openwrt-owl

Go to file

John Crispin 43771202d3 update lantiq/falcon patches SVN-Revision: 27406		2011-07-03 17:38:11 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	extend squashfs padding for 256k flash sectors	2011-07-03 17:37:46 +00:00
package	add kmod for dm9000	2011-07-03 17:37:18 +00:00
scripts	download.pl: cope with potential two-digit linux versions	2011-07-03 15:00:24 +00:00
target	update lantiq/falcon patches	2011-07-03 17:38:11 +00:00
toolchain	eglibc: remove old versions	2011-07-02 09:47:00 +00:00
tools	tools: always build mpc, now that older gcc versions have been eliminated, fixes #9642	2011-07-02 10:49:15 +00:00
.gitignore	add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org