_pinctrl_soc_data {
const struct pinctrl_pin_desc *pins;
@@ -115,6 +126,14 @@ struct msm_pinctrl_soc_data {
const struct msm_pingroup *groups;
unsigned ngroups;
unsigned ngpios;
+ const struct msm_pinctrl_gpio_pull *gpio_pull;
+};
+
+static const struct msm_pinctrl_gpio_pull msm_gpio_pull = {
+ .no_pull = 0,
+ .pull_down = 1,
+ .keeper = 2,
+ .pull_up = 3,
};
int msm_pinctrl_probe(struct platform_device *pdev,
--- a/drivers/pinctrl/qcom/pinctrl-msm8660.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8660.c
@@ -979,6 +979,7 @@ static const struct msm_pinctrl_soc_data
.groups = msm8660_groups,
.ngroups = ARRAY_SIZE(msm8660_groups),
.ngpios = NUM_GPIO_PINGROUPS,
+ .gpio_pull = &msm_gpio_pull,
};
static int msm8660_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/qcom/pinctrl-msm8916.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8916.c
@@ -967,6 +967,7 @@ static const struct msm_pinctrl_soc_data
.groups = msm8916_groups,
.ngroups = ARRAY_SIZE(msm8916_groups),
.ngpios = NUM_GPIO_PINGROUPS,
+ .gpio_pull = &msm_gpio_pull,
};
static int msm8916_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/qcom/pinctrl-msm8960.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8960.c
@@ -1244,6 +1244,7 @@ static const struct msm_pinctrl_soc_data
.groups = msm8960_groups,
.ngroups = ARRAY_SIZE(msm8960_groups),
.ngpios = NUM_GPIO_PINGROUPS,
+ .gpio_pull = &msm_gpio_pull,
};
static int msm8960_pinctrl_probe(struct platform_device *pdev)
--- a/drivers/pinctrl/qcom/pinctrl-msm8x74.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8x74.c
@@ -1069,6 +1069,7 @@ static const struct msm_pinctrl_soc_data
.groups = msm8x74_groups,
.ngroups = ARRAY_SIZE(msm8x74_groups),
.ngpios = NUM_GPIO_PINGROUPS,
+ .gpio_pull = &msm_gpio_pull,
};
static int msm8x74_pinctrl_probe(struct platform_device *pdev)