mirror of https://github.com/hak5/openwrt-owl.git
147 lines
4.5 KiB
Diff
147 lines
4.5 KiB
Diff
From 6f92d02f7af5a9b5ed5ded7dbeb18bf2bbb2ad85 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Tue, 24 Feb 2015 13:40:50 +0000
|
|
Subject: [PATCH] pinctrl-bcm2835: Fix interrupt handling for GPIOs 28-31 and
|
|
46-53
|
|
|
|
Contrary to the documentation, the BCM2835 GPIO controller actually has
|
|
four interrupt lines - one each for the three IRQ groups and one common. Rather
|
|
confusingly, the GPIO interrupt groups don't correspond directly with the GPIO
|
|
control banks. Instead, GPIOs 0-27 generate IRQ GPIO0, 28-45 GPIO1 and
|
|
46-53 GPIO2.
|
|
|
|
Awkwardly, the GPIOS for IRQ GPIO1 straddle two 32-entry GPIO banks, so it is
|
|
cleaner to split out a function to process the interrupts for a single GPIO
|
|
bank.
|
|
|
|
This bug has only just been observed because GPIOs above 27 can only be
|
|
accessed on an old Raspberry Pi with the optional P5 header fitted, where
|
|
the pins are often used for I2S instead.
|
|
---
|
|
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 51 ++++++++++++++++++++++++++---------
|
|
1 file changed, 39 insertions(+), 12 deletions(-)
|
|
|
|
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
|
@@ -47,6 +47,7 @@
|
|
#define MODULE_NAME "pinctrl-bcm2835"
|
|
#define BCM2835_NUM_GPIOS 54
|
|
#define BCM2835_NUM_BANKS 2
|
|
+#define BCM2835_NUM_IRQS 3
|
|
|
|
#define BCM2835_PIN_BITMAP_SZ \
|
|
DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
|
|
@@ -82,13 +83,13 @@ enum bcm2835_pinconf_param {
|
|
|
|
struct bcm2835_gpio_irqdata {
|
|
struct bcm2835_pinctrl *pc;
|
|
- int bank;
|
|
+ int irqgroup;
|
|
};
|
|
|
|
struct bcm2835_pinctrl {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
- int irq[BCM2835_NUM_BANKS];
|
|
+ int irq[BCM2835_NUM_IRQS];
|
|
|
|
/* note: locking assumes each bank will have its own unsigned long */
|
|
unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
|
|
@@ -99,7 +100,7 @@ struct bcm2835_pinctrl {
|
|
struct gpio_chip gpio_chip;
|
|
struct pinctrl_gpio_range gpio_range;
|
|
|
|
- struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
|
|
+ struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_IRQS];
|
|
spinlock_t irq_lock[BCM2835_NUM_BANKS];
|
|
};
|
|
|
|
@@ -385,17 +386,16 @@ static struct gpio_chip bcm2835_gpio_chi
|
|
.can_sleep = false,
|
|
};
|
|
|
|
-static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
|
|
+static int bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
|
|
+ unsigned int bank, u32 mask)
|
|
{
|
|
- struct bcm2835_gpio_irqdata *irqdata = dev_id;
|
|
- struct bcm2835_pinctrl *pc = irqdata->pc;
|
|
- int bank = irqdata->bank;
|
|
unsigned long events;
|
|
unsigned offset;
|
|
unsigned gpio;
|
|
unsigned int type;
|
|
|
|
events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
|
|
+ events &= mask;
|
|
events &= pc->enabled_irq_map[bank];
|
|
for_each_set_bit(offset, &events, 32) {
|
|
gpio = (32 * bank) + offset;
|
|
@@ -403,7 +403,30 @@ static irqreturn_t bcm2835_gpio_irq_hand
|
|
|
|
generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
|
|
}
|
|
- return events ? IRQ_HANDLED : IRQ_NONE;
|
|
+
|
|
+ return (events != 0);
|
|
+}
|
|
+
|
|
+static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
|
|
+{
|
|
+ struct bcm2835_gpio_irqdata *irqdata = dev_id;
|
|
+ struct bcm2835_pinctrl *pc = irqdata->pc;
|
|
+ int handled = 0;
|
|
+
|
|
+ switch (irqdata->irqgroup) {
|
|
+ case 0: /* IRQ0 covers GPIOs 0-27 */
|
|
+ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff);
|
|
+ break;
|
|
+ case 1: /* IRQ1 covers GPIOs 28-45 */
|
|
+ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000) |
|
|
+ bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
|
|
+ break;
|
|
+ case 2: /* IRQ2 covers GPIOs 46-53 */
|
|
+ handled = bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return handled ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
|
|
@@ -992,8 +1015,6 @@ static int bcm2835_pinctrl_probe(struct
|
|
for (i = 0; i < BCM2835_NUM_BANKS; i++) {
|
|
unsigned long events;
|
|
unsigned offset;
|
|
- int len;
|
|
- char *name;
|
|
|
|
/* clear event detection flags */
|
|
bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
|
|
@@ -1008,10 +1029,15 @@ static int bcm2835_pinctrl_probe(struct
|
|
for_each_set_bit(offset, &events, 32)
|
|
bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
|
|
|
|
+ spin_lock_init(&pc->irq_lock[i]);
|
|
+ }
|
|
+
|
|
+ for (i = 0; i < BCM2835_NUM_IRQS; i++) {
|
|
+ int len;
|
|
+ char *name;
|
|
pc->irq[i] = irq_of_parse_and_map(np, i);
|
|
pc->irq_data[i].pc = pc;
|
|
- pc->irq_data[i].bank = i;
|
|
- spin_lock_init(&pc->irq_lock[i]);
|
|
+ pc->irq_data[i].irqgroup = i;
|
|
|
|
len = strlen(dev_name(pc->dev)) + 16;
|
|
name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
|
|
@@ -1068,6 +1094,7 @@ static struct platform_driver bcm2835_pi
|
|
.remove = bcm2835_pinctrl_remove,
|
|
.driver = {
|
|
.name = MODULE_NAME,
|
|
+ .owner = THIS_MODULE,
|
|
.of_match_table = bcm2835_pinctrl_match,
|
|
},
|
|
};
|